Powder oven

ROMER Curing Oven SL Series

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Credpsfz U Nbsfx Aa Neb 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Codeyrirropfx Aa Nerb Spindle speed 10,000 rpm Tool magazine for 30 tools, SK 40

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Crjdpsfy T Spefx Aa Neb 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Cedpfx Aajfx Nfms Njrb Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Cjdsqakbropfx Aa Nsrb Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Crjdpfx Aaepugwio Nsb The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: NOH366, ABUS ELV Crane Skyline Crane Runway Bridge Crane Hall Crane Crane Codpfx Aaoxtyvpo Nsrb There are 3 identical cranes available! Load capacity / Lifting capacity: 5t - 5000KG Span: 14,260mm, external dimension approx. 14,500mm Year of manufacture: 2003, with radio remote control and pendant control as backup Lifting height: 6m Overall height (top of crane to hook): approx. 900mm End carriage length with buffer: approx. 280cm Further data to follow Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight carrier possible, please enquire with postcode Collection preferred

Condition: new, Year of construction: 2024, This is a CNC router that has 4 spindles operating simultaneously and can change automatically! That increases the effectiveness of the production, making it 4 times faster. That CNC milling machine is perfect for big production of facades, doors, windows, casing moldings, etc. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 S4 machine characteristics: Crjdpor D Ntfefx Aa Neb Working area: 1300x2500 mm Spindle: 6 kW Machine size: 2000 x 3040 x 1780 mm Weight: 1000 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm Cedpfx Aaen E N Nds Njrb feeding length: up to 270 mm output: up to 350/min

Condition: good (used), Opportunity: 2x Pfeiffer Classic 590 available! Price: EUR 99.500/piece. Configuration Coater 1: 2x Pfeiffer TPH 2301 (2300ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Cjdpshwv Tfofx Aa Nerb Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Currently used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc) Configuration Coater 2: 2x Pfeiffer TPH 2201 s p c (horizontal turbo 2200ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Current used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc)