Cutting mill 37 kW with blade set NEW

RAPID 650-M

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm Lodpevc Ax Njfx Ag Aohk passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Year of construction: 2009, condition: used, Mepac heavy duty vertical bagging machine for bulk productions. Lhsdoxt Ib Hjpfx Ag Aek

Condition: good (used), Sanding machine for straight edges; for sanding and fine polishing straight edges, miters and phases Data: - Glass thickness 3-25 mm - Min. dimensions: 80 x 120 mm - Max. Dimensions: 3 x 3 meters - Mitres 0-60° - Power: 15kW - Dimensions: Length 6.5 meters Ledpfxeu U H H Ae Ag Aohk - Width with water tray 1.6 meters - Height 2.5 m meter - Feed speed: 0.4 - 4.2 m/min. - Weight: 2600 kg Price on request

Condition: reconditioned (used), power: 30 kW (40.79 HP), hopper volume: 800 l, working width: 800 mm, Slow-speed shredder, 800 x 1000 mm hopper, 30 kW motor, hydraulic pusher, reversible knives Lhsdpfxswzg Tae Ag Ajk

Condition: used, Year of construction: 1986, functionality: fully functional, Dry-ball mill – including new electric motor Ledpfxoxixiyj Ag Ashk

Condition: used, Year of construction: 2007, Used Golfetto Sangatie Stone Catcher Multiple units available Drive 2x 3kW Used for destoning wheat Measurements in attached file Gravity Selector Dryostoner Lhsdpexft Ddjfx Ag Aek

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Lsdpfxeucw S Sj Ag Aohk

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Ljdjw Ad Rrjpfx Ag Ajhk Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Lhsdpfxsua Tbws Ag Aek Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: Lhjdpsq I Nxdjfx Ag Aok - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable