Used press brakes with 50-74t bending force for sale (77)

Condition: used, Year of construction: 2005, pressure 300 t chamfer lenght 4550 mm distance between columns 4050 mm Blsdpoz Icy Djfx Af Ajn control CYBELEC DNC 1200 PS total power requirement 33 kW weight of the machine ca. 25.500 kg

Condition: good (used), input voltage: 380 V, type of input current: three-phase, pressing force: 65 t, stroke length: 100 mm, Used hydraulic press brake Brand: Ajial Model: 3100x65tn Bending length: 3100mm Bedpfx Afez Du Dgj Asln Pressing force: 65 tons Stroke: 100mm Motor: 5.5Hp (Three-phase 380V) Up and down movement controlled by a two-foot pedal + emergency stop. Includes: - Ajial 85º punch set, 3000mm - Multi-V die, 54x54mm, 3000mm.

Condition: new, Year of construction: 2026, machine/vehicle number: P786, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, pressing force: 60 t, stroke length: 215 mm, operating speed: 280 mm/s, reverse speed: 170 mm/s, table length: 1,550 mm, throat depth: 255 mm, distance table to ram: 400 mm, clearance between the columns: 1,200 mm, oil tank capacity: 120 l, overall weight: 6,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Small, powerful all-rounder! Also suitable for multi-station operation! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the control cabinet construction, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to bend at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability and efficiency, together with easy operation, allows us to meet the highest requirements and accuracies in the bending process. Press force: 600 kN (60 t) Working length: 1,550 mm Distance between uprights: 1,200 mm Installation height: 400 mm Overhang: 255 mm Ram stroke: 215 mm Lower bed height above floor: 947 mm Rapid traverse max.: 250 mm/s Pressing traverse max.: 9.8 mm/s Retract traverse max.: 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 5.5 kW Hydraulic oil tank capacity: 120 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 7 t Description: Bledpfxez Hnz Dj Af Ajn > Machine body: Steel S 355 N Design based on FEM analysis Side stands with two pressure tubes Floor-standing 2-component structural paint RAL 7004 / 7016 > Hydraulics & upper beam Proportional valve control, electronically monitored cylinder synchronization Press beam stress-relieved annealed, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC, fully hardened Bottom: narrow table, single V (13 × 20) Reinforced lower bed, no mechanical deflection required > Support arms 2 aluminum support arms at the front, approx. 600 mm, with tilting stops Can be moved on ball bearing linear guide Height-adjustable for dies from 55 to 100 mm > Back gauge 2-axis X-axis 950 mm, 300 mm/s, ± 0.01 mm R-axis 200 mm, 150 mm/s, ± 0.01 mm Z-axis manual with quick clamp, 2 stop fingers > Control system: Delem DA 66S 24″ touchscreen on swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety CE-compliant, Pilz safety PLC TFS laser light curtain, moving with the ram Rear light curtain > Control technology Back gauge with AC servo technology Compensation for side stand deflection and temperature-related stand expansion Dynamic press force control, LED work area lighting including lighting behind the machine

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, overall weight: 50,000 kg, working width: 2,500 mm, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Blodpfoyznhljx Af Aen Technical data of the pres brake : Manufacturer: GÉFI Type: LE 50/2500 Year of manufacture: 1983 Pressing force: 50 tons Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: used, Year of construction: 2013, total length: 3,050 mm, total width: 1,650 mm, total height: 2,350 mm, Colour: Grey Weight: 5.690 kg Blodpfjzbhy Tox Af Asn - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7304138524 - Drive system: CNC - Control system brand: Durma - Power [kW]: 7.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 60 - Max. working width [mm]: 2050 - Column gap [mm]: 1720 - Backgauge depth [mm]: 800 - Crowning system: Mechanical - Tools included: Yes - Options: Digital readout - Transport dimensions: 3050mm x 1650mm x 2350mm (l x w x h) - Transport weight [kg]: 5690kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 1979, For 75T working length 2500mm Bjdpfexwxg Iox Af Aeln

