ProfiCenter (CP02)

ROMER-profesjonalne centrum proszkowe CP-02

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes Nedpfofz U Rcex Ac Aswd • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. The machine is used and is sold without warranty. Inspection is possible and welcome. Nwjdpev Radxjfx Ac Aod Loading facilities available.

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel Nedpfx Acjfz Dkns Aowd • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air Njdpfx Acjfz U Rrj Ajwd • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: excellent (used), Year of construction: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of production: 2008 A gravimetric dosing and mixing unit designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. The actual, measured and weighed quantities are constantly compared with the set values using a modern microprocessor-based control system, which guarantees very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: 2 feed tanks for primary material or regranulate/primary material 2 feed tanks for masterbatches or additives 2 pneumatically controlled conical dosing heads 2 precision dosing screws with motor drive Material tanks – capacity approx. 7 litres Weighing tank – capacity approx. 0.8 litres Mixing tank – capacity approx. 3.0 litres Manually operated gate valve GRAVInet controller with colour touch panel for recipe, milled material and process data management, vibration compensation and continuous self-optimisation; built-in Ethernet port and standard reporting/printing functions Njdpswm Ii Tsfx Ac Aowd Technical data: Average capacity: 60 kg/h Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Compressed air: 6–8 bar, without oil and water Weight: approx. 60 kg ✅ The set includes Piovan material feeders - visible in the photos.

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Nwsdpefz U Sasfx Ac Aod Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes Nwjdofz U Swepfx Ac Aed • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: new, Year of construction: 2025, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Nwedpfx Aeulwg Njc Aed Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Condition: excellent (used), machine/vehicle number: 98 0044 10, WITH CUTTING DEVICE Nsdjvf Iv Sspfx Ac Aowd

Condition: new, Year of construction: 2025, Pneumatic radial riveting machine RMU-12-C is designed for forming caps in solid steel rivets d=2...12 mm and in tubular steel rivets d=4x1...14x1 mm. This riveting machine can be used for movable and immovable riveted connections. Technical data: 1. Diameter of solid steel rivets - 2...12 mm. 2. Diameter of tubular steel rivets - 4...14 mm. 3. Motion of riveting head - 20 mm. Nwedpfx Aofvztusc Aed 4. Time of unriveting for one rivet - 1...10 sec. 5. Motor power - 0,75 kW. 6. Voltage - 220/380 V 50 Hz. 7. Working pressure - 3...6 Bar. 8. Weight - 100...120 kg.