High-bay warehouse

SSI Schäfer PR600 / INP 120x60mm / Kopftraverse

Year of construction: 2019, condition: like new (used), Complete Ilapak weighing and bagging system. Includes a vibration feeding. incline flighted belt conveyor. 10 head multihued weigher with 2.5 litre s/s buckets. Vegatronic 500 with 300mm jaws with plc for pre printed film. Markum printer and out feed conveyor. Psdpfx Agsywi Dajgspw

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Pjdpoh Ek Daefx Aggspw - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: new, functionality: fully functional, power: 30 kW (40.79 HP), Year of construction: 2025, A double roller crusher for sand making, also known as a roller sand making machine, is a processing machine that utilizes two rollers to crush and reshape coarse-grained materials such as rock, stone, and ore into finer particles. This type of equipment is commonly used in the production of construction aggregates, artificial sand, and other materials used in various industries. Here are key features and aspects of a double roller crusher for sand making: 1. Double Roller Design: - The crusher has two parallel, counter-rotating rollers that exert pressure on the material. The gap between the rollers can be adjusted to control the size of the crushed particles. 2. Crushing Mechanism: - The material is fed between the two rollers, and as they rotate, the material is drawn into the crushing zone. The rollers compress and crush the material, reducing it to the desired size. 3. Material Feed and Discharge: - The material is typically fed into the top of the crusher and is crushed between the rollers. The crushed material exits at the bottom of the machine. 4. Adjustable Gap Settings: - The gap between the rollers is adjustable, allowing for control over the final size of the crushed material. This feature is essential for producing materials of different particle sizes. 5. Roller Surface Design: Ppsdoq Ngamopfx Aggjw - The surface of the rollers may be smooth or have corrugations to enhance the gripping and crushing action. The choice of roller surface design depends on the characteristics of the material being processed. 6. High Efficiency: - Double roller crushers are known for their high efficiency in crushing and shaping materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 7. Versatility: - These crushers are versatile and can be used for various materials, including hard and soft rocks, ores, and other aggregates. They are particularly suitable for producing artificial sand. 8. Dust and Noise Control: - Some double roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. Application in Sand Making: - Double roller crushers for sand making are commonly used to produce fine aggregates and artificial sand. They are employed in the production of high-quality sand for construction and other applications. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Motor and Drive System: - A powerful motor and a reliable drive system are essential components to drive the rotation of the rollers and ensure consistent and efficient crushing. The specific design and features of double roller crushers for sand making can vary among different models and manufacturers. When selecting or using this type of equipment, it's important to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Condition: good (used), Graseby Best Checkweigher Ppedpfsgmth Sex Aggjw Stainless frame, overall length 1600mm, weigh platform 440mm x 300mm, weighs from 100g - 500g, pneumatic blow reject into reject bin, 3Ph

Year of construction: 2011, condition: new, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, Electric cable hoist i=28 New in original packaging as a parts carrier or for installation, see pictures GDR3 H12 Motor ZBR100 B4 B050 Ppodpovylhbofx Aggew

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 1,945 mm, total height: 1,375 mm, total width: 1,206 mm, input voltage: 400 V, overall weight: 600 kg, year of last overhaul: 2026, roll width: 580 mm, air pressure: 6 bar, film width: 580 mm, Equipment: CE marking, Vertical Packaging Machine Ilapak Vegatronic 500 VT500 The machine is in very good condition and ready for operation. - Maximum package width: 270 mm - Minimum package width: 50 mm - Maximum package length: 350 mm - Maximum film width: 580 mm - Sealing jaw width: 300 mm - Sealing jaw type: constant heat - Control: PLC, HMI Omron - Memory: 40 programs - Power supply voltage: 400V AC - Output up to 100 pcs/min - Machine dimensions: 1206x1945x1375 mm - Machine weight: 600 kg - Possible integration with weigher, printer Ppjdpfxsyw Ud So Aggjw

Condition: used, functionality: fully functional, Year of construction: 2016, 🚀 GEDA 500 Z/ZP – OKOMITA DIZALICA / TRANSPORTNA PLATFORMA Rabljena, 2016. godina – potpuno servisirana u GEDA Njemačka - puno novih djelova! Jamstvo: ORIGINAL TVORNIČKO - 12 mjeseci 🏗️ ZA PRIJEVOZ LJUDI I MATERIJALA – PROFESIONALNO RJEŠENJE ZA GRADILIŠTA Podjxvyi Uopfx Aggopw GEDA 500 Z/ZP je dvostruko rješenje: može se koristiti kao dizalica za materijale ili kao transportna platforma za prijevoz osoba i tereta. Zahvaljujući dvostrukom upravljačkom sustavu, nudi maksimalnu fleksibilnost, sigurnost i brzinu rada. Brzina dizanja do 24 m/min u načinu za materijale i 12 m/min u načinu za prijevoz osoba omogućuje učinkovit i siguran rad i na najzahtjevnijim projektima. Kompaktna konstrukcija, prostrana platforma i mogućnost prilagodbe čine ovaj model idealan za montažu skela i rad na višekatnim objektima. ⚙️ TEHNIČKE SPECIFIKACIJE Proizvođač: GEDA (Njemačka) Model: 500 Z/ZP Godina proizvodnje: 2016. Jamstvo: 12 mjeseci (potpuno obnovljena i servisirana u GEDA Njemačka) Puno novih djelova Pogon: 3,0 / 6,1 kW / 400 V Visina dizanja (max): 100 m Nosivost: 850 kg (materijal) / 500 kg (osobe) Brzina dizanja: 24 m/min (materijal) / 12 m/min (osobe Dimenzije platforme: D 1,6 m × Š 1,4 m × V 1,1 m Mast sistem: GEDA UNI-X-MAST Stanje: tehnički i optički – ODLIČNO 🧰 PRIBOR ZA VISINU DIZANJA DO 25 m Pribor za veće visine na upit. Čelični stupovi 1,5 m – 17 kom Sidra za učvršćenje stupa – 6 kom Vodilice za kabel – 6 kom Kabel za visinu dizanja do 50m Sve dizalice su servisirane i obnovljene u Njemačkoj, spremne za rad i isporuku. +++UZ GEDA 500 Z/ZP IDE ORIGINAL TVORNIČKI KONTROLNI LIST ZA ISPRAVNOST DIZALICE+++ 💡 DODATNE INFORMACIJE ✅ Jamstvo 12 mjeseci od dana kupnje ✅ GEDA certifikat kvalitete i sigurnosti ✅ Upute dostupne na hrvatskom, njemačkom i engleskom jeziku ✅ Platforma zakretna 90° – lakši utovar i istovar ✅ Minimalni zahtjevi za prostor i brza montaža ✅ Različite verzije platforme – s vratima i preklopnim mehanizmima za prilagodbu svakom gradilištu 🆕 NUDIMO I NOVE GEDA DIZALICE I KOMPLETNU OPREMU Uz rabljene modele s jamstvom, u ponudi imamo i nove GEDA dizalice, transportne platforme i dodatke: Dizalice za materijal i osobe Okomite i kose građevinske liftove GEDA-STANDARD 200KG, COMFORT 250KG I FIXLIFT 250KG-2BRZINE DIZANJA Sve nove i rabljene obnovljenne GEDA dizalice dolaze s punim jamstvom proizvođača, dostupne za trenutnu isporuku uz podršku i servis u Hrvatskoj. PRVA RUKA – GENERALNI ZASTUPNIK GEDA DIZALICA ZA HRVATSKU VEĆ VIŠE OD 30 GODINA. Specijalizirani za prodaju, najam, servis i obnovu GEDA liftova, dizalica i kompletne opreme.

Year of construction: 2009, condition: used, Multiweigh 2010, dimple plate with discharge gate 6 liter buckets. Pjdpfxeliun Rj Aggspw

Condition: excellent (used), Year of construction: 2012, operating hours: 8,200 h, functionality: fully functional, repeat accuracy: 0.3 mm, table width: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, table length: 3,200 mm, milling spindle speed (max.): 12,000 rpm, ____RoboMill 2KR240 S20BT40 TT6t TB16 WM1 Collected Next Generation Robotic Stone Processing Complex “NO CONCRETE FOUNDATION REQUIRED” The robotic complex presented here is based on a KUKA KRC2 robot from 2012. The system can also be supplied with: - used KUKA KRC4 robots, - brand-new KUKA KRC4 robots, - next-generation KUKA KRC5 robots. Our company also offers larger robotic configurations based on the KUKA KR360 / KR500 platform, available in both used and new versions. Additional configurations are available with: - fully automatic spindle and wire-frame exchange systems, - additional milling spindles, - wire-saw frames of various widths, - additional technological heads, - rotary tables with payload capacities of: - 10 tons, - 20 tons, - 30 tons, - additional protective safety fencing systems. Introducing RoboMill — an adaptive multifunctional robotic system designed for: - milling, - contour cutting, - wire-saw processing, - stone slab machining. The key feature of the complex is its monobase construction, where all major system components are integrated into a single steel platform. The robot, rotary table, electrical communication, air and water lines, spindle cooling system, positioning systems, tool banks, and auxiliary mechanisms are all mounted on one rigid structure. This engineering approach provides several major advantages: - preservation of system geometry even after transportation - elimination of concrete foundations - rapid deployment at a new location - preservation of CAM-system mathematical accuracy without recalibration Installation requires only: - positioning the platform on the surface - drilling six anchor holes - fixing the structure using chemical anchors - connecting electrical power, compressed air, and water supply After that, the system is ready for operation. - Standard Configuration The complex is equipped with: - industrial KUKA robot - automatic 16-position BT40 tool bank - semi-automatic spindle and wire-frame exchange system - rotary table with payload capacity up to 6 tons - 3200 × 2200 mm slab-cutting platform for disk machining - integrated spindle cooling system Podpfx Agezawm Hjgspw - internal routing of electrical, pneumatic, and water communication ____Robot System Functions The robot memory contains: - semi-automatic spindle and wire-frame exchange programs - all 16 spatial tool pickup and return programs - external kinematic models of the rotary table - auxiliary positioning and safe-transition programs Because all components are rigidly fixed to a single monobase structure, the center distances between the robot, table, and technological modules remain unchanged even after transportation. This allows the CAM mathematical model to remain fully valid while minimizing setup and recalibration time after installation. ___RoboMill is not just a robot. It is a mobile industrial platform for modern automated stone processing.

Year of construction: 2002, condition: ready for operation (used), Max. load capacity: 1t, with documentation, on-site inspection is possible. Pedpfx Agorkn Uzjgopw