Vertical Turret Lathe - Single Column

SCHIESS- FRORIEP 14DKE 1250

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 379082, Single-column vertical turning lathe | Schiess-Froriep 14 DKE 1250 The machine was overhauled in 2015 by Matschuk, recently cleaned and is in good condition. Gijdsyfurqopfx Albou - Table diameter: 1,250 mm - Swing diameter: 1,500 mm - Turning height: 1,250 mm - Siemens control system type 840 Dsl - Tool holder Inspection is possible at any time by prior appointment.

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Giodpst Hww Djfx Albsu Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: excellent (used), Year of construction: 2004, pressing force: 400 t, stroke length: 680 mm, working width: 4,100 mm, Used, Very Clean high quality Bystronic 400ton x 4metre Cnc Hydraulic Press Brake for sale Gijdpfx Aljv Dw Syjbju Very clean 4metre cnc pressbrake for sale – Bending / Folding machine down stroke pressbrake for sale With Extended daylight and stroke Make= Bystronic Model = PR10 400x4100 PR400 Bed Length 4100mm / 4.1metre 8axis – 6axis back gauge Y1, Y2, X1,X2,R1,R2,Z1,Z2 x2 Front powered sheet followers / lifting aids Hydraulic tool clamping CNC Hydraulic Press 400 Tonne Capacity Swiss made Cybelec Controller – MoEva12 Multiple Forming Tools Tool stacking system included Full Working Order and fully serviced with Bystronic UK Max closing speed 200 mm/s Complete with a good selection of tooling

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, GP300 CNC gear hobbing machine, WET AND DRY MACHINING available as required. Both options are freely selectable. Siemens 840D Solution Line, 5-axis system, suitable for shaft and disc-type workpieces. Max. Ø300 mm, max. module 6, swivel range ±45°, axial travel 440 mm, hobbing power 15 kW, HSK-B80, table Ø300 mm, direct drive, speed 90–900 rpm. High precision, digital drive technology (Sinamics S120), automatic head positioning 0.001°, linear guides, safety retraction, temperature compensation, full enclosure. Giodpfx Asxqn Tqelbou

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 1750 kg sawing motor: 2,2 kW total power requirement: 5 kW cutting speed: 17 - 90 m/min cutting diameter: 320 mm cutting range max.: 320 x 320 mm saw band length: 4.930 x 34 x 1,1 mm feed length: max 9x 600 mm dimensions of the machine ca.: 2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual, Gjdovpt Eyjpfx Alboiu *

Condition: new, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 1,500 rpm, turning diameter over cross slide: 1,000 mm, total length: 2,510 mm, total height: 3,546 mm, total width: 4,155 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, turning height: 825 mm, mount diameter: 1,000 mm, workpiece diameter (max.): 1,100 mm, overall weight: 16,000 kg, VERTICAL LATHE WITH MOTORIZED TOOLS TECHNICAL SPECIFICATIONS: Axes: - Maximum swing diameter: 1100 mm - Maximum turning height: 825 mm - Maximum turning diameter: 1000 mm - X axis travel: 500+40 mm - Z axis travel: 850 mm Spindle: - Maximum speed: 1500 rpm - Spindle nose: ASA A2-15 - Maximum workpiece weight (including chuck): 1250 kg Turret: - Number of positions: 12 - Maximum speed: 3000 rpm - Turret interface: BMT-85 Feed Rates: - Rapid traverse X / Z: 20 / 20 m/min - X axis ballscrew: diameter 50 x 8 mm - Z axis ballscrew: diameter 50 x 8 mm Motors: - Spindle motor: 37-45 kW - Motorized tool motor: 7 kW - X and Z axis servomotors: 4-7 kW General Data: - Length: 2510 mm - Width: 4155 mm - Height: 3546 mm - Weight: 16,000 kg INCLUDED ACCESSORIES: - Fanuc 0i-TF Plus numerical control (15''), Type 0, color graphic display, Manual Guide I, ONG keyboard, electronic handwheel - Serial, Ethernet, and USB ports - Belt-driven spindle, 1500 rpm, Alpha40/6000i, 37-45 kW, ASA A2-15 - Supplied without chuck - Servo-assisted BMT turret, 12 positions, prepared for motorized tools - Chip conveyor - High-pressure pump 15 BAR Godpfx Ajyxg N Ajlbeiu - 3-color alarm and cycle-end lamp - Integrated work light - Leveling feet - Tool box with service keys - Air blow system through the spindle - Upgraded turret motorized tool motor – from Fanuc a30iF (30Nm) to Fanuc a40iF (38Nm) - Dual pressure release - Renishaw M.T.P. manual presetting - Oil skimmer - Static toolholder kit - Fume extractor predisposition - Black color NEW MACHINE IN STOCK FOR IMMEDIATE DELIVERY

Condition: like new (used), Center height over bed: 330 mm, max turning diameter over carriage: 408 mm, max turning diameter over bed: 640 mm, max turning diameter in gap: 899 mm, distance between centers: 2000 mm, variable spindle speed, rpm: 18-1500, spindle bore diameter: 105 mm, spindle nose: ASA 11”, tailstock: MT5, quill diameter: 90 mm, travel: 250 mm. cross slide travel: 275 mm. main motor: 15 hp. machine weight: 3450 kg. Gedpfx Aex Dikkolboiu

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Gsdpfxsxdmgvs Albsiu Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Year of construction: 2022, operating hours: 108 h, condition: refurbished (used), machine/vehicle number: SN2120, EDM312MF30-SLM (second-live machine) Technical data: Adjustment travel: 450x300x300mm workpiece clamping table 820x400mm tank size 900x520mm filling height 300mm distance table/electrode holder 150/450mm workpiece weight max. 800Kg Dielectric max. 700l dimensions WxDxH 2700x1800x2350mm Machine weight 2500kg Mains connection 3/N/PE 400/230 50Hz power consumption 6,7 KVA Equipment: Color: new painting light grey + telegrey New control cabinet New control APC910/2 (win10) User interface MF30 V 2.8 New drives B&R with Endat interface Screen touch screen Generator exopuls+ 60A Rev.4 WZW 5-fold Touch protection operable via push button Linear scales in all axes X, Y, Z (Fagor) cartridge filter 2 pieces Cooling unit Termogamma Complete new machine installation Gijdpehtrdyefx Albou New ball screw, bearing, coupling Maintenance unit with digital pressure switch Valve island Co² extinguishing system C-axis Hirschmann 50/min., holding brake Refurbished Manual control bar with enabling button Lowering tank automatic tracking chuck Erowa IST, Hirschmann, 3R Warranty 12 months Transport commissioning on site training

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine Gjdpfxocc D Dds Albsiu manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.