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 560 t, stroke length: 500 mm, operating speed: 10 mm/s, reverse speed: 30 mm/s, table width: 1,400 mm, clearance between the columns: 1,260 mm, total length: 2,010 mm, total width: 1,600 mm, total height: 2,200 mm, overall weight: 4,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this very good Boschert Quick-Bend 56 CNC press brake, manufactured in 2018. Manufacturer: Boschert Blsdjy Nbw Ajpfx Af Aen Model: Quick-Bend 56 CNC Year of manufacture: 2018 Condition: very good Category ID: 1466 Type ID: 1717 Machine type: press brake If you have any further questions or need more information, please send us a message or give us a call.

Condition: good (used), Year of construction: 2011, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Bljdpfx Aezpd Etof Aen

Condition: excellent (used), Year of construction: 1989, We are offering this Amada Promecam ITS 50-20 press brake in very good condition, manufactured in 1989. Bledpfozp Siaox Af Aen Manufacturer: Amada Promecam If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2023, pressure 320 t chamfer lenght 6050 mm distance between columns 5100 mm stroke 350 mm dayligth 650 mm total power requirement 30 kW weight of the machine ca. 22.500 kg dimensions of the machine ca. 7000x2300x3200 mm Bledpfxozvq Eae Af Aon

Condition: used, Year of construction: 2019, pressure 60.0 t Bedezlulpopfx Af Ajln chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable 500 mm control DA 66T oil volume 150 ltr. voltage 380 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - ?v=KRifrqTgkVU ----- SPEED BEND PRO CNC press brake: * increased installation height * increased cylinder stroke * and increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen * 2D graphic touchscreen programming mode * 3D representation in simulation and production * 17" color TFT screen with high resolution * Bending sequence calculation * Product programming and representation in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. 500 mm * Travel speed .. 500 mm/s * with 2x manually adjustable stop fingers - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm * Travel speed .. 350 mm/s - AMADA/PROMECAM upper tool holder * including clamping jaws with upper wedge camber * 1x ROLLERI split set 60° upper tool - AMADA/PROMECAM lower tool holder * including 1x die shoe "C 1050-R" * 1x AMADA 1-V die 85° - Safety device at the rear (door including safety switch) - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x freely movable double foot control - CE mark / Declaration of conformity - Operating instructions including circuit and hydraulic diagram

Condition: good (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V500 Year of manufacture: 2006 Only 6,120 “hydraulic operation” hours Technical data Manufacturer: Trumpf Type: TrumaBend V500 Year of manufacture: 2006 Capacity: 50 t Working length: 1250 mm Stroke: 215 mm Distance between uprights: 1040 mm C-frame overhang: 420 mm Installed height: max. 385 mm Working speed: 10 mm/s Return speed: 220 mm/s Voltage: 3 x 400V Rated current: 21.5 A Connected power: 8.6 kVA Compressed air connection: 6 bar Bljdpfoz Ehbhex Af Ajn Dimensions: approx. L 2.20 x W 2.00 x H 2.40 m Weight: 4.9 t Equipment • Trumpf TASC 6000 control system • Pneumatic die shifting • Hydraulic tool clamping, top and bottom, Wila/Trumpf • Controlled axes: Y1, Y2, X, R • 4 adjustable backstops • Electric roller curtain as rear guard • Bend-Guard safety light curtain at the front • Tool package: - Upper tool, straight, R1, H 195mm, L = 1.250mm, segmented - Lower tool EV003, W10/30°, H 100mm, L = 1.250mm, segmented All information is subject to change without notice. A live demonstration can be arranged at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,763 h, pressing force: 61 t, total width: 1,580 mm, total height: 2,545 mm, overall weight: 5,400 kg, product length (max.): 2,100 mm, number of axes: 7, This 7-axis Baykal APHS 21060 press brake was manufactured in 2021. It features a pressing force of 60 tons and a bending length of 2100 mm, providing robust performance for various applications. The machine includes a throat depth of 410 mm and a stroke of ram measuring 210 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 21060 press brake we have for sale. Contact us for further details. • Performance and capacity: • Distance between columns: 1600 mm • Throat depth: 410 mm • Daylight opening: 475 mm • Stroke of ram: 210 mm • Table width: 60 mm • X-axis travel: 1000 mm • Backgauge axis: Y1, Y2, X, R, Z1, Z2 + crawling Blodpfx Aozdktmof Ajn • Hydraulics and drive: • Hydraulic pressure: 265 bar • Oil capacity: 140 liters • Main motor power: 10.3 kW • Installed power: 11 kW • Power supply: 400 V / 50 Hz / 3 Ph • Other: • Maximum stopping time: 80 ms Additional equipment • Upper tool, 57 kg • Lower tool, 87 kg Technical Specification Bending Length 2100 mm

Condition: used, Year of construction: 2001, total length: 3,600 mm, total width: 2,000 mm, total height: 2,800 mm, Colour: Red Weight: 5.500 kg Price: On request - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: HFE50-20LV010254 - Drive system: CNC - Control system brand: Amada - Control system type: Operateur 2 CNC - Power [kW]: 6.0 - Number of axes [pcs]: 8: Y1+Y2+X1+X2+R1+R2+Z1+Z2 - Press force [ton]: 50 - Max. working width [mm]: 2090 Bodpozwvrzsfx Af Aeln - Column gap [mm]: 1665 - Throat depth [mm]: 400 - Max. stroke [mm]: 350 - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3600mm x 2000mm x 2800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2008, pressure 56.0 t chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min return speed 35.0 mm/sec Control CNC Boschert back stop - adjustable 0 - 370 mm work height max. 915 mm Bsdpszy Sdxsfx Af Aoln Cylinders : 2 Stück voltage 3x 400 V connected load 8.0 kVA weight 3700 kg very good / well-maintained condition (!!) with lots of bending tools - in checked conditions - machine video - ?v=NrpZs6Ar0Vo Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Condition: excellent (used), Year of construction: 2009, operating hours: 8,100 h, AMADA PROMECAM MODEL HFE 5020 50 TONS CAPACITY X 2000 year 2009 specification 7 AXIS CNC HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 Bledpfx Aszn Afvof Ajn MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V090090 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2009 price POA specification

Condition: used, Year of construction: 1984, Technical details: pressure: 50 t chamfer lenght: 2550 mm distance between columns: 2045 mm throat: 250 mm stroke: max. 170 mm Bodeu Ib D Eopfx Af Ajln back gauge - adjustable: ca./approx. 800 mm control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a control malfunction ( DELEM) and will be sold as is! i.D. *

Condition: excellent (used), Year of construction: 1993, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 4 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1993 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 4 Blsdpfxspygyds Af Aon AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 1998, Used 2500 mm bending machine by Safan Bledpszvyg Hefx Af Asn Type: SMK 50 2550 TS1 Capacity: 2550 x 50 tons TS1 CNC control Y1, Y2, X, R, Z1 and Z2 Year of manufacture: 1998

Condition: used, Year of construction: 1964, total length: 2,100 mm, total width: 1,500 mm, total height: 1,850 mm, Colour: Green Weight: 2.500 kg - Year: 1964 - Documentation available: No - CE certificate present: No Blsdpfx Afozc Irro Aon - Serial number: 13120 - Drive system: Conventional - Number of axes [pcs]: 1: Y1 - Press force [ton]: 50 - Max. working width [mm]: 2000 - Backgauge depth [mm]: 0 - Punch holder: Fixed - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 2100mm x 1500mm x 1850mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Bljdpfx Aop R Ircjf Aen Press force: 600 kN Weight: 4000 kg Power: 10 KW

Condition: ready for operation (used), Year of construction: 2024, pressing force: 64 t, CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details. • Inspection possible: Yes, in Bulgaria • CNC control • Control system: E-Touch ET18 (E-Touch 18) • Programming: 2D graphical programming, CAD import, offline programming • Remote assistance: Yes • Automatic bending-process calculation: Yes • CNC axes: 4+1 (Y1, Y2, X, R + V motorized crowning) • Main technical specifications • Distance between columns: 1,980 mm • Throat depth: 300 mm • Ram stroke: 160 mm • Maximum open height: 370 mm • Repositioning accuracy: ±0.05 mm • Fast approach speed: 200 mm/s • Bending speed: 10 mm/s Bjdjzu Swnepfx Af Aoln • Return speed: 180 mm/s • Main motor power: 7.5 kW • Axes / backgauge • Y1/Y2: Fully synchronized • X-axis: CNC controlled • R-axis: CNC controlled • V-axis: CNC motorized crowning • Backgauge: Servo controlled • Main components • Hydraulic system: Bosch Rexroth • Main motor: Siemens • Electrical components: Schneider Electric • Ball screws / linear guides: HIWIN • Linear scales: GIVI (Italy) • Tubing / connectors: EMB (Germany) • Sealing rings: NOK (Japan) • Hydraulic pump: Sunny (USA) • Safety and compliance • Motor overload protection • Electrical leakage protection • CE safety standard Additional equipment • 1 set upper punch (heat-treated 42CrMo) • 1 multi-V lower die (heat-treated 42CrMo) • Quick-release upper tool clamps • 2 front support arms • Foot pedal with emergency stop • Safety fence Technical Specification Bending Length 2500 mm

Condition: like new (used), - Capacity: 1600 x 50 tons - NC control (touchscreen) - 2 hydraulic cylinders - Foot pedal operation - Light curtain safety system - Emergency stop Bljdpfjzfv Ufox Af Ajn - Lighting - Documentation - 400V

Condition: ready for operation (used), Year of construction: 2004, pressure 50.0 t chamfer lenght 1275 mm distance between columns 1040 mm column arm 250 mm ram stroke speed 225 mm/sec work speed 0 - 9.8 mm/sec return speed 160 mm/sec work stroke 215 mm dayligth 512 mm table height 800 mm back stop - adjustable 600 mm control DELEM DM 51 operating pressure max. 300 bar oil volume 150 ltr. voltage 400 V engine output 6.0 kW Weight 4300 kg range L-W-H 1930 x 1510 x 2390 mm Blodpfexab U Hjx Af Ajn current new price approx. 80.000 euros special price on request good / well-maintained condition (!!) - in checked condition - machine video - ?v=5L8L2AYv0PU ----- PLACKE electro-hydraulic CNC press brake specially developed for the production of small parts The advantages: • Low energy consumption • High operating comfort • Wide range of applications • Fast, robust, low-noise • With CNC control as standard ----- Equipment: - CNC electro-hydraulic press brake with 1x working cylinder - DELEM CNC control model "DM 51" - CNC controlled axis: Y1 - Y2 - X - CNC electro-motorized back stop * Travel path: X = max. 600 mm * Travel speed X axis .. max. 300 mm/s * Positioning accuracy .. +/- 0.02 mm * with 2x manually adjustable stop fingers (R+Z axis) - WILA standard - manual upper tool clamping - WILA standard - manual lower tool clamping - PLACKE safety device at the front: light barrier - side protective device (swivel doors) - rear protective device (swivel + lockable door) - front storage area - side sorting system for bending tools - 1x freely movable foot control - original operating instructions including circuit and hydraulic diagram

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Tonnage 50 tonnes Max. Bend Length 1250 mm Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Blodpeyym Hkofx Af Aon Oil Capacity 55L Motor Power 6KW Weight 2550 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 2000 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Beam width 60 mm Table height 960 mm Open Height 370 mm Throat Depth 100 mm