Water temperature controller

Rummel Kunststofftechnik GmbH TEMP 90 W9 SSR - DM

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Fodpjg Ey Rfofx Ah Dopr medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm Fsdpfjg U Uv Rjx Ah Dspr 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Fodpodmn E Hofx Ah Dspr

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display Fpedpfx Asftm Hrsh Der - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: MA0139_1335, Exhibit immediately available: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and 315 liters compressed air tank Control Sigma Control 2 Fedpohwwyrefx Ah Dopr Year: 2024 Operating hours: 1 hr Pressure: 8 bars Rated power: 11KW Delivery quantity: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Compressed air tank: 350 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 750 x 1335 x 1880 mm Weight: 579 kg Visit our store. We always have a wide range of new and used compressors in stock!

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return Fpsdpfx Aefnvwqoh Dor - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks! Fjdpfxeddv Its Ah Dspr

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Fpjdjg Ey T Ejpfx Ah Djr Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Technical details: revolution per minute: Motor: 1430 U/min voltage: 380 V / Hz weight: 125 / Gerät kg dimensions: L:680 x B:850 x H:750 mm 2 pieces RADAX high pressure tube fan for dusty air mixture 3-Ph; IE3 06717 external control motor ADDA drive technology, IP55 Ø of the ventlator 650mm 2x flange with 16 holes -hole circle Ø 700mm Fpedpfou Nww Dex Ah Dsr *

Year of construction: 2025, condition: new, From manufacturer very good quality heat control unit (Thermoregulator) for sale. Technical data: Brand: Churchill ISI-TAN Model: CH18 Heating Capacity: 9kW (oil or water) Cooling: 90C/40 kW Operation Range: 0-90C (water), 0-150C (Oil) Pump: 60l/min (German brand) Power Consumption: 10 kW Voltage: 400/50Hz, 3phases Fpedpfx Aegnlf Heh Djr VAT and delivery cost is not included