Center Lathe

PINACHO SC 200-42-1000

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Hodpshzbipefx Agwoni Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,500 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,670 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 2,135 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Center height: 260 mm Center distance: 1500 mm Spindle bore: 78 mm Hnjdpfx Agoctutmowei Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: excellent (used), Ansemi parallel lathe, Mono FAP 325 ES type, distance between centres mm1500, centre height mm 325, bar passage mm65, motor power kw18, dimensions mm: 3300x1200x1700h weight kg3260 Hodewcd Hmspfx Agwjni

Condition: new, Universal milling machine Make: OPTimill Model: MT 50 Item no.: 3336005 Condition: New machine Travels: - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm Hjdpfx Aebnfxujgwoni - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 2 identical machines available, year of manufacture 2021. The machines were only operated for a short period in test mode in a large warehouse, then professionally dismantled and stored. Therefore, they remain in very good, fully functional condition. Full documentation for the machines is available. The XF / XP 111 M is a fully automatic strapping machine with a top-mounted sealing unit. It was designed to vertically strap a high volume of pallets of varying sizes with PP or PET strapping. This system is reliable, easy to operate, and can be installed in confined spaces thanks to its compact dimensions. Hnedpew Htz Iefx Agwei - For PP and PET strapping - Vertical strapping - Tension up to 5,500 N - Siemens PLC S7 - Compact design, minimal space requirement - Easy access to all mechanical components - Simple operation via touch screen The machines have been properly dismantled and stored – they are available immediately. Additionally, 90 brand-new rolls of original Cyklop strapping material, still sealed in their original packaging, are also optionally available.

Condition: used, mileage: 12,08,995 km, power: 280 kW (380.69 HP), first registration: 12/1995, fuel type: diesel, number of seats: 52, gearing type: mechanical, color: red, brakes: retarder, Equipment: ABS, air conditioning, bathroom, parking heater, Mileage according to speedometer Engine: Mercedes-Benz V8 Euro: not known Gearbox: 8-speed manual Seats: 49+1+2 high/fixed with lap belts Standing room: 48 _____ safety * Retarder Hnodpsu Rzglsfx Agwji * Cruise control * ABS, ASR * Fog lights Passenger compartment * Auxiliary heating * Air conditioning * Curtains * Luggage racks * Luggage nets * Jet ventilation * Double glazing * Refrigerator * Center WC * Head covers * Tour guide microphone Exterior * Double-width door * Power steering * Tachograph with windshield * Sun visor * Electric exterior mirrors * Ski boot eyelets * Central locking * Roof hatches, fans, roof ventilators Audio & communication * Radio/cassette * Video Miscellaneous * German vehicle registration document * Vehicle dimensions: Length 12.00 m, width 2.50 m, height 3.33 m * hubcaps * Twin tires * Approx. tires: VA.: 20%, HA.: 20% * Our internal vehicle number: 11137 Errors excepted. Pictures and text may differ from the vehicle. Over 300 vehicles always on offer.

Condition: used, Year of construction: 2013, turning diameter over bed slide: 435 mm, turning diameter over top slide: 245 mm, center height: 210 mm, center width: 1,500 mm, overall weight: 1,700 kg, Technical data Manufacturer: Weiler Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Centre height: 210 mm Centre distance: 1,500 mm Spindle bore: 52 mm Speed range: 20 – 2,500 rpm, stepless Drive power: 10.5 kW Dimensions (approx.): L 2.2 x W 1.0 x H 1.7 m Weight: 1.7 t Hedpfxsykakpe Agweni Equipment • Stepless speed control • HEIDENHAIN digital readout on 3 axes • 3- and 4-jaw chucks, manufacturer Röhm Duro • Multifix toolholder + 10 inserts • Collet chuck Fahrion + approx. 33 collets • Fixed and travelling steady rest • Various live and dead centres + drill chuck • Coolant system • Documentation HEIDENHAIN ND 780 digital position display • 3-axis readout for bed, cross slide, and top slide • Tool memory for 16 tools, with one reference point per axis • Summation key for Z and Zo • Switchable between imperial/metric • X-axis traverse as radius or diameter display • Delta key for "distance-to-go" display to zero • Display resolution up to 1 µm • "Freeze" actual position • Taper calculator All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Hsdpfxstwliwe Agwjni Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LZ280/3, turning diameter over cross slide: 190 mm, spindle bore: 43 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 670 mm, quill stroke: 90 mm, quill diameter: 45 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 30 rpm, GDW precision lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful lead and feed spindle lathe with stepless speed control from 30–4000 rpm. The standard paint finish includes RAL 7035 (light gray) for the housing and RAL 7016 (anthracite gray) for the substructure, splash guard hood and chuck guard. Equipment & accessories: ✅ 3-axis position indicator with 6" color display ✅ Quick-change tool holder Multifix A including 1 turning tool holder ✅ Coolant system & central lubrication ✅ Chip tray, splash guard & spindle brake ✅ LED machine light & collet board K32 ✅ Electromechanical limit switch device for thread/feed ✅ Tool cabinet with telescopic extension including operating tools Additional equipment package (optional): Hjdpfx Agsv Dan Dewjni ➕ Three-jaw chuck Ø 160 mm (up to 4,600 rpm) ➕ Keyless drill chuck (3-16 mm, B16/MK3) ➕ Live center MK3 & drill bit holder ➕ 4 additional turning tool holders & 1 drill bit holder 📦 Delivery: ✔️ Disposable packaging & safe transport including insurance Perfect for precise and demanding turning operations in industry and trade! 🚀

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Hsdpscirnisfx Agwoni Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates