Shredder for PET - mill cutter

Nuga - Stadler CentriCut 44sr

Condition: refurbished (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, Features: - Cutting unit Crsdpfx Aew Elm Tsn Usc - Side wall extension in cutting area +300mm (one-piece) - Flat base plate on crawler chassis - Dust suppression - Engine compartment fire extinguishing unit

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Crjdpora Rbgofx An Uoc Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Year of construction: 2022, condition: as good as new (ex-display), Welding rotary table Protec KT 1200 Kg Motor infinitely variable swivel and speed adjustable Motor 0,75 KW Csdocrmyfopfx An Ujrc with remote control Foot switch Table diameter 1200mm height 1000mm length 1400mm width 1500mm Speed from 0,05 to 0,5 rpm

Condition: new, Year of construction: 2024, load capacity: 6,000 kg, Equipment: foot remote control, Welding turntable, tank turning device 6000 Kg load capacity with hand and foot remote control Crsdsgfql Aspfx An Uoc Diameter from 160mm to 4000 mm Drive rollers diameter 300mm Dimensions: length 1900mm x width 470mm x height 390mm Speed stepless 50 - 2000 mm / min. Motor AC 380 V

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Crodpfoqcuvwsx An Uec

Condition: good (used), Year of construction: 2010, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1234, overall weight: 24,000 kg, total length: 6,445 mm, total width: 2,925 mm, Technical specifications: • Drive: 2 × 160 kW (ABB) • Dimensions: approx. 6,445 × 2,925 × 3,111 mm • Weight: approx. 24,000 kg • Infeed opening: 2,825 × 2,030 mm • Rotor: length approx. 2,805 mm, speed approx. 355 rpm, 80 knives • Screens: 20 - 60 mm, manual replacement Design advantages: • Single-stage, efficient belt drive • Convenient hydraulic pusher for continuous operation • Quick service access to rotor and cutting chamber • Safety system protecting the drive • Adjustable granulation thanks to easy screen change • Fourfold usable knives – spare parts savings Crjdpfew R U Upox An Uoc Location: Trzebinia (Poland) – inspection possible.

Condition: used, Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Engine power: 15 kW / 2935 rpm -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm Crsdpfsrh Niaex An Uec -Weight: 395 kg

Year of construction: 2010, condition: used, Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW Codpfx Asn Srvyen Uorc -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, The float sink tank operates by immersing shredded plastic materials in water. Materials with a density less than water (e.g., certain polyolefins) float, while denser materials (e.g., PET, PVC) sink. The integrated drag conveyor facilitates the continuous removal of settled materials from the bottom of the tank, ensuring uninterrupted operation. Crsdpfswm Nd Eox An Uoc

Condition: as good as new (ex-display), Lorch turntable TURN 50 with counterpressure quill and control system Codoi Dtqfspfx An Ujrc