Metal mitre band saw machine

OPTIMUM SD 300 V

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 403 Alüminyum Pvc Kesim Makinası, • Compliant with CE standards. Nodpfx Ajramrzjh Rjcp • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting process. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees to the left and right. • Pneumatic vertical and horizontal press. • Ø600 or Ø650 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). • Oil spray system. • Precision cutting possible thanks to 3 kW motor and Hydro-check. • Can operate with a digital measuring system.

Condition: new, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: 268955558, GREMAC e1 trommel screen Tandem chassis / axles 2x kg ( permissible total weight) kg empty weight without aggregate Overrun brake Vehicle lighting according to StVzO TÜV acceptance Drum length: mm Diameter: mm 4,0 kW electric drive speed adjustable with frequency converter driving screw adjustable cleaning brush hopper with conveyor belt rubber belt with chevron profile 0,75 kW electric drive speed adjustable with frequency converter Fine grain collecting belt Movable suspension Rubber belt in smooth design 1,5 kW electric drive Speed adjustable with frequency converter Fine grain belt Movable suspension Rubber belt with chevron profile 2,2 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Over-grain stockpile conveyor Movable suspension Rubber belt with chevron profile 1,5 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Control system Ncjdpfx Asl Hbcfeh Rsp PLC Siemens Logo Control panel with buttons and potentiometers 400V load circuit 24V control circuit Main switch Ceekon 16A socket EMERGENCY OFF relay Without generator Cladding Hot galvanized frame parts painted drum cladding powder coated in RAL7005 and 5018 Further information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: new, functionality: fully functional, power: 18.2 kW (24.75 HP), fuel type: diesel, color: orange, operation weight: 2,200 kg, maximum load weight: 1,200 kg, tire condition: 100 %, shovel volume: 0.4 m³, suspension: steel, Year of construction: 2025, Equipment: 4 in one shovel, all wheel drive, cabin, hydraulics, pallet forks, ATTENTION – LAST MACHINE AVAILABLE! 🔥 The YX918 compact wheel loader is the perfect solution for those who need power, precision, and agility in confined spaces. With an operating weight of 2,200 kg, a reliable Kubota Euro V engine (18.2 kW), and modern hydraulics, this machine proves its worth in daily professional use. ⚠️ Only 1 unit left in stock – available while supplies last! Secure the last machine from this promotion now, before it’s gone! Ideal for construction sites, agriculture, yard work, logistics & municipal operations. ✅ Your advantages at a glance ✔ Extremely compact design – perfect for tight operating areas ✔ Powerful & fuel-efficient Kubota engine (Euro V) ✔ Smooth, precise hydrostatic drive ✔ Very tight turning radius – only 2,000 mm ✔ High stability despite narrow width ✔ Fast loading cycles & efficient lifting hydraulics ✔ Excellent value for money ⚙️ Technical data Operating weight: 2,200 kg Engine output: 18.2 kW (Kubota Euro V) Transmission model: 265 hydraulic torque converter Transmission type: Continuously variable transmission (CVT) Dimensions (L×W×H): 4650 × 1500 × 2200 mm Bucket capacity: 0.4 m³ Maximum lifting capacity: 1,200 kg Travel speed: 0–28 km/h Maximum gradeability: 25% Maximum dump height: 2.4–3.2 m Dump reach: 800 mm Turning radius: 2,000 mm Steering: Load-sensing full hydraulic steering Tyres: 8.25-16 | 350 kPa Gears: 2 forward / 2 reverse, high and low range Axle: Isuzu axle Lighting voltage: 24 V System voltage: 24 V Ncedpeyky E Hofx Ah Rop Battery capacity: 2-N60 Fuel tank: 40 L Hydraulic oil tank: 40 L 🛠 Standard equipment (included) ✔ Quick coupler ✔ Standard bucket ✔ 4-in-1 bucket ✔ Pallet forks ✔ Cabin heating ✔ Hydraulic joystick pilot control ✔ Toyota comfort seat ✔ Colour scheme: Orange-Black 🚚 Condition & Delivery ✔ Immediately available – last unit in stock! ✔ New, unused, from current production ✔ Factory-inspected & ready for work ✔ Not approved for public road use ✔ Fast shipping available across Europe 💰 PROMOTIONAL PRICE: €14,000 plus VAT 📍 Location: Rheda-Wiedenbrück 📅 Inspection by appointment possible 🔥 Act now – once it’s gone, it’s sold out! Take advantage of our attractive promotions – it’s worth your enquiry!

Year of construction: 2019, condition: ready for operation (used), An industrial knife grinding machine MVM for sharpening woodworking parts is available. Knife length: 6000mm, control: Siemens PLC with remote control. Includes an extraction system, a magnetic table, and a chip filter. Documentation available. An on-site inspection is possible. Njdpfx Aow I E Eash Rscp

Condition: ready for operation (used), functionality: fully functional, total height: 1,200 mm, total width: 580 mm, total length: 820 mm, input voltage: 230 V, The machine is designed for pitting plums, leaving the plums whole. Electrical connection: 230 V. Njdpfx Ajw H I Trsh Rjcp Machine dimensions mm: 820 x 580 x h1200. Originally, the machine is equipped with 10 blades, but 2 blades were already lost when it was purchased, but this does not interfere with the operation process at all. Only the yield is slightly lower. Productivity with 8 blades: 100 fruits / 1 minute Hole diameter: 30 mm. Machine weight: 100 kg.

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,210 kg, maximum load weight: 790 kg, overall weight: 2,000 kg, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, total length: 2,895 mm, Equipment: all wheel drive, Power steering, diesel, all-wheel drive, 18.2 kW, 1,319 cm³, 1 seat, easy-shift transmission, 9 forward gears + 9 reverse gears, shuttle gearbox, side-mounted gearshift, analog fuel gauge, rear swivel work lights, roll bar, 2 front weights at 15 kg each, 3 cylinders, power steering, total length 2,895 mm, weight 1,210 kg, bias-ply tires front: 6.0-12, rear: 8.30-20, permitted total weight 2,000 kg. FOR US, CONDITION AND GUT FEELING ARE MOST IMPORTANT; PRICE COMES SECOND. If you have any further questions, Mr. Faller will be happy to assist you at the given number. //* TRADE-IN, PART-EXCHANGE, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information is provided without guarantee. For more offers, visit our homepage. The description and specified data do not constitute a guarantee and are not binding. The only binding agreement is the sales contract concluded at the dealership upon purchase of the vehicle. Subject to errors and prior sale! Njdpewtpvuofx Ah Rscp

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Ncedpfxokh Niqe Ah Rsp Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg

Condition: new, Year of construction: 2026, CORMAK PBM290 horizontal drilling machine is a professional device created for efficient wood machining. It is equipped with advanced solutions ensuring perfect quality of finished products. Machine features high-quality guides, providing easy table height adjustment easy one-handed usage due to a well-placed handle simple and smooth table movement left/right spindle rotation 100 mm diameter extracting connector Table dimensions 500 x 200 mm Drilling table height 760–900 mm Maximum drilling width 300 mm Maximum drilling depth 140 mm Spindle speed 2850 rpm Drilling chuck 0–16 mm S1 continuous work motor power 2.2 kW Power supply 400V Dimensions 770 x 920 x 1245 mm Ncsdpsvuq Dkofx Ah Rjp Weight 102 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm Ncjdpfexta N Aex Ah Rjp - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Nsdpsrah S Hjfx Ah Recp Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm