Tent hall / thermal hall

Röder HTS Höcker Zelthalle 12 m x 50 m

Condition: used, Working width 630 mm Working height 220 mm Feed speed 7/9/14/18 m/min. Knife CentroFix Z4 Dkedex U Dvfspfx Afuei

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels Djdjcggy Sepfx Afueki - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: new, functionality: fully functional, power: 18.2 kW (24.75 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 44 l, color: yellow, overall weight: 3,642 kg, tire size: Rubberen rupsbanden — 300 mm, tire condition: 100 %, number of seats: 1, emission class: euro5, shovel volume: 0.11 m³, Year of construction: 2022, operating hours: 14 h, Equipment: UVV, additional headlights, adjustable boom, cabin, gripper hydraulics, low noise, parking heater, rubber tracks, soot filter, standard shovel, === MAIN SPECIFICATIONS === Year: 2022 Operating hours: 14 h Operating weight: 3,642 kg Transport weight: approx. 3,643 kg Max. digging depth: 3,507 mm Digging radius: 5,563 mm Bucket capacity: 0.11 m³ Engine manufacturer: Yanmar 3TNV88F Engine power: 18.2 kW (Stage V) Drive: Diesel Type: Zero Tail crawler excavator Quick coupler: Easy Lock preparation (AUX IV) Hydraulic functions: Up to 5 auxiliary circuits (AUX I–V) Cabin: Enclosed (standard) Heated cabin: Yes Air conditioning: Optional Travel speed: Auto 2-speed up to 4.7 km/h Tracks: Rubber tracks (300 mm) Stabilizers: No Long dipperstick: Yes Counterweight: Yes Overload system Advanced: Yes Grapple function (AUX V): Yes Emission class: Stage V CE certification: Yes === HIGHLIGHTS === • Factory-equipped Yanmar Stage V engine – high reliability and low emissions • Zero Tail design for tight and urban job sites • Fully hydraulic joystick control with proportional AUX functions • Up to 5 auxiliary circuits – including grapple and Easy Lock • VDS option for improved stability on uneven ground • Ready for immediate operation with complete CE documentation === CONDITION === Excellent condition – only 14 operating hours. Fully serviced, inspected, and tested. Inspection possible on request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide shipping available. Dkodexwlm Uopfx Afuji Price on request (EXW / excl. VAT). Compact, powerful and reliable 3.5-ton Zero Tail excavator with full maintenance records. Part of one of the largest construction fleets in Europe. Delivered CE-approved and immediately work-ready. === DELIVERY === Crane loading available upon request. Flexible international transport options available. All logistics handled by Collé Rental & Sales.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Multivac R-245 Thermoformer year of construction 2011 built in vacuum pump. Foil wide 422 mm. 2x tools Djdpfxexcpfrs Afujki 1x 2 splitted 380 x 300 mm x 380 x 182 mm Max Deep 145 mm. 1x 6 Splitted 240 x 115 mm Max deep 145 mm.

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Dkjdpfjv T D D Ujx Afuoi Type: FW3410/B Year of construction: 2011 Zodiac HC terminal printer 200 V, 3 Ph, 50/60 Hz, 30 A Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch Dodpfx Aowu D Unefuoki • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.

Condition: new, Year of construction: 2026, - Capacity 1.2 mm - Extension 250 mm - With 8 sets of rollers Dedegg Nrkepfx Afuski

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables Djdpfx Aomt Hhwofuski no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: like new (used), Through feed double end trimmer saws. 2x 3kW saw motors. Feed motor with variator. 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar. Dkjdpfx Aeif N Sxofuoi

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X, Y, Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! MACHINE AVAILABLE ON STOCK! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1450 kg Machine dimensions 2680 x 3600 x 2200mm Table height 715mm Vacuum pump 7.5kW Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives WARNING! The machine is equipped with the function of remembering the last G-code track. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h The highest class safety barriers: Optional top-quality light barriers available. The safety zone determined by the sensors does not allow you to enter the machine's working area. A set of barriers ensures the safety of the operator. Z-axis gate height up to 450 mm UCANCAM V11 software (possibility to import files from Corel, Autocad). File import/export, editor and insertion of these text. Tool set: cutters, drills, holders. *Unloading and placing the machine on the customer's side. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis by 350 mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP control - digital data processing The machine is equipped with the function of remembering the last G-code path - in the event of a failure or power interruption, it starts working from the last point without losing time and material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. Dkodog Ngixspfx Afuei