Schweyer CB-EL - Belt conveyor

Schweyer CB-EL

Year of construction: 2009, condition: used, Scanvaegt RF5 checkweigher serial: BMP01014 2009, stainless frame, weight range 600g - 5000g, up to 40 packs per min, max product 300mm x 220mm, total length 800mm Redpfedqapdox Airech

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle Rcedpfx Aezrmk Reirjh at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional solution for crosscuts, miter cuts, and bevel cuts The ZS 200 N is ideally suited for crosscuts, miter cuts, and bevel cuts. Materials such as wood, PVC, and aluminum profiles can be processed cleanly and precisely. The saw unit runs on a hardened guide arm and can be swiveled horizontally on both sides for miter cuts. The "N" stands for "Neigung" (inclination) and indicates that the saw unit can also be tilted vertically on the side – thus, bevel cuts can also be carried out easily. Fact Check ZS 200 N Crosscut and miter saw with a maximum cutting height of 200 mm Stable cast iron construction Precise ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Fast miter adjustment up to 65° horizontally and up to 60° vertically Adjustable stops and lower saw blade guard Can be connected to a dust extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical Details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45°-90°-25° Rsdpfx Aioh Nu Iueroch Miter range vertical 60°-90°-30° Saw blade diameter 520 mm Weight 310 kg Scope of delivery: Miter and bevel saw ZS 200 N Machine stand Machine can be tilted on both sides from the front Hydraulic feed brake Circular saw blade HM Z 60 negative Operating tool and hand crank

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. The system can be tested at our test center, 20 km from Frankfurt am Main. Features - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually - Tool-free format changeover Technical data - Weighing range: 20g to 4000g Redpfx Aijya Ahvjrsch - Accuracy: up to 0.5g, depending on product - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new Redpfx Aiov Diy Asrech with new electrics new Siemens S7 control system Completion upon order Crosscutting machine with chalk mark detection Wood cross-sections 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter electric thickness adjustment

Condition: good (used), Fortress Phantom Metal Detector Fully stainless steel Aperture 500mm wide x 225mm high Redpfx Aoxtfw Seirjch 1500mm long Belt Stop and alarm Video available on request

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg Redsu H Acyepfx Airsch

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Rcsdpfx Aijr U St Uorjh Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: excellent (used), Year of construction: 2008, spindle bore: 52 mm, turning diameter over bed slide: 400 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,209 mm, total height: 1,800 mm, overall weight: 2,100 kg, Centre lathe Mexpol - TUB40 MACH-ID 9477 Make: Mexpol Type: TUB40 Year: 2008 DBC Turning Length: 1000mm Swing over bed Ø: 400mm Swing over cross slide Ø:250mm Spindle bore: 52mm Spindle power: 5.5kW Bed width: 300mm Tailstock spindle Ø: 60Ø Redpfxjyyxm Ao Airoch Stroke pinole: 130mm Spindle taper: 4Mk Power: 5.5kW Speeds / ranges: 2135Rpm Feed rate X-Axis: 2000mm/min. Feed rate Z-Axis: 1000mm/min. Length: 2200mm Width: 1209mm Height: 1800mm Weight: 2100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2016, A total of three similar-design stickpack and sachet packaging machines Josef Blazek are available. Lanes: 5, years of manufacture: 2008/2009/2016, products: powders/granulates/bulk solids, bag sealing: 3-sided, max. film width: 220mm, bag width range: 10mm-48.5mm, bag length range: 50mm-130mm, cycle rate: 50cycles/min. The machine with the year of manufacture 2016 is equipped with a feed screw. Documentation available. An on-site inspection is possible. Individual sale possible. Rcsdszcp Uzspfx Airsh