Mobile Concrete block making machine

S.C. Arghir Prodex S.R.L. FORTE MAXIMUS

Condition: ready for operation (used), For sale: conveyor belt as seen in the photos, approximately 7.5 m long. Belt width 0.3 m. Possibility of transport. Godper Nvx Uefx Abhjip

Condition: new, Year of construction: 2024, 1x available for delivery in 2024, price €58,000 2x in stock 2024 Engine: KUBOTA V2403-CR-T-EW03, 4-cylinder, Euro 5 engine. Multipurpose / loading bucket 4:1, 0.35 m³, 1615 mm wide, quick coupler system, hammer circuit, immobilizer, ROPS-FOPS cab with air conditioning and heating, radio CD/MP3 player, pre-cleaner Top Air, acoustic reverse alarm, LCD information display, monolithic rear window, foldable side window, ergonomic joystick controls, interior lighting, 12-volt socket, personal storage spaces, luxury driver’s air-suspension seat with heating, rotating beacon. Gedpfxsxthxrj Abhjip Warranty: 1 year or 1,000 operating hours. HMK 62SS – Turbo diesel engine KUBOTA Stage V. Standard backhoe loader bucket 0.063 m³, 420 mm width. Robust structure. New-generation ROPS/FOPS-certified cab. Operating weight incl. 3,600 kg – 5,300 kg. Hydrostatic drive, two hydraulic motors per side. Hydraulic gear pump, 23 cm³/rev. Bridgestone K9 rubber tracks. Loader. Mechanical quick coupler. Tires 10x16.5 (10 PR). 4x1 multipurpose bucket, 0.35 m³. Self-leveling bucket/fork kinematics for lifting and lowering. Hydraulic joysticks on curved (banana-style) boom. Hydraulic telescopic arm. Safety valves on stabilizers. 62 SS standard loader 4:1 bucket 0.35 m³, 1630 mm wide. 62 T standard loader 4:1 bucket 0.45 m³, 2085 mm. LCD control panel. Heating. Air conditioning. Luxury driver’s seat with armrests, headrest, safety belt. MP3 audio system with antenna and speakers. Front and rear windshield wipers. Two adjustable road lights (2 front, 2 rear) with intermittent work lights (2 front, 2 rear – independently adjustable). Rotating beacon. Emergency stop switch and battery disconnect switch. Reverse alarm. High-capacity battery, three-stage. Warranty: 1 year or 1,000 hours, whichever occurs first. Valid within the EU or subject to confirmation depending on country of use. Documentation: user manual, spare parts catalog, manufacturer.

Year of construction: 1993, condition: ready for operation (used), Includes aggregate weigher, cement weigher, water weigher, additive weigher, special material weigher, Schlossermixer and Biotronik control system, documentation available, on-site inspection is possible. Gisdpfxeq Ttz To Abhep

