AOI

OMRON VT-S720-A

Condition: like new (used), functionality: fully functional, Year of construction: 2018, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Njdpsy Nk Hajfx Airown Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Nedpfx Ajudk A Hjirswn

Condition: excellent (used), Year of construction: 2013, operating hours: 2,579 h, functionality: fully functional, input voltage: 380 V, We are offering this well-maintained JUKI GKG-GL, KE2070, KE2080, RS800N + Chiller SMT placement line, year of manufacture 2013. The line has low operating hours and was used exclusively for our own products. We are not a service provider; only single-shift operation. The line has been serviced annually by JUKI and is in excellent condition. KE2070 operating hours: 5751 h KE2080 operating hours: 2579 h Nwodjy Axcvopfx Airjn Due to circumstances, sale only as a complete line, no cherry-picking. Loader and unloader are included, but not the ones shown in the video – instead, units from Rommel will be supplied. Manufacturer: JUKI Model: GKG-GL, KE2070 (5751h), KE2080 (2579h), RS800N + Chiller Year of manufacture: 2013 Machine type: SMT placement line Available from the end of July 2026. We are happy to assist with dismantling and loading by a local specialist company. If you have any questions or need further information, please do not hesitate to contact us by message or phone.

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Njdpfxsylzhlo Airjwn

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm Nwsdeyatffjpfx Airen - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: excellent (used), Year of construction: 2020, operating hours: 829 h, Baader 588 Filleting Machine 2020, low hours, with spares Complete with IS026 Header Baader 61 knife sharpener Nwodpfx Aieyq Sbyjrsn 6 station trimming Line Infeeds/outfeeds, various conveyors Compressor Rare package!

Condition: good (used), Year of construction: 1991, Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, Nsdofx T Hfepfx Airewn -Body: made of stainless steel -Manufacturer BAADER Type 531 -Tilt height: 2500 mm (can be changed for an extra charge) -Max. tine width: 740 mm -Chain hoist: Demag, year of manufacture 2007 -Dimensions: 3800/890/H1060 mm -Weight: 326 kg -without documentation

Condition: good (used), Year of construction: 2010, functionality: fully functional, Phantomatic T3A incl. swivel device for angled head Machine features: - CamPlus - Barcode reader - Touchscreen - Overlength function up to 8000 mm - 6-sided machining Nwsdpfez Adx Hox Airsn - Swivel device for angled head - Angled head Travel range X-axis (longitudinal axis): 4300 mm Travel range Y-axis (transverse axis): 270 mm Travel range Z-axis (vertical axis): 300 mm Electric spindle 1 HSD – max. 18,000 rpm – power 5.5 kW Tool magazine capacity: 9 Angular gearbox for side machining, rotatable Number of clamping devices: 4 incl. automatic positioning of the clamping devices Weight: 1,950 kg

Condition: good (used), functionality: fully functional, Year of construction: 2012, For sale is our Viscom AOI/AXI inspection system. - Manufacturer: Viscom SE, Hanover - Type: X7056 RS - Inventory No.: ZES203249 - Year of manufacture: 09/2012 - Serial number: 101682 - Operating system: Windows 7 Professional, 64-bit - Software version: 9.00.7 - Camera configuration AOI: 8M (4x orthogonal, 8x angled) - AXI sensor: 5 XRAY detectors (image intensifiers) Power-on time: 92840 h XRAY-on time: 11462 h Nedpfx Aoxt Dkdoirown Condition of the X-ray tube: 5 (like new) The system is located in our warehouse and can be inspected at any time: Buchenstraße 18 / 93426 Roding The system has been inspected by our technician and found to be in good working order.

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Nedpfx Aijudkz Nsrswn