Used fineblanking presses for sale (10)

Condition: used, Year of construction: 1989, Erfurt press with 160-ton capacity, currently disconnected and drained, ready for transport. Godpfx Aexyp Axsgfjir

Condition: used, Year of construction: 1980, Arisa press with 40-ton pressing force Godpeyyq H Uofx Agfoir

Condition: good (used), I sell Fein MSfv 649 Angle grinder with long neck. In bdb condition Godpouhm I Hsfx Agfoir

Condition: ready for operation (used), Year of construction: 1986, machine/vehicle number: 97862034, functionality: limited functionality, pressing force: 100 t, stroke length: 50 mm, working width: 180 mm, installation height: 255 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Press force: 100 t Total force: 1,000 kN Ring tooth force: 40 - 310 kN Counterholder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Stroke rate (min.): 20 rpm Stroke rate (max.): 80 rpm Stroke: 50 mm Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Max. feed height adjustment: +40 mm Max. distance between feed rollers: 20 mm Resolution, related to rollers: 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 EQUIPMENT Decoiler unit Two sets of tools Giedpfxsytcd Rs Agfsr Note: Further technical data for the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-off cycle. As a result, parts were not cleared out and the machine was stopped for safety reasons. However, the seller assumes this is merely a matter of adjustment. The seller recommends an overhaul of the control system in the long term.

Condition: used, Year of construction: 1999, Press force 250 tons, currently disconnected and ready for transport, table 1.5 x 1 m, in good condition. Gsdpfswvbilex Agfjir

Condition: used, Year of construction: 1988, Technical details: pressure: 630 t plate thickness: 16 mm Total force (nominal): 630 to stroke: 30 - 150 mm knife-edged ring capacity: 320 t Nominal force: 160 t : 910 x 1050 mm : 900 x 900 mm dayligth: 410 mm ram adjustment: 120 mm plate width: 40 - 450 mm plate thickness: 0,5 - 16 mm : 1 - 1000 mm total power requirement: 100 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 4.50x2.20x2.80 m Press Feintool + feeding unit * Gisdpfxovmht Ho Agfjr

Condition: used, Year of construction: 1996, machine/vehicle number: 7/4986, Capacity: 250 - 400 ton V – Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg Gijdpfouqdxiex Agfsr Standard configuration Automation roll-off try with leveller

Condition: used, Year of construction: 2001, machine/vehicle number: 01/2437, Capacity: 250 ton V – Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg Standard configuration Giedpfx Agsu U Nimofor Automation roll-off try with leveller

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm Gedpfjvwgl Njx Agfoir lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: like new (used), Year of construction: 1989, machine/vehicle number: 892161, functionality: fully functional, operating hours: 810 h, pressing force: 160 t, total width: 2,425 mm, total height: 2,860 mm, overall weight: 9,000 kg, ram adjustment: 61 mm, sheet thickness (max.): 6 mm, Here you have the unique opportunity to purchase a Feintool GKP F 160 that has seen barely any use. The machine has only 810 operating hours. As you can see from the photos, the machine is in excellent condition. We acquired the press in 2019, but, just like the previous owner, never put it into operation. The machine was test run without tooling at our facility and is fully functional. An on-site inspection under power is possible by arrangement. Technical specifications of the FEINTOOL GKP F 160 fineblanking press: - Maximum sheet thickness: 6 mm - Maximum sheet width: 210 mm - Total force including auxiliary functions: 160 t - Shearing force: 100 t - Hydraulic counterforce (upper bolster): 1–40 t - Hydraulic force of the ring blank holder (lower bolster): 12–50 t - Ejector force (pump pressure): 4–8 t - Hydraulic shearing force: 7.5 t - Pneumatic shearing force: 6.6 t - Slide stroke: 61 mm - Maximum number of strokes: 72/min - Minimum number of strokes: 18/min - Motor power: 11 kW - Pump capacity: 4 kW Gisdpfx Aoumigqsgfer - Air supply: 6 bar - Dimensions (L x W x H): 2380 x 1870 x 2860 mm - Weight of machine GKP F 160: 9000 kg