Automatic lathe

Nanjing Szerszámgépgyár C1336

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 Pgjdpow Ed Tfsfx Aa Deg control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. chip conveyor ja/yes LNS total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachment: all comes with. It is the only one in the production.

Condition: new, Year of construction: 2025, * 250 lt Net Volume Pgedpfjh I N Udsx Aa Djg * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or * Pgjdpfx Aonah Tdea Deg

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Psdpfx Aju Iwyioa Dogg Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Condition: used, Year of construction: 1961, max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length 0 mm total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m Pgodpfx Aaewwl I Ij Djg The UMA was built in 1961 and the guides have been rebuilt.

Condition: as good as new (ex-display), Year of construction: 2020, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Pgedpfxsg Iihws Aa Dog Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: excellent (used), TSUGAMI-MORI BS32CE(S)-V is a CNC automatic lathe (CNC Swiss type) engineered for precision, high accuracy and reliable production. Working capacities: 7 axes, 2 spindles; max turning Ø 8–32 mm, max length 250 mm; drilling up to 12 mm, threading up to 10 M. Key specs: main spindle 200–7000 t/min, back spindle 200–6000 t/min; driven-tool speeds 200–5000 t/min; spindle motor 5.5 kW, back spindle 2.2 kW; feeds 1–6000 mm/min, rapid 20 m/min; 4 stations, 20 tools, 5 driven tools; weight ~2800 kg, size 2150×1500×1800 mm, air 5 bar. Accessories: LNS Express 332 bar loader (up to 3000 mm, Ø 3–32 mm), parts catcher, lamp, oil‑mist extractor, collet set, RS232 interface, status light. Delivers tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical. Pgedpfx Ajxx U Udea Dog

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm Psdpfx Aslilfbja Dsgg strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 12,000 rpm, turning diameter: 32 mm, overall weight: 7,000 kg, rapid traverse Z-axis: 20 m/min, power: 10.7 kW (14.55 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, C-axis Upper tool turret with X/Y/Z/H axis and 10 tool holders Lower tool turret with X/Y/Z/H axis and 9 tool holders Rear device with 8-fold total drive for 3 tools Hinged belt conveyor Resy paper band filter Traub tool monitoring FMB LSK 38 – bar feeder Pedox Diglepfx Aa Dsgg

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,500 rpm, number of axes: 9, This 9-axis Hanwha XDI32-N was manufactured in 2021, featuring a dual spindle system with a maximum speed of 6,500 rpm and power of 2.2/5.5 kW each. It supports a maximum work diameter of 32 mm and includes a 315-liter cooling tank. Ideal for precision Swiss-type turning, this machine ensures efficient and reliable performance. If you are looking to get high-quality turning capabilities, consider the Hanwha XDI32-N machine we have for sale. Contact us for more information. Pgedjx D Rn Dopfx Aa Djg • Power supply: 3-phase 200/220 VAC • Current: 60 A • Frequency: 50/60 Hz • Short-circuit nominal current: 20 kA • Press operation (compressed air): 4–6 kg/cm² (3.9–5.9 bar) • Pallet height: 1120 mm • Main spindle max work diameter: 32 mm • Secondary spindle motor type: integrated • Secondary spindle max work diameter: 32 mm • Secondary spindle bore diameter: 32 mm • Cooling tank capacity: 315 liters • Cooling pump power: 1.1 kW • Lubrication tank capacity: 1.8 liters • Lubrication pump power: 5 W • Lubrication consumption: 8 cc / 30 min • Pneumatic air consumption: 20–30 liters/min • X1-axis external diameter travel: 64 mm • Y1-axis external diameter travel: 383 mm • X2-axis external diameter travel: 100 mm • Y2-axis external diameter travel: 383 mm • X3-axis external diameter travel: 404 mm • Y3-axis external diameter travel: 283 mm