Okuma component

Okuma Opus 5000 II Main Board II A E4809-045-086-A

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A / 1911-1509-44-90, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Njdpfxoi Eca Do Abuodd

Condition: good (used), Year of construction: 2006, operating hours: 21,437 h, functionality: fully functional, machine/vehicle number: 122574, Controller: OSP P200 L  Remarkably few spindle hours.    Max. turning diameter ø 720mm  2.000 mm distance between spindles  Spindle speed 3.500 rpm  Ndsdpfxjurfz Ij Abujd Spindle power 30 kW  Sub-spindle; spindle speed 3.800 rpm  Spindle power 22 kW  Spindle speed aangedr. Ger 5.000 rpm  Spindle power aangedr. Ger. 22 kW  Number ger. Under 12 Turret  Upper mill spindle HSK100 ATC 32 HSK 100   Y-axis 250 (+125 / 1-125) mm  Floor space: 6150 x 3073  

Condition: used, Year of construction: 1997, Distance between centers 2070 mm Swing over bed 700 mm Swing over carriage 430 mm Max turning diameter 460 mm diameter (2000 mm) Nodpfx Ajw Rkd Tobusdd Spindle bore 90 mm Spindle speeds 14-3200 rpm Z-axis movement 2070 mm X-axis movement 330 mm Turret w/12 stations Tailstock taper MT 5 Control: OSP 7000-L Equipped with: Hydraulic steady rest Chip conveyor 10-20 tool holders 10-20 sets of jaws

Condition: used, Year of construction: 2003, machine/vehicle number: 247078, Max. turning diameter: 630 mm Max. machinable diameter: 630 mm Max. distance between centers: 900 mm Travel: X-axis: 580 mm (+480 / –20 mm) Z-axis: 935 mm Y-axis: 160 mm (+80 / –80 mm) C-axis: 360° (in 0.001° increments) B-axis: 225° (–30° / +195°; in 0.001° increments) Spindle speed: 50 – 5,000 rpm Tailstock type: NC-controlled, MT5 Spindle nose: A2-8 Spindle bore: Ø 80 mm Spindle bearing diameter: Ø 120 mm Turret type: H1-ATC Tool holder: HSK-A63 Number of stations: 1 Tool magazine capacity: 40 tools Tool size: 25 × 25 mm Shank diameter: Ø 32 mm Max. tool diameter: Ø 90 mm Max. tool length: 300 mm Max. tool weight: 8 kg Nedpfx Aoxtn Erobuedd Driven tool power (5 min / continuous): VAC 11 / 7.5 kW Milling spindle speed: 50 – 6,000 rpm Milling spindle torque (5 min / continuous): 65.7 / 44.8 Nm Feed rate: 0.001 – 1,000 mm/rev Rapid traverse: X-axis: 40 m/min Z-axis: 40 m/min Y-axis: 26 m/min C-axis: 200 rpm B-axis: 30 rpm Spindle motor power (30 min / continuous): OKUMA PREX 15 / 11 kW Spindle motor torque (10 / 20 min / continuous): 412 / 281 Nm Feed axis motor power: Z-axis: OKUMA BL 2.8 kW X-axis: OKUMA BL 3.5 kW Y-axis: OKUMA BL 2.9 kW W-axis (tailstock): OKUMA BL 2.9 kW Coolant pressure through milling spindle: 20 bar Coolant pump capacity: 0.8 kW Machine dimensions (L × W × H): 4,035 × 2,257 × 2,587 mm Machine weight: 10,000 kg Control system: OKUMA OSP-P300SA Display: 15" touchscreen (OSP Suite)

Condition: ready for operation (used), Year of construction: 2018, Movement Nsdpjxc Rdpjfx Abusdd X-Axis Movement 1500 Y-Axis Movement 660 Z-Axis Movement 660 This 3-axis Okuma MB-66VB was manufactured in 2018 and features a robust vertical machining center design. It offers a large working area of 660 × 1530 mm, with X, Y, and Z travels of 1500 mm, 660 mm, and 660 mm respectively. The machine supports a load capacity of 1500 kg and achieves rapid traverse feed rates up to 40 m/min. Consider the opportunity to buy this Okuma MB-66VB vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit Nedpfx Ajxmirgsbusdd - Chip conveyor - Documentation - CE marking

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 6200 Control Unit Brand Okuma Model OSP P200-L Main Drive Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 2 Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 1 Additional Equipment Spindle oil chiller included Side chip conveyor (hinged belt type) Double foot pedal for chuck and tailstock control Includes transformer, manuals, parts list, and schematics General Data Machine weight 6200 Control Unit Brand Okuma Model OSP P200-L Main Drive Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 2 Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 1 Additional Equipment Spindle oil chiller included Side chip conveyor (hinged belt type) Double foot pedal for chuck and tailstock control Includes transformer, manuals, parts list, and schematics Ndodpfsw Rhaxex Abusd This 2-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2015, controller manufacturer: OKUMA, controller model: OSP P300S, number of spindles: 2, CONTROLS .. CNC controls OKUMA OSP P300S BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 2 .. number of y-axes: 1 .. number of b-axes: 1 WORKING RANGE TURNING .. swing diameter (max): 650 mm .. turning diameter (max): 650 mm .. bar diameter (max): 112 mm .. worpiece length max.: 2100 mm MAIN SPINDLE .. spindle revolutions (min): 30 /min .. spindle revolutions (max): 3000 /min .. spindle torque: 700 Nm .. spindle diameter: 112 mm .. spindle positioning: 0.001 ° .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 3800 /min .. spindle positioning: 0.001 ° .. c-axis: yes X/Z SLIDE .. Z-axis travel: 2100 mm .. X-axis travel: 695 mm .. Y-axis travel: 300 mm .. rotating range B-axis up to: 240 ° .. traverse velocity Z (max): 1000 mm/min .. traverse velocity X (max): 1000 mm/min .. traverse velocity Y (max): 1000 mm/min .. tool fixture: Milling Spindle .. - rotation speeds (max): 12000 /min .. - drive power: 22 kW TOOL MAGAZINE .. number of positions: 40 .. tool length max.: 400 mm .. tool weight max.: 10 kg X/Z SLIDE .. Z-axis travel: 1584 mm .. X-axis travel: 235 mm .. - counter spindle: yes ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz Ndjdpfx Ajxm Rtljbued DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6000 mm .. space requirements -front/back-: 3050 mm .. total height: 3030 mm .. total weight approx.: 19000 kg -Big Bore left spindle: Spindle holder A11 (Din 55026) Chuck is a SMW KNCS-N 325-104 - Tool holder (top) Milling spindle (Capto C6)

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Number of axis 4 Nedpfsxmbxlsx Abusdd Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Table Table load 1200 kg Tools Number of station 171 Type of tool holder HSK 100 This 4-axis Okuma MA 600H II was manufactured in 2019. It features a 630 × 630 mm table, capable of handling loads up to 1,200 kg, and a high-speed spindle up to 12,000 rpm. The machine offers rapid traverse rates of 60 m/min and a comprehensive tool magazine with 171 stations. If you are looking to get high-quality milling capabilities consider the Okuma MA 600H II machine we have for sale. Contact us for more information. Application Types Milling