PMT 9/24

Piemme 9/24

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Nodpjvwlqqofx Aa Dswb Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2002, 1) Bobst Dynaload prefeeder year 1998 2) Bobst Flexo 160 year 2002 n. 5 colors, Vacuum transport, rubber roller Bobst CUBE 3) Bobst SPO 160 A Matic year 2002 Introduction of suction cup Center Line II Stripping station with motorized Quick Lock tool clamping Batch delivery with gripper trim extraction Bobst CUBE 4) Castaldini Breaker year 2007 Nwedpfx Aajv Nywvs Djb

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm TRANSFER BOBST FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Nedsv Ifpuspfx Aa Dowb Possibility to sell them separately

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 2 identical machines available, year of manufacture 2021. The machines were only operated for a short period in test mode in a large warehouse, then professionally dismantled and stored. Therefore, they remain in very good, fully functional condition. Full documentation for the machines is available. The XF / XP 111 M is a fully automatic strapping machine with a top-mounted sealing unit. It was designed to vertically strap a high volume of pallets of varying sizes with PP or PET strapping. This system is reliable, easy to operate, and can be installed in confined spaces thanks to its compact dimensions. - For PP and PET strapping - Vertical strapping Nsdew Htz Iepfx Aa Dswb - Tension up to 5,500 N - Siemens PLC S7 - Compact design, minimal space requirement - Easy access to all mechanical components - Simple operation via touch screen The machines have been properly dismantled and stored – they are available immediately. Additionally, 90 brand-new rolls of original Cyklop strapping material, still sealed in their original packaging, are also optionally available.

Condition: used, COMPLETELY REVISED CE STANDARDS YEAR 2014 STAR FEED INTRODUCTION 3 COLORS FROM TOP COMPUTERIZED SLOTTING MACHINE ROTATING DIE CUTTER FOLDING WITH GLUING DEVICE ERO EJECTOR COUNTER EMMEPI FOLDING MACHINE SPARE CORDS AND KNIVES Nwedpjvnrqrsfx Aa Djb

Year of construction: 2002, condition: like new (used), Stainless Steel Shrink Wrapping Tunnel Wrapping Tunnel for packing products with strech foil, Producer: Schur Machine Model: E 340 Year of production: 2002 Complete Stainless Steel Tunnel Opening dimensions 750 x 400 mm. Nodpfehqfnlox Aa Djwb That is not used long time, like new one!

Year of construction: 2018, condition: as good as new (ex-display), Offer here as new machine for gluing shafts including corner gluing machine and many high quality tools. Box sizes: Minimum: 80x65x10 mm Nwsdpfeg U Irwox Aa Dsb Maximum: 430x350x120 mm More details and price after personal consultation

Condition: good (used), Year of construction: 1992, FOLDERGLUER MACHINE JAGENBERG + SEMIAUTOMATIC PACKER TÜNKERS DIANA 90-2 Year 1992 - Serial Nº 10.45183 Styles: straightline boxes, lockbottom boxes Material: Cardboard 200gr/m2 – 800gr/m2 Max. size: 900mm, Min. size: 450mm Speed: up to 450m/min Cold gluing unit HHS with 2 guns Nodpfov N Uptjx Aa Dowb Pneumatic press Box counter + kicker Semiautomatic packer TÜNKERS FAS 480, nº12/30381, year 1993 Power requirement: 27kW Electrical installation: 380V Total length: 12.8m Total width: 1.5m Weight: 6,500Kg Machine in production and in good condition Availability: Location: Europe

Condition: ready for operation (used), Year of construction: 1983, BOBST SPO 1600 Max Speed 5000 per hour Year 1983 Nwedexcayyspfx Aa Djb Max lenght 1075mm Max width 1580mm Fully reconditioned by Bobst 2015 Central line

Condition: new, MVD Synchronized Hydraulic Bending Press Ready in stock unless sold out! Mod. I-Bend D 3100/320 Color Videographic Numerical Control ESA S875 W *dxf Controlled axes No. 8 ( Y1-Y2-X-R-Z1-Z2-X5_A1) WILA motorized compensation table Multi-beam barriers NEW ELECTRONICS DSP LASER UNIMEC high-speed motorized rear register (Made in Italy) GIVI MISURE optical scales (Made in Italy) Bending length mm 3100 Nedpfx Ajrqvtmoa Djwb Power exerted Ton 320 Recess mm 510 Stroke mm 410 Opening mm 635 Upper tools and lower die ROLLERS supplied