CNC lathe

Okuma GENOS L200E-MY

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, Hedelius Acura 65 Marathon, Year of manufacture 2022, Control system Heidenhain TNC 640, Horizontal travel X/Y/Z 700/650/650 mm, Vertical travel X/Y/Z 465/465/379 mm, 2-axis NC swivel table – rotary table 400 x 400 mm, Crsdpsznvbqsfx Aptsg Tool changer, 60 positions, Additional magazine, 180 positions, Spindle speed up to 14,000 rpm, Tool holder SK 40, Water-cooled milling spindle, Water-cooled A + C axes, 22-position pallet system, 15 pallets available, Pallet size 400 x 400 x 38 mm, Zero-point clamping system, Pallet storage system MARATHON P422, 5-axis simultaneous machining ACURA, Kinematics option, Formingstar package, Accuracy package for Z-axis, Internal compressed air supply, Sloping bed band filter system, Internal coolant supply 25 bar, Pressure booster pump 50 bar, Pre-filter for sloping bed band filter system, Exhaust air filter LTA 3001, Extended chip flushing system, 30-infrared measuring probe M&H, Laser control system, 50 spindle hours since last maintenance.

Condition: excellent (used), bore depth 500 mm spindle speed: 1 Cedpfoxx A D Tjx Aptorg

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm Crodpfswrm Dtsx Apteg >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: like new (used), Year of construction: 2022, operating hours: 521 h, functionality: fully functional, machine/vehicle number: L3M0474, turning length: 500 mm, turning diameter: 300 mm, total height: 2,210 mm, total length: 3,950 mm, total width: 2,260 mm, overall weight: 5,680 kg, Equipment: documentation/manual, used Okuma lathe As-new, well-maintained condition 521 operating hours 347 spindle hours Crodpfsy Rx Tdjx Aptog

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Year: 2007 No Tailstock Automatic doors Tool eye Chip conveyor Codpfx Apjyyxlfetjrg Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 1,00,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Credpfx Apoymk E Astjg Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1998, table mounting size: 765 x 400 mm Crodpfotwy Dijx Apteg movements x/y/z: 650/410/510 mm spindle taper: BT 40 min./max. distance table/spindle: ca. 90/690 mm spindle turning speed range: 80 - 8000 rpm number of tool positions: 20 pieces carriages: ca. 30 m/min rapid move: ca. 30 m/min electrical connection: 380 V, ca. 15 kVA kW space needed: 2300 x 2100 x 2650 mm weight: 4000 kg

Condition: ready for operation (used), A Mori Seiki CNC lathe is available. Swing diameter over bed/slide: 450mm/300mm, max. turning diameter: 160mm, turning length: 525mm, travel X/Z: 135mm/560mm, bar capacity: 42mm, spindle bore: 52mm, spindle nose: JIS A2-5, spindle speed: 5000rpm, power: 7.5kW, torque: 172Nm, tool stations: 12, tailstock taper: MK4, quill diameter: 75mm, quill stroke: 80mm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/1700mm, weight: approx. 3250kg, control: Fanuc Series 15-T. Documentation available. An on-site inspection is possible. Codpfx Ajzipf Sspterg

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 510 mm, turning length: 752 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, feed rate X-axis: 18,000 m/min, feed rate Z-axis: 24,000 m/min, CNC Lathe MORI SEIKI ZL-2035MC – Technical Data Sheet The MORI SEIKI ZL-2035MC is a high-precision CNC lathe, ideal for advanced multi-axis turning operations, featuring dual spindles and live tool turrets. Manufactured in December 2002, it is engineered to deliver productivity and accuracy in complex machining processes. General Specifications Brand: MORI SEIKI Model: ZL-2035MC Category: CNC Lathe Year of construction: 12/2002 CNC Control: MORI SEIKI MSG-501 Machine weight: 5,900 kg Machine Dimensions: Length: 4,350 mm Width: 2,400 mm Height: 2,200 mm Machining Capacities Max swing over bed: Ø 680 mm Max swing over carriage: Ø 510 mm Distance between centers: 752 mm Max turning diameter: Crjdpfx Apsxd Td Ujtjg Spindle No. 1: Ø 390 mm Spindle No. 2: Ø 294 mm Max turning length: 520 mm Bar capacity: Ø 65 mm (Ø 51 mm on No. 2) Axis Travels X Axis: No. 1: 235 mm No. 2: 175 mm Z Axis: No. 1: 520 mm No. 2: 490 mm B Axis: 505 mm Main Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-6 Chuck diameter: Ø 210 mm Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 11 / 7.5 kW Sub-Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-5 Chuck diameter: Ø 160 mm Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 7.5 / 5.5 kW Tool Turrets Turret No. 1 Number of stations: 12 Driven stations: Yes Driven tool speed: 4,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Turret No. 2 Number of stations: 8 Driven stations: Yes Driven tool speed: 3,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Rapid Feeds X axis rapid traverse: 18,000 mm/min Z axis rapid traverse: 24,000 mm/min B axis rapid traverse: 24,000 mm/min Manual feed for X / Z / B axes: 0 – 1,260 mm/min Included Accessories 5 live tool holders and various fixed toolholders Chip conveyor Transformer Part unloading arm Coolant tank with pumps Manuals, electrical diagrams, and CE Declaration

Condition: used, Year of construction: 2009, machine/vehicle number: V445C3-00236, Zoller Venturion 450 Precise measurement regardless of operator High degree of automation with CNC axes, autofocus, and rotary encoder Power-operated and universal tool clamping High-precision “ace” spindle clamps tools at the push of a button ZOLLER image processing “pilot 4.0” and large 24" monitor Crodpoy D D T Aefx Apteg Industrial high-resolution camera Next to the CNC machine, in the workshop, in manufacturing cells User-friendly