3-axis machining centre

POS POSmill C 1050

Condition: used, Year of construction: 2011, total height: 3,000 mm, total length: 4,200 mm, total width: 2,500 mm, overall weight: 7,800 kg, POS PosMill Type C1050 – Universal Milling MachineUniversal milling machine with travel paths X 1,050 mm / Y 530 mm / Z 630 mm and table size 1,150 x 560 mm.CNC control HEIDENHAIN iTNC 530.Hydraulic system for precise movements.Equipment: Coolant system and chip conveyor.Machine with protective devices and emergency stop system. Travel X-axis: 1050 - mm Control: Heidenhain iTNC 530 Godpey S Nh Iofx Ag Souh Dimensions of the clamping surface: 1150 x 560 mm Travel Y-axis: 530 - mm Table length: 1,150 mm Dimensions (LxWxH) approx.: 4200 x 2500 x 3000 mm Weight approx.: 7,800 kg Travel Z-axis: 630 - mm Year of construction: 2,011 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 Gedpfozv Syfox Ag Seuh The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Guedpfx Aoy Sf Azjg Sjh Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head • Travels (X/Y/Z): 2,500 / 920 / 820 mm • Table: 3.100 × 900 mm · max load 3.000 kg • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min • Tool magazine: 120 tools • Control: HEIDENHAIN iTNC 530 Guedpfx Agoy Skmro Soh Brand new Spindle installed as end of April 2026

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Guodjzi Ra Rspfx Ag Ssh Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Equipment: - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Max. turning length: 600 mm Gjdpfx Ajy Dqb Teg Souh Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Spindle nose: A2 - 8 Machine weight: 6,700 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. Guedpfsvx N Shsx Ag Sjh The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: excellent (used), Year of construction: 2009, Hwacheon Cutex 160, Year 2009 CNC Control Fanuc OT i 12-station turret LNS bar feeder (max. bar diameter 42 mm) Tool package (including driven tool holders) Chip conveyor Tailstock Technical data: Swing diameter over bed: 550 mm Max. turning diameter: 300 mm Max. turning length: 300 mm X-axis travel: 170 mm Z-axis travel: 335 mm C-axis Max. bar capacity: 45 mm Spindle speed: 6000 rpm Gusdpfsyc Nryex Ag Soh Turret: 12 stations Rapid traverse X: 36 m/min Rapid traverse Z: 36 m/min Drive power: 20 kW Machine weight approx.: 3200 kg

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Gedpsv Syyvjfx Ag Sjuh Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: EC1606, grinding length: 1,200 mm, grinding width: 500 mm, grinding wheel diameter: 400 mm, distance table to spindle center: 700 mm, grinding wheel width: 50 mm, overall weight: 6,100 kg, grinding spindle speed: 1,500 rpm, space requirement height: 2,600 mm, space requirement length: 4,600 mm, space requirement width: 2,200 mm, Like-new, lightly used surface grinder. In very good condition. Gedpfxey Rxuhe Ag Ssuh Includes digital display on the Y-axis (SINO SDS6).