CNC lathe

Okuma LT 200-M

Condition: good (used), Year of construction: 2005, functionality: fully functional, turning length: 700 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, overall weight: 7,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Max.: 210 mm Bench turning diameter: 400 mm Max. machinable length: 700 mm X/Z travel: 192/700 mm Stroke against spindle (W-axis): 730 mm C-axis: 0.001° Rapid traverse X/Z: 30/32 m/min Main spindle speed: 5000 rpm Motor: 11/7.5 kW Rsdpfx Afozhwnrjhjcd 2 turrets: 12 stations Machine dimensions: 2700 x 2000 x 1980 mm Machine weight: 7000 kg Equipment: 2 turrets, 12 stations, VDI 30 Measuring tool IRCO SiMag

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 10 (18) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Rodpfx Afjyv Ipfshocd Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA - Model: LT 200-M TwinStar - Year of manufacture: 2006 Rcjdpfx Afjv S Su Sohsd

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Rcedper Nfvmsfx Afhsd Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system Rsdpocc D Ddofx Afhecd equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: used, Year of construction: 2021, Horizontal precision lathe M.C.M. ATL HEAVY PLUS 900x14000 with CNC control Fanuc Condition: Used Year of manufacture: 2021 Technical data: Centre height: 900 mm Swing diameter over bed: 1800 mm Swing diameter over cross slide: 1400 mm Distance between centres: 14000 mm Rjdpoywhhkefx Afhjcd Max. workpiece weight between centres: 15000/18000 kg Bed width: 1100 mm Number of bed ways: 3 (2+1) Equipment: - FANUC CNC control, model FANUC 32i-B with MANUAL GUIDE i - Automatic turret with 12 positions and driven tool stations (Baruffaldi) MOD. TBMA 320 BDI 60 + C-axis - Chip conveyor (front) - Chip conveyor (rear) - 2 steady rests, diameter up to 600 mm - 2 steady rests, diameter up to 1100 mm

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H Redpfx Asxwdw Ejfhecd spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2009, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China. Rcodpfxjxf Ii Us Afhed

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling Redpfxjw S Efzo Afhocd The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg Rcsdpfx Afetvf Htshod