SMT placement line

JUKI GKG-GL, KE2070, KE2080, RS800N + Chiller

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm Gsdpfx Apelp Uz Re Debu stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Working area Grinding length: 250 mm Centre height: 100 mm Workpiece weight: 30 kg Z-axis: 350 mm Table adjustment: 8 ° degrees X-axis: 190 mm Grinding spindle Grinding wheel diameter max.: 500 mm Grinding wheel width max.: 80 mm Grinding wheel bore: 127 (203) Gjdpsvz Snkofx Ap Dobu Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Grinding wheel protection cover: D500 x 80mm Workpiece spindle Speed: 1 - 2,000 rpm Workpiece spindle mount: MK4 Tailstock Tailstock quill mount: MK3 Tailstock quill stroke length: 30 mm Cylinder fine adjustment range: ± 0.04 Equipment Paper belt filter system Rinse gun Mechanical fume extraction

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Gbedpfjn Htktex Ap Deu

Year of construction: 2017, condition: excellent (used), Alicona InfiniteFocusXL200 G5 Measuring System Positioning Volume: 200 mm × 200 mm × 200 mm Maximum Workpiece Weight: 30 kg Objective Magnifications: 2.5x, 5x, 10xHX, 10x, 20xHX, 20x, 50x, 100x Numerical Aperture: 0.075–0.8 Working Distance: 4.5–37 mm Lateral Measuring Range: 5.63 mm to 0.16 mm Vertical Resolution: 2300 nm to 10 nm Gbodsx Dxw Tspfx Ap Dju Measurement Noise: 800 nm to 1 nm Vertical Measuring Range: 8–36 mm Measuring Speed: up to 1.7 million measurement points/s Minimum Measurable Roughness Ra: 7 µm to 0.03 µm Minimum Measurable Roughness Sa: 3.5 µm to 0.015 µm Minimum Measurable Height: 2.3 µm to 0.01 µm Maximum Measurable Area: up to 40,000 mm² Flatness Accuracy: 0.1 µm (10x objective) No guarantee is given for the correctness, completeness, or up-to-dateness of the information.

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Gbjdpfxszn Iucj Ap Deu Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Measuring head

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is CNC control GE Fanuc 310is Gjdpfsy U N Hiox Ap Dsbu Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is an SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a single placement head featuring laser centering. The machine is fully operational and ready for use after programming. Technical Data: Type: placeALL 610 Year of manufacture: 2014 Placement rate: 600 components/hour Component sizes: 0402 chips up to 22x22 mm (alternatively up to 32x32 mm) Laser centering: non-contact, on-the-fly Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520 x 370 mm Placement area: 620 x 450 mm Tool: 5 x standard Additionally: Camera system: Vision System II + lighting Dispensing system: CD-05 placement tool & air blow function Frame adjustment; access for robot arm from the left Universal CAD conversion Barcode reader for ID barcode Camera attachment for LM, SM, FP systems Gbsdpfowy U Nmjx Ap Deu and much more. Feeders: - 2 pcs feeder racks with 16 slots each, for tape/tube feeders, front and rear side PA610 - 1 pc feeder rack with 22 slots, for tape/tube feeders, left and right side PA610/L - 20 pcs tape feeders 8 mm, max. tape thickness 1.1 mm, max. tape height 6.0 mm, max. tape width 8.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 4 pcs tape feeders 12 mm, max. tape thickness 1.4 mm, max. tape height 6.0 mm, max. tape width 12.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 2 pcs tape feeders 16 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 16.3 mm, max. roll width 30.5 mm, 2 slots each, barcode configurable, incl. feeder extension 908.120.007 - 1 pc tape feeder 24 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 24.3 mm, max. roll width 30.5 mm, 2 slots, barcode configurable, incl. feeder extension 908.120.007 - 1 pc vibration tube feeder, processes max. 10*SO sticks, 5 slots, barcode configurable - 1 pc feeder setup station with software for setting up and creating a complete component, PC connection via RS232 (PC not included) - 1 special PA wire feeder for feeding and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943 cassettes for 8 mm rolls, width 11 mm Transport and loading can be organized Europe-wide upon request for an additional fee. Prices are exclusive of VAT. Viewing available by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Year of construction: 2004, condition: good (used), functionality: fully functional, Selling 1 Juki FX-1 and 2 Juki FX-2 from current production. Please contact me if you have any questions. Gedpfx Apsvk R H Re Debu

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, The JCM-7000 combines simple sample navigation with a range of advanced automatic functions. A large sample chamber, high resolution, and an optional low vacuum mode for non-conductive samples make this desktop SEM a versatile, mobile all-rounder. Features: Gjdpfezn Ih Ajx Ap Debu • SE/BSE detection • Magnification up to x100,000, resolution approx. 8 nm • Low vacuum operation for non-conductive samples • Hardware and software integrated EDX system for elemental characterization • Live elemental analysis, live imaging (including 3D imaging/topography) • Intuitive operation with recipes, automatic functions, image montages, etc. • Large chamber for samples up to 80 mm diameter and 50 mm height • Compact & mobile • Dimensions (Main Unit): 324 mm W x 586 mm D x 566 mm H

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Gjdpfx Apjudk A He Debu