Condition: new, Year of construction: 2024, Price 99000¤ + VAT HMK 102 B Alpha Stage 5, turbo diesel engine 99.8 HP (74.4 kW, 4.4 liters, 4 cylinders Perkins, Road registration possible Luxury glass cabin "Jumbo" of the latest generation, FOPS/ROPS certified with 2 doors Air conditioning and heating CD-MP3 audio device with antenna and speakers Music player ? Bluetooth Street lighting ? 2 front, 2 rear, with flashing light Work lights ? 4 front, 4 rear, independently adjustable Beacon ==> LED reversing alarm Manual mode to activate the gearbox in the event of electronic system failure Tool box, work suit Documentation: user manual, spare parts catalog Servo-assisted, double pedal together or separately, including hydraulic accumulator for effortless braking in engine off Luxurious driver's seat with armrests, headrest, adjustable to the driver's position and weight and seat belt Tilt-mounted steering column TIPshift joystick for front loader 6 forward gears, 3 reverse gears, full automatic/Powershift Two adjustable and tilting panoramic mirrors Windscreen wipers front and rearAutomatic transmission 6 forward gears/3 reverse gears, full Powershift/Autoshift Heavy-duty axles 100% differential lock (rear axle) + limited-slip differential (front axle) Flow-sharing system (enables combined movements)Closed, load-dependent flow-sharing hydraulic system Integrated four-wheel drive (4x4)Front tire 20"Rear tire 16.9-28 12-plyTelescopic arm + Brake line BRAKE LINE VALVE/TELESCOPIC Brake line Double acting hydraulic line MSS (Motion Stabilization System)Auto-locking systemHydraulic joysticks Load control valve (REXROTH-LS (LOAD SENSING)) Variable displacement piston pump With pneumatically suspended seat Retro mechanical displacer Retro hydraulic displacer Price differenceFuel refill pump Selector lever excavator pattern ISO-SAE Rubber pads on stabilizers Safety valves for lifting armSafety valves for loading bucket inclination Safety valves for excavator arm and boom cylinders Overload warning system, EXC. OVERLOAD WARNING SYSTEM, LOADER AUTOMATIC IDLE/STOP Mechanical quick coupler - HMK factory Mechanical quick coupler Hybrid HMK - other brand Mechanical quick coupler Hybrid HMK-JCB Hydraulic quick coupler for 4:1 bucket Standard loader fixed bucket 1.1 m3, 2420 mm width Standard loader 4:1 bucket 1.1 m3, 2420 mm width Godpfx Aowgud Rebhsip Forklift forks on the bucket or quick coupler - tiltable Forklift forks on the bucket ==> 6:1 bucket is attached ==> here bucket is attached to forklift Forklift attachment for heavy loads Hydraulic quick coupler cable set (installation costs not included) ==> must be checked Excavator bucket 40cm with teeth and side cutters - HMK Factory Excavator bucket 0.18 m 3 60cm with teeth and side cutters - HMK make Excavator bucket 90cm with teeth and side cutters - HMK make Clearing bucket 150cm without teeth - HMK WestStift (2x pins per bucket) without road approval "Guarantee 1 year or 1,800 hours, whichever comes first, valid for EU area, or subject to confirmation depending on the country of use" CE certificate Subject to prior sale and errors. Images show original consumption data.

Condition: used, power: 100 kW (135.96 HP), gearing type: hydrostat, fuel type: diesel, lifting height: 20,800 mm, Year of construction: 2020, operating hours: 897 h, Technical information Make of engine: Deutz Top speed: 40 km/h Empty weight: 17.900 kg Gedpfxotr Iqgo Abhjip Functional Lifting capacity: 6.000 kg Identification Serial number: 00003511 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 7.89x2.53x3.12 Additional information Please contact PFEIFER GROUP for more information

Year of construction: 2011, condition: used, functionality: fully functional, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW Giodpfx Abji Ezx Dshep saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Year of construction: 2008, condition: ready for operation (used), Single hopper vibropress with full circulation, 2008. Gisdpfxjiwa H Dj Abhsp The line includes : - Rotho dryer for 2,970 places, - pallets (bretts) 1400x1100, - Sicoma MP2250 / 1500 mixer, - charge for 4 materials for production, - silos 120 and 60 tons, - over a dozen forms, mainly produced by Rampf Formen The line has been operating since 2009, only 5 days a week. It is used for the production of ceiling blocks and concrete blocks. The line layout was built under the existing hall so it does not take up much space.

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused Giedpfxjxnvq Es Abhsp • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 1590, Equipment: cabin, hydraulics, Zenith Machinenfabrik GMBH Neunkirchen/Siegerland GERMANY Used for production of concrete vibropressed pavement and borders. The machine is fully functional and it comes togheter with 2 mixers, bunkers for aggregates, skippers, packaging machine and 150 pallets for production. It also has included molds for different pavement models. We also have to sale a Mobil Zenith 941 II A from 1978 which also has the identification plate attached. Godpfjucruujx Abheip The machine is beeing sold because it was replaced with newer techonology.

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Gsdew R Uziopfx Abhsip