CNC lathe

Okuma GENOS L2000-e

Condition: used, TURNING CENTER "MORI SEIKI" MOD. ZL 200SMC With twin powered turret and sub-spindle CNC MSC-501 Turning length: 452 mm Max. turning diameter: 388 mm Max. diameter over bed: 510 mm Distance between centers: 751 mm Spindle mount: A2-6 Spindle speed: 4,000 rpm Spindle motor power: 11 kW Number of tools: 12 Tjdpexwxwtefx Abtjb

Condition: ready for operation (used), Year of construction: 2015, A vertical high-performance milling and thread machining center DMG Mori is available. Travel X/Y/Z: 700mm/420mm/380mm, max. workpiece dimensions X/Y: 880mm/550mm, table dimensions X/Y: 840mm/420mm, max. table load: 400kg, spindle speed: 10000rpm, spindle power: 25kW, torque: 45Nm, tool positions: 15, tool holder: BT30, rapid traverse: 60m/min, feed force: 5kN. Machine dimensions X/Y/Z: approx. 1650mm/2350mm/2500mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D Solutionline, machine hours: 28892h, spindle hours: 12674h. Documentation available. An on-site inspection is possible. Tsdpfxeynlu Uj Abtob

Condition: excellent (used), Year of construction: 2004, winch inkl. lifting capacity max. 2t. auf 2,7 Meter Tjdpeq N E U Ajfx Abteb lifting capacity max. 1 Tonne auf 5,3 Mete Number of working hours 270 h electrical ja

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB Todsyviigopfx Abteb ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 1,00,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Todpfx Abeymk E Aetob Width 2950 mm Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Tsdpfjx H Rmuox Abtsb Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Tjdpfx Abowzmpzjteb Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: used, Year of construction: 2022, HAAS ST25Y with counter-spindle, year 2022 maximum machining diameter: 298 mm, cutting length: 572 mm, spindle through-hole: 76 mm, 12-position BMT65 turret, Todpfx Abozk H Hvjtsb Y-axis travel: +/- 50.8 mm, HAAS control system, 3-jaw chuck, 254 mm, -counter-spindle -chip conveyor, -swarf tray with pump, -measuring probe, -parts catcher low operating hours, excellent condition.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm Tedpfx Abjyu Nqmjtjb X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: used, Year of construction: 2008, dimension of workpiece 2400 mm voltage 26,8 V Tsdjx Dda Tepfx Abtsb total power requirement 26,8 kW weight of the machine ca. 0,040 t