CNC turn-mill center

Spinner TC 800 - 85 MCY

Condition: used, Year of construction: 2017, New spindel 2025-08 yearly service by Mazak Servicecenter. includes bar feeder Super 80 Max swing Ø 658 mm Swing over X-slide Ø 658 mm Swing when Y-axis is operating Ø 658 mm Max turning diameter Ø 658 mm Max turning diameter from bar Ø 51 mm (option Ø 65) Max part length 1011mm X axis: 615mm Y axis: +/-130mm z axis: 1077mm B axis: 0,0001Deg / 240° Spindle 1 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole 51 mm (option Ø 65) Spindle motor AC 22 kW 40% ED Speed range 35-5000 rpm Number of speed ranges Direct drive Max torque 467 Nm 25% ED Max part weight including chuck 300 kg Center height from floor 1235 mm Spindle 2 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole Not applicable (option Ø 65) Spindle motor AC 18.5 kW 40% ED Speed range 33-5000 rpm Number of speed ranges Direct drive Max torque 325 Nm 40% ED Max part weight including chuck 300 kg Center height from floor 1235 mm C-axis 1 Type Direct drive Rapid feed 555 rpm Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree C-axis 2 Type Direct drive Rapid feed 555 rpm Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree W-axis Movement 1066 Rapid feed 30 m/min B-axis B-movement 240 degrees Max machining feed (ISO) 40 rpm Minimum programmable increment 0.0001 degree Tool Holder Type: Tool changer Tool Shank Size: 25 x 25 mm Tool Change Time, tool to tool: 1.3 seconds Chip-to-chip time, average: 8 seconds Tool Holder for rotating tools: Capto C6 Tool Holder for turning tools: Capto C6 Max Tool Weight: 12 kg Max Tool Length: 400 mm Clamping Force for Tool (Capto C6): 33 kN Tool Magazine: Number of tool positions: 36 pcs Max Tool Diameter: 90 mm Max Tool Diameter when the position before and after is empty: 125 mm Max Tool Length: 400 mm Max Tool Weight: 12 kg Nodpfjx Hfl Ejx Adwscl Max Torque for Tool: 9.8 Nm Other: Length: 3990/4910 mm Width: 2800 mm Height: 2720 mm Weight: 13100/16600 kg Power Requirement, continuous: 72.34 kVA Air Requirement, min: 5 kg/cm², 410 liters/min Tool Magazine: 36 tools Standard Equipment: B-axis Capto C6 ATC Auto Recovery Auto power on/off, heating schedule 19” LCD touchscreen Mazak tool identification system including 10 ID chips (for Capto C6) Measurement arm for tool length setting, automatic compensation, and tool breakage detection 8” Chuck Type: Kitagawa B208A6 8” Chuck Type: Kitagawa B208A6 Coolant Tank Coolant Pressure for Upper Turret: Max 5 bar, 23 l/min Set of Manuals: (digital) Smooth Standard Software: Mazacc 2D software (shape comp) Mazacc 2D software för roterande axlar (shape comp) Mazacc 3D High Speed software High Smoothing Control Seamless Corner Control Variable Acceleration Control Ultra High Speed Machining Mode Rapid Overlap ISO/EIA Programming: Lathe and milling spindle start unsynchronized Synchronized threading with rotating tools Macro interruption allowing event-driven ISO/EIA programs Macro programming with 600 additional variable pairs for ISO/EIA Helix interpolation for ISO/EIA Coordinate rotation with G68 for ISO/EIA Polar coordinates, G122 for ISO/EIA Synchronized interpolation X-C-axis G12.1 for ISO/EIA Coordinate systems G54 - G59 + 300 additional for ISO/EIA Direct input of drawing dimensions, e.g. starting corner for ISO/EIA Inverse Time Feed (G93) 3D Cutter Compensation (G40-G42)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 10,000 mm, total length: 12,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/10M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Nedpfx Adova Ebnowscl Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 10000 mm - turning diameter over bed: 1550 mm - turning diameter over support: 1220 mm - turning diameter in bridge recess: 1880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 12500 mm width: 2130 mm height: 1550 mm total weight: 17700 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Year of construction: 1971, condition: ready for operation (used), machine/vehicle number: 713406, -KOM 105- Offered here is a grinding machine from the company Kehren & Co with a filter system from the company FAUDI. This is a segment grinding machine with vertical grinding spindle. The machine has 2 grinding tables/magnetic plates for pendulum machining. Njdpfxog Nt A Es Adwocl Technical data: Grinding machine: Manufacturer: Kehren & Co Type: D7B Year of manufacture: 1971 Make No: 713406 2 grinding tables/ magnetic plates with 700mm diameter. Grinding method: segment grinding Control: Marposs weight: 6.600kg Filter system: Manufacturer: Faudi - Filtersystems Type: AFB 1,3 / 1001 Year of manufacture: 1992

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Njdpfew Rl S Sex Adwecl Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Year of construction: 2024, condition: used, Grinding wheel holder:: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm max. width of grinding wheel: 70 mm Grinding wheel bore diameter: 20 mm Speed of the diamond / CBN disc spindle: infinitely variable 100 - 1000 rpm., Radius of the grinding wheel: 0-30 mm Dimensions of the dressing wheel: 180 x 25 x 31.75mm, Speed of rotation of the dressing wheel: 200 - 2000 rpm., Oscillation stroke of the dressing wheel: 0-70 mm Connected load of the motor of the dressing wheel: 2,2 kW Weight approx: 1400 kg Dimensions L x W x H: 1850x2300x2100mm, Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure. Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel), Wheel motor strengthened to 4 kW, Dressing wheel motor strengthened to 2,2 kW, 2 Machine lights 12 V, Optical linear scale with digital display counter (0,001 mm) X, Z Axes, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included), High performance swivelling angle reader (0,05°), Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm, Nedpfxolfil So Adwscl Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm, Stepless oscillation speed, Automatic central lubrication, SIC Wheel dresser manual,

Condition: good (used), Year of construction: 2002, HEIDENHAIN TNC 430 control Spindle speed 20–9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Tool holder SK 40 16-station tool changer Nodpfswglfxex Adwocl Rotary table with B and C axes Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement

Condition: used, Year of construction: 2008, Swing over bed 923,8 mm Swing over cross slide 755 mm Max. turning diameter 356 mm Max. turning length 510 mm Ncedju Sn Hzjpfx Adwjl X/Z-axis movement 260/590 mm Turret w/12 stations Spindle speeds 5000 rpm Spindle bore 73 mm Control: MSX-850 III Equipped with: Collet chuck w/collets Chip conveyor 3 standard tool holders No Gantry loader incl.

Condition: good (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, warranty duration: 12 months, Equipment: documentation/manual, DELIVERY TO UK ONLY Global S Green 05.07.05 HH-AS6-T5, 5° Automatic Indexing Head HP-TM Touch Trigger Probe Standard Styli Kit PC-DMIS Measurement Software Year of Manufacture 2019 Please contact us for alternative configurations. Measuring Range: X 500mm, Y 700mm, Z 500mm Ncedpfxsu Sntho Adwjl MPE(E0/E150) (18 °C - 22 °C) 1.5 + L/333

Condition: used, Article: clamping head Manufacturer: Different For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or Ncsdjn H Nzuspfx Adwsl *

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: Njdpfxsh Rdwxs Adwscl - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.