High pressure built-in unit 150-300bar 30-75l

PTC Salmon

Year of construction: 2022, condition: as good as new (ex-display), High pressure cleaning unit, high pressure flushing unit, high pressure built-in flushing unit on hot galvanized and painted high quality steel frame with forklift lugs suitable for installation in company vehicles. PTC Salmon similar but no Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60l/min. at 150bar | Engine: Kohler 19kW Salmon 45/200 | 45l/min. at 200bar | Motor: Kohler 19kW Salmon 35/250 | 35l/min. at 250bar | Motor: Kohler 19kW Salmon 30/300 | 30l/min. at 300bar | Motor: Kohler 19kW Kledpfx Adeiky H Sswol DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1.250x1.200 mm. dimensions with 400l water tank LxWxH: ca. 1.220x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 1.670x1.250x1.200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min. - Working pressure: 150 - 300 bar MOTOR: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicators for oil temperature, low lubrication oil pressure, clogged air filter, RPM, alternator and spark plugs - Emergency stop button ELECTRICAL OPERATION: - On / off hydraulic hose reel; - On / Off bypass; - Speed control +/-; - Emergency stop button; - Switching to radio remote control; INSTALLED ALARM: - Low water protection against dry running of the high pressure pump with automatic shutdown function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH PRESSURE HOSE REEL: - Type: electric hose reel - Material: stainless steel - Capacity: max. 80 m ½" u. 80 m 3/8" high pressure hose. - Hose: 80 m ½" high pressure hose (included) - Hose guide: manual LOW PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾" low pressure hose - Hose: 35 m ¾" low pressure hose (included). WATER FILTER: - With washable cartridge and drain valve . - Filtration degree: 50 mesh INCLUDED: - Multifunction radio remote control IMET; - On / Off motor; - On / Off Bypass; - Speed control +/-; - Winding / unwinding hydraulic hose reel; - Emergency stop button; - Battery charger for radio remote control; - 400 or 800 l (with steel frame) polyethylene water tank; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½" high pressure hose; - 50, 60 or 80 m 3/8" high pressure hose with G3/4" connection; ACCESSORIES ON REQUEST: - Kit STORZ for connection to the water hydrant; - Kit UNI 45 ; - Version with 2 HD reels; - Mobile hot water generator 10 kW - 12 VDC; - Kit high pressure spray gun, swivel and quick coupling; - Kit high pressure lance with flat jet nozzle 15° / rotating nozzle; - Kit lance for high flow; - Kit rotary nozzles; - Kit double head nozzles; - Kit water sand lance; - Kit detergent dispenser; - Step cleaner; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Other accessories on request

Year of construction: 2024, condition: new, Machine was installed at the customer’s site but never commissioned, NEW and with full Breton warranty. Breton GENYA Switch – 5-axis CNC bridge saw with integrated vacuum suction system and tilting table. The Breton GENYA Switch is a state-of-the-art 5-axis CNC saw system with a monolithic design for maximum precision, speed, and flexibility in stone processing. It combines automated cutting processes with an integrated vacuum suction system, enabling fully automatic handling and positioning of slabs – ideal for kitchen countertops, architectural pieces, and complex cuts. Highlights: Monoblock construction – no foundation work required, fast commissioning 5 interpolated axes – for complex geometries, angle cuts, and pockets Suction system – automatic repositioning and optimization of cutting sequence without operator intervention Exchange table, parallel set-up during main time Camera and CAD import functions – for efficient nesting and cut optimization Automatic tool changer with 10+2 tool positions -SPINDLE MOTOR ISO40 8000 RPM -Hand wheel -BLADE ALIGNMENT UNIT -VEIN MATCHING – permanent license -Linear, fixed tool magazine ISO 40 with 10+2 tool slots -Saw blade head Ø400 mm with ISO 40 tool holder Kjdpfx Ajwthlnsdwell -Max. saw blade Ø600 mm -AUTOMATIC LUBRICATION SYSTEM FOR GENYA -ISO 40 tool holder for milling cutters and drills -Thickness probe -Camera system -Suction system up to 500 kg -Automatic table changer with tilting table Including installation and training. Machine available at short notice.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler ----- Kjdpfx Aewra Ewodwsll Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Year of construction: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Condition: good (used), Technical specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic folding bearing Conical bending device Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Kljdpfxswchn Uo Adwol Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2007, condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer:Hiller Model: Solid bowl screw centrifuge Type: DP51 Machine No.: H3991 Year of construction: 2007 Maximum permissible: Drum speed 3400 I/min Inner diameter of bowl: approx. 505 mm Reel material: ST52,0 drum wall thickness:13,0 mm Other: steel exchange case with reinforced bottom, Accessories: pump for sludge inlet, flocculant suction pump, flocculant discharge pump Flocculant station: 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer: galvanized steel Klodpfx Adoppucaowsl Total mass: approx. 4200 kg Purchase and rent possible.

Condition: good (used), in total 14 pieces available 3 x SEEPEX Nemo 1 x NETZSCH NM045, GETRIEBEBAU NORD, year: 2001 2 x NETZSCH NM021BY, HANNING 0,75 kW, year: 2014 2 x ALLWEILER SEP 380.1A11P01, year: 1990/1992 2 x ALLWEILER AE1N25-ID, GETRIEBEBAU NORD 0,75 kW, year: 1996 Kodolhr Hfjpfx Adwjll 3 x ALLWEILER AE1E550-ID, GETRIEBEBAU NORD 4 kW, year: 1996 1 x unknown brand, LEROY SOMER gearbox, 5,5 kW

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l Kjdpfsgvqz Ijx Adwell

Year of construction: 2025, condition: new, Standard version with column Motorised height adjustment 700 mm Articulated arm length 2x 1.100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5,5 kW including the following options: + speed control, spindle speed approx. 250 - 1.000 min-1 + pneumatic grinding pressure support + bellows cover for column and trapezoidal spindle Kjdpfxogn Tzlo Adwoll + Incl. foundation screws and mounting template Grinding tools optionally available Request more information

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, fuel: diesel, rotational speed (min.): 1,800 rpm, type of cooling: water, power: 160 kW (217.54 HP), year of last overhaul: 2025, water pressure: 2,400 bar, pump capacity: 35 l/min, Equipment: type plate available, Hammelmann HDP164, 2400 bar, 35 litres Conjet 324 Klsdpfxex Hv N Is Adwsl Numerous accessories included: UHP hose, gun, nozzle, mobile diesel tank, etc. Contact on WhatsApp!

Condition: as good as new (ex-display), mileage: 3,70,000 km, fuel type: diesel, axle configuration: 6x2, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, crane, differential lock, hydraulics, MERCEDES ANTOS 2536 EURO 6 KM 370000 YEAR 2014 FULL OPTIONAL TRUCK MECHANICALLY PREPARED. TRILATERAL TIPPING BODY LENGTH 5.50 M X 2.55 M 60 CM SIDES BONFIGLIOLI 15000 CRANE 4 HYDRAULIC EXTENSIONS SCANRECO RADIO CONTROL. Ksdjvvg Uzopfx Adwjll