Precision turning lathe

Schaublin 102

Condition: good (used), functionality: fully functional, pneumatic collet clamping device with collets Kdsdpfx Ansz Sppbeiou

Condition: used, Year of construction: 2023, operating hours: 1,007 h, power: 224 kW (304.55 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tire size (front): 600/70 R30, Tire size (rear): 710/70 R42, Operating hours: 1007, First registration: 19.12.2024_____Price: 199,000.00 Euro net. First registration: 19.12.2024, Operating hours: approx. 850. Standard equipment/technical data: ENGINE: Max. power 224/305 kW/hp (ISO 14396), Max. torque 1280 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, Electronic engine control with Vistronic fan control, Engine speed memory, Powercore engine air filter with pre-cleaning for coarse dirt, EasyCare radiator package, Additional fuel pre-filter with water separator, 500-liter fuel tank. Ksdpjw E N Tdofx Aniodu

Condition: good (used), Year of construction: 1998, functionality: fully functional, Schaublin 102 N, Machine number BL 329218, Year of manufacture approx. 1998, Center height 102 mm, Distance between centers 375 mm, Max. turning diameter over bed 200 mm, Max. turning diameter over slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories. Kjdpszlcz Eefx Anijdu

Condition: good (used), Year of construction: 1993, functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Kdsdszlc Apepfx Aniju Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Kodpeztyrqofx Anisdu Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: good (used), Center height: 102 mm Distance between centers: 300 mm Maximum diameter above the carriage: 120 mm Maximum diameter above the bed: 200 mm Spindle bore: 20 mm Collet type: W20 Weight: approximately 450 kg Dimensions: L1200 x W600 x H1400 mm Base: cast iron Kjdpjz Hwffefx Anisdu Equipment: Tailstock, digital cross slide, Tripan turret, tool holder x 3, microscope, chuck, set of 2 drawers, set of collets.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 350100, spindle bore: 20 mm, turning diameter over bed slide: 200 mm, turning diameter over top slide: 120 mm, center height: 102 mm, feed length X-axis: 400 mm, quill travel distance: 90 mm, total length: 1,500 mm, total width: 510 mm, total height: 1,550 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 100 rpm, bed width: 130 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 100 rpm, type of input current: three-phase, overall weight: 660 kg, input voltage: 400 V, distance between centers: 450 mm, travel distance cross slide: 100 mm, Schaublin 102N-VM CF precision lathe in excellent condition, fully functional. The machine has undergone a geometric inspection (inspection report available). Kjdoz E Dymspfx Aniodu Included equipment/accessories: - W20 collet set - 4-jaw chuck - Tripan tool turret with tool holder - 2 quick-change 6-jaw chucks - Drilling chuck - CCEA LED lamp - Gear set Machine available for viewing and testing at our premises in Switzerland. Price: CHF 29,900.– (excluding VAT) Loading and transport possible upon request.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Kodpozb U Epefx Anisdu Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Kodpfxocuhvue Aniodu Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock!

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder 1 set of W20 collets 2 drawers lamp 380 VAC Centre distance: 350 mm Center height: 102 mm Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Kedpfx Aed Htvdjniedu Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Weight: approx. 500 kg Machine size W x D x H: approx. 1300 x 600 x 1300 mm Different "Schaublin 102" models in stock!

Condition: good (used), SCHAUBLIN 70 lathe Ksdpfx Asztcz Uonijdu

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running Ksdpfx Anocpznhoisdu 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: good (used), Center height 102 mm Distance between centers 450 mm Kdedpfxjcug H Ss Aniju Leit.- / feed shaft Collets W20 available Speed: about 210 - 3000 U / min reducer gear Left.- Rightrunning 2-Multistage drive L x B x H: approx 1760 x 595 x 1230 mm Weight: 650 Kg Different "Schaublin 102" models in stock!

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: Kedpfxjwvq Tme Anijdu >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: used, TECHNICAL DETAILS - center height : 102 [mm] - Max. diameter on bench : 200 [mm] Kedpfx Asw Ihttsniedu - Distance between centers : 470 [mm] - Type of spindle clamp : W20 - Boring : 20 [mm] - Passage of bar in clamp : 14.5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] - Machine height : 1300 [mm] - Machine weight : 500 [kg]