CNC lathe

Nakamura-Tome WT250 II

Condition: like new (used), Year of construction: 2022, CMZ TA 20 YS-640: YEAR: 2022 CNC: Fanuc 32i FEATURES: Swing over bed: 760 mm Swing over carriage: 600 mm Maximum turning diameter: 460 mm Maximum turning length: 640 mm Distance between chuck faces: 649 mm X-axis travel: 310 mm Z-axis travel: 640 mm Y-axis travel: +70 / –50 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min MAIN SPINDLE: SMW 210 mm chuck Bar capacity: 66 mm Spindle speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Spindle nose: ASA 6 A2 Spindle bore: 73 mm TURRET: 12-station turret, all positions live tooling Max. live tool speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm SUBSPINDLE (Servo): SMW 175 mm chuck Kdjdpfx Acoyzfbvscol Chuck bar capacity: 56 mm Max. usable bar: 52 mm Spindle speed: 4,500 rpm Power: 14 / 18 kW Spindle nose: ASA 6 A2 Machine dimensions: 2,542 x 1,760 x 2,120 mm Weight: 7,500 kg EQUIPMENT: SMW Autoblok BBD 250 chuck SMW Autoblok BBD 175 chuck Tool presetter Servomotor for sub-chuck Set of tool holders including 2 live tool holders Chip conveyor Cycle end lamp High-pressure pump Manual/automatic parts catcher arm (80 x 220 mm – 8 kg) Parts ejector for sub-spindle Interface for bar feeder and mist extractor Set of fixed and live tool holders Set of 3 jaws for each chuck TOP AUTOMAZIONI X-files S-364 SX bar feeder, 3,200 mm/diameter 64 mm MACHINE CONDITION: Machine in excellent, as-new condition! Can be seen in operation.

Condition: excellent (used), Star SA-12 Swiss-Type Lathe Technical Specifications Rapid feed (X, Y, Z, ZB): 370 mm Maximum turning feed (X, Y, Z, ZB): 270 mm Smallest input unit (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive: Spindle drive Main spindle motor: 2.2 / 3.7 kW Main spindle indexing angle: 1° or 15° Main spindle bore: 20 mm Tool slide Type: Linear slide Number of tools: 6 tools Kedpowi Ty Aefx Accsdl Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1970 / 2330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Pick-up spindle Max. clamping diameter: 13 mm Max. part length for forward ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8000 rpm Pick-up spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Power supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF OFFER Among other things: (list not exhaustive): STAR SA-12 Swiss-Type Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Loader Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Kjdpfx Aovvi Htoccedl Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Kdjdpfsv S U Izjx Accsl Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank Kedev S Svvopfx Accodl - immediately available

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 11 - Number of motorized positions : 5 - Live tools speed : 5.000 [rpm] - Live tools power : 1,2 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 6,2 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.711 x 1.275 [mm] - Machine height : 1.705 [mm] MACHINE HOURS - Number of working hours : 18436 [h] Kodpfsyxr Uqox Accsdl - Number of spindle hours : 14949 [h] EQUIPMENT - CNC : Fanuc 32i-B - 3 colors status lamp - Rotating guide bush - Coolant tank - Bar loader : FMB TURBO 3- 36 - Ejection of workpiece - Parts catcher - Parts conveying strip - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, Year of construction: 2018, Opportunity to buy an excellent Bystronic ByStar fiber laser with 4000 x 2000 mm working area and 6000W laser output (Dynamix edition F6000). Including: V1 cutting head (first version) NCT zle Changer 64 Pos. Detection Eye Kedpfjx Tcvnox Accjdl Dust extraction system 1 Basic Machine 1.1 ByStar Fiber 4020 Dynamic Edition F6000 1.2 Scope of Delivery 1.3 Safety and Guidelines 1.4 Complete Documentation 1.5 Power Cut Fiber 1.6 ByPos Fiber 1.7 Cut Control Fiber 1.8 Scanning 1.9 Swap Table 1.10 Laser Source 1.11 Cooling Unit 1.12 Tank Heater 1.13 Machine Control and User Interface 1.14 Uninterruptible Power Supply 1.15 Condition Messenger 1.16 Maintenance Messenger 1.17 Cutting Plan Editor 1.18 Restart Manager 1.19 System Manager 1.20 Cutting Parameter Assistant 1.21 OPC Interface Cutting 1.22 Handheld Control Unit 1.23 Electrical Connection 1.24 Compressed Air (Machine, Laser Source, Cooling Unit, Dust Extraction System) 1.25 Material Specification 1.26 Cutting Gas 1.27 Environmental conditions 1.28 Structural requirements Immediately available and can be inspected under power upon appointment. Working dimensions: 4000 x 2000 mm Laser output: 6000W Power On hours: 49086h Cutting hours: 18659h

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,850 h, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, total height: 2,985 mm, overall weight: 5,000 kg, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It features a SIEMENS 828 D CNC controller, with X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It includes a tool magazine with 30 slots and additional equipment like a chip conveyor and an electronic handwheel. Contact us for more information about this machine. Additional equipment • Electronic Handwheel • Chip conveyor • Oil skimmer Kodpfx Ajx D E H Isccjdl • Emulsion flushing gun • 2 x Hydraulic vice • 25 x Clamping chuck BT40 Machine Benefits Technical Machine Benefits • Table dimensions: 1000 x 450 mm • Distance spindle nose - table surface: 150 - 775 mm • Max. Tool diameter with free neighboring places: 125 mm • Max. Tool diameter with occupied neighboring places: 80 mm Extra Information Machine still under power Dimensions Machine Depth 2158 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 7 Kdsdpoxlum Tsfx Accol - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 END ATTACHMENT - Number of positions : 7 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1200 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 34143 [h] - Number of working hours : 26657 [h] - Number of spindle hours : 15552 [h] EQUIPMENT - CNC : Fanuc 30i-model A - HFT (High Frequency Turning) - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : FMB turbo 3-26 / 3200 A

Condition: excellent (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 41 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, spindle motor power: 11,000 W, quill diameter: 50 mm, quill stroke: 110 mm, turning diameter over bed slide: 435 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: cycle-controlled WEILER E30X750 CNC lathe with Siemens 810 D control. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: Good, fully functional Location: Austria (Graz) Inspection: On site or via video call by arrangement Pictures/Video: Additional photos and videos of the machine in operation available upon request. Power-on hours (machine energized): 26,492 h The actual operating hours are significantly lower. Based on experience, spindle run time (actual turning) accounts for approx. 30% to 50% of this (i.e. approx. 8,000 to 13,000 hours). Technical specifications: Working area: Center height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Center distance: 750 mm Lathe spindle: Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Max. torque at spindle: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: stepless Feed / rapid traverse Feed drive: Three-phase AC feed motors Feed range (stepless): Longitudinal: 0.001–50 mm/rev (Note: also specified 0–20 mm/rev) Face: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Face: 3,000 N Max. rapid traverse speed longitudinal/face: 8 / 4 m/min (Note: also specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 tpi Tailstock / quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Kdjdpfx Acjvphv Tocol Dimensions / weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1,800 × 1,350 × 1,700 mm Interested? Contact us for further information or to arrange a viewing appointment.