High pressure and suction device 160bar 55l/min.

PTC Vortex Combi

Condition: like new (used), Year of construction: 2018, Dynajet 500th Pressure Washer Gedpfx Asyigr Usnxeub Year of manufacture: 2018 Max. temperature range: 95°C Brand: Dynajet Mobile: yes Serial number: 62005720 Type: 500th Maximum working pressure: 500 bar With remote control; water tank 1000 l; unladen weight 1420 kg; approx. 30 m high-pressure hose; approx. 25 m filling hose; operating hours: 597 hours; tested and fully functional

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Table diameter 1200 mm Inclination 0-120° Total height 700 mm Gujdpedvn E Uefx Anxeb Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Horizontal disc mass 1200mm up to 1900mm

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Godpfxsw Uf Ihs Anxsub Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: excellent (used), Year of construction: 2006, Technical Data: Working width: 2100 mm Bending capacity: 28.0 mm Pre-bending: 22.0 mm CNC control Top roller diameter: 350 mm Middle roller diameter: 330 mm Side roller diameter: 240 mm Gujdpox Dtt Aofx Anxeb Hardened rollers Conical bending device via tilt adjustment of both side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (L x W x H): approx. 3600 x 1500 x 1500 mm Weight: approx. 4.5 t The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technical condition, and wear conform to its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2025, Engine power 7,5kW - Cutting force 30to Gjdpfx Anegl Adzsxsub Cutting channel designed for - max. roll length 1500mm - max. roll diameter 850mm - machine weight approx. 3500kg - tank capacity approx.110liter - hand guard in the area of the control panel and opposite to it -knife lock -splitter table straight execution -documentation 2-fold German ( 1x text form, 1x CD ) -color RAL 5012 - light blue protective grid/knife bar RAL 1028 melon yellow machine in stock and immediately available Price and further info on request

Condition: used, mileage: 1,56,700 km, power: 265 kW (360.30 HP), first registration: 12/2005, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2023, color: orange, gearing type: semi-automatic, emission class: euro3, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2005, Equipment: ABS, air conditioning, ++ FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ Mercedes Actros 2536 L 6x2 Wiedemann enviro tec, Super 2000 6.0/5.0, Water Recovery Unit Body * Wiedemann enviro tec * Super 2000 6.0/5.0, with water recycling * 11,000 litre tank capacity * 1,000 litre fresh water tank * 5,000 litre flushing water tank * 6,000 litre sludge volume * Emptying via 45° tiltable tank Vacuum System * Wiedemann & Reichhardt KW 2000 * Approx. 2,000 m³/h Gedpfjxa T Rtsx Anxeub * Approx. 25m suction hose DN 125 * Suction pipe DN125 with sewer folding cover High-Pressure System * URACA KD 716 G65 approx. 340 l/min at 175 bar * Approx. 180m HD hose DN25 * Hydraulic high-pressure hose reel with approx. 60m DN 13 Additional Freshwater System * Speck NP 25/50-120 delivering 50 l/min at 120 bar * Spring-loaded hose reel with 15m pressure hose DN10 Special Features * Sludge tank made of material 1.4301 (stainless steel) * Suction and high-pressure booms * 5 litre hand washing unit with hot water * Stainless steel toolbox * Control cabinet without display * Engine start can be activated from the control cabinet * NMV start can be activated from the control cabinet * Radio remote control with display * Equipment cabinet with two flaps – on both sides * Hose storage compartment * Extended sound insulation for the pump compartment * Work lights * Central lubrication system Technical Data * Unladen weight: 16,920 kg * Gross vehicle weight: 26,000 kg * Length: 11,400 mm * Height: 3,600 mm * Width: 2,550 mm Special Equipment: Engine tunnel storage, front axle load 9.0 t, audio system: Radio Truckline CD 65 / 70 incl. CD player, exhaust raised behind cab, battery 220 Ah, hands-free telephone system, rear axle H 7, 13 t, crown wheel 300, comfort central locking, fuel tank: 400 litres aluminium, reinforced cooling, additional air compressor, PTO independent of gearbox, MB 2C PTO, programmable special module, rotating beacon left/right, reverse warning signal (external), electric sliding/tilting glass sunroof, cab seats: co-driver comfort air-sprung seat, cab seats: driver comfort air-sprung seat, sun visor, voltage converter 24V / 12V 15A, 12V socket, Telligent steered trailing axle, front underrun protection, gearbox oil cooler Other Equipment: Euro 3 emissions standard, axle configuration: 6x2, 2-line trailer brake, electrically adjustable and heated exterior mirrors, outside temperature display, rear axle differential lock, cab: suspension for rough terrain (6.0 HZ), cab: M (medium length), suspension: leaf/air, generator 80A, 16-speed gearbox, cabin filter: pollen filter, chassis/body: chassis, engine 12.0 litre – 265 kW V6 diesel (OM 501 LA), engine brake with constant throttle, single tyres on trailing axle, disc brakes, Telligent brake system with ABS+ASR, CB radio pre-installation, pre-installation telephone/fax, dropped front axle, immobiliser, heat insulating glazing, central locking with key For further detailed information and/or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and specifications of the equipment. Sale is exclusively subject to our terms and conditions and with exclusion of any warranty.

Condition: as good as new (ex-display), Year of construction: 2023, Container turning device 10 tons load capacity Speed infinitely variable Hand and foot remote control Diameter from 320mm to 2800mm Roller diameter 300mm speed 6 - 60 m./h Gusdpsd Nmx Tefx Anxjb power 2 x 0,55 KW

Condition: new, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: semi-automatic, Year of construction: 2025, Equipment: ABS, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #546 Mercedes-Benz Actros 2546 BL 6x2 with Kroll ADR Vacuum/Pressure Tanker K 1.0-13.5 /36PESP Brand new KROLL ADR vacuum/pressure tanker mounted on Mercedes-Benz Actros – built for the toughest jobs from day one. Maximum suction power, powerful high-pressure system, and premium ADR-L4BH technology make this vehicle an excellent choice for professional waste disposal contractors and industrial operations. Body • Manufacturer: KROLL • Tank material: S355J2+N (St 52.3) • ADR vacuum/pressure tank K 1.0–13.5 / 36PESP • Tank capacity, air: approx. 13,500 l • Sludge volume: approx. 11,200 l • Emulsion chamber: max. 4,589 l • Rinse water (non-pressurized): approx. 1,000 l • Discharge via telescopic piston Chassis • Mercedes-Benz Actros 2546 L 6×2 • PowerShift 3 automatic gearbox • 460 HP / 338 kW • EURO 6e • Diesel tank: 400 l • Cab color: Arctic White • 2× LED beacons on cab • Rear-view camera • Navigation • Air conditioning Gjdpfx Aov Nu Sbenxsub Vacuum System • CVS VacuStar W1300 – approx. 1,200 m³/h at 400 mbar • Suction hose reel for approx. 50 m DN75 (tank lid, pass-through into tank) • incl. 30 m plastic suction hose DN75 High-Pressure System • Speck P45/85-160 • Output: 85 l/min at 160 bar • Small hydraulic HP hose reel for approx. 60 m DN13, hydraulic • incl. 60 m rubber HP hose DN13, hydraulic Special Features • ADR version L4BH (incl. EX/II, EX/III, AT) • Upper suction connection DN100, remote controlled • Manhole DN500 on tank crown, with access and working platform • HP gun • Soundproofing panels left & right in front of the pumps • LED work area lighting • Radio remote control • Tiltable scrap box • Ladder with holder & anchorage points • Advertising panels left & right on the tank Summary An extremely robust, fully ADR-approved KROLL vacuum/pressure tanker on Mercedes-Benz Actros chassis – with powerful W1300 vacuum system, efficient HP pump unit, and complete safety and comfort features. Ready for immediate use in industrial, waste management, sewer services, and hazardous goods transportation. For more detailed information and/or photos, please contact us directly. You can find a wide selection of other vehicles for purchase or rental at: Specifications subject to change, prior sale and errors reserved. Buyer is obliged to independently inspect and verify the condition and equipment of the goods. Sale exclusively in accordance with our terms & conditions and without any warranty.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Guedpfx Aehf Na Ssnxob Drive motor power: 11,2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Standard accessories included.

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar Gjdpfogcbzcsx Anxoub - Flow rate: 12 l/min. - motor: electric 4-pole 230V 2,2kW, 1400 1-min - dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START device - Handle with holders for mains cable and high pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm Ø) for easy movement on steps and over uneven terrain - Pressure gauge - Built-in professional relief valve - Delayed TotalStopp - Pulsating system - Rotary switch - Thermal motor protection - Stainless steel manual hose reel with 30 m of 1/4" HD hose - 2 pieces 1/4" F pipe cleaning nozzles - Gun with wash lance and flat spray nozzle The CJ-1E is a mobile high pressure washer ideal for cleaning and unclogging pipes 30 to 120 mm. Equipped with a 2.2 kW and 230V electric motor, it can be used in apartments, houses or commercial spaces for sinks and toilets, as well as garden and general cleaning. The Comet LW-K pump with Easy-Start and pulsation function guarantees extreme reliability and high cleaning performance.