Case packer for bottles

SOTEMAPACK WRAP AROUND | 12 pack/min

Condition: used, Semi-automatic PET bottle blow molding machine Manufacturer: FERENC Model: F-1400 Year of manufacture: 2006 Output: approx. 800 pcs/h Number of molds in the machine: 2 x 5 L (48 mm cap) Oven dimensions: - Length: 900 mm - Width: 900 mm - Height: 1200 mm Chsdpfxougu E Rs Ab Uea Blow molder dimensions: - Length: 1800 mm - Width: 750 mm - Height: 2000 mm Set weight: 1200 kg Technical condition: used machine

Condition: good (used), 50-position filler with crown cap closure. Cedpevq Suijfx Ab Usha Used in a winery for filling wine into 1L glass bottles

Year of construction: 1998, condition: used, Shrink-wrapping machine for shrink-wrapping 6 or 12 bottles with manual loading of cardboard trays, or can also be used without trays (only with film). Chodpfx Ajb Im Ttsb Uoa

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26180X.30 Serial Number blocking unit: 136 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT 80 Reference-# empty pallet dispenser (pallet terminal): 26180X.40 Serial number empty pallet dispenser (pallet terminal): 78 Includes pallet conveying, reference-no: 26180X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Cjdohrmlgopfx Ab Usha Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is

Condition: new, Year of construction: 2005, functionality: fully functional, Machine slides for washing jars and bottles Csdpfxjvtf R Ns Ab Ujha the machine is new, never used

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Chodpfx Abju I N Npe Usa Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. .

Condition: used, Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Cedjwr T E Djpfx Ab Uoha Technical conclusion In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.  

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 336.067, 3-head glass bottle capping machine Csdpew R Tvxsfx Ab Ujha

Condition: used, Year of construction: 2019, Overview Cedpewgyx Tsfx Ab Uoha The shrink packer CERMEX CP18 CAE was manufactured in 2019 by the French company CERMEX. This is a shrinkwrapper with accompanying sealing bar. The machine has run only 1,100 hours and is immediately available, as the production in the factory was stopped in 2022. Truck loading is included. Technical data - Capacity: Up to 40 ppm (packs per minute) - Formats: 75cl – 3x2 - Dimensions: L. 623 cm × W. 250 cm × H. 210 cm - Working table height: Adjustable from 0.9 m to 0.95 m - Electrical power: 30 kW

Condition: used, Year of construction: 2006, operating hours: 6,800 h, Used Dimac Planet 45 WrapAround Packer 2006 This wrap around packer was produced by Dimac in 2006, and it is the model Planet 45. The machine is still in production with 6728 working hours. This used wraparound Dimac produces 45 packs per hour and processes various formats including bottles and cans. Chsdpfx Abovgvy Io Usa It has various spare parts available upon request. It is complete with user manuals and safety features in accordance with the law. The used Dimac Planet 48 Wrap Around Packer 2006 is in excellent condition and ready for sale. Technical specification: The Used Dimac Planet 45 WrapAround Packer has straight inlet with a bottle sorter at the inlet. We have 22 formats available inserted into the machine. The operator side is on the right side of the you want it can also be changed without any particular problems. If you need ribbons we can also sell those separately; You just need to have a layout to check their feasibility, we have many ribbons available. Dimac used wraparound overhaul services: We also provide assistance and maintenance services for used wraparound Dimac and Robopack machinery in general automation of the Athena group company. We carry out disassembly and assembly with our technical team anywhere in the world. In the case of overhauls, the delivery time is only affected by the delivery of the electrical parts. We also carry out audits in your company, it is necessary to first carry out an inspection to verify its feasibility. In the case of this machine which has a few working hours, delivery is immediate as it is in excellent condition. Contact us for a quote or an inspection, we can move, disassemble, reassemble entire bottling plants. We carry out an inspection by our staff or through your layout and video/photos of your system.