Crate racking Shelf racking Shelving system

SSI Schäfer R3000 / SSI Schäfer LF322

Condition: new, Year of construction: 2025, Genie GS2646 NEXT GENERATION E-Drive scissor lift, new, used, demo machines available Nedpornnc Rjfx Adwjdd

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Ndjdsu S Ahqjpfx Adwsd Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Year of construction: 2024, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Nodpsidlpiofx Adwedd Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Ndsdpod Rzc Rofx Adwed

Year of construction: 2006, condition: excellent (used), 70 rm pallet rack SSI Schaefer Palflex incl. insertion grid second hand, good condition, see pictures year of construction 2006 height 4 m depth 120 cm field load 12000 kg frame galvanized Beam red Inlay grid included! 2 pcs. grids per 2,7 meter beam length Negotiable price: € 6.950,-- net ex stock Offer consists of: + 26 pcs. frames pre-assembled, depth 120 cm, height approx. 4 m +100 pcs. beams, length 2,7 m, 1500 kg payload/shelf with evenly distributed load +200 pcs. suspension guards +100 pcs. galvanized insertion grids for 50 levels of 2.7 m beam length each +104 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Ndedpfx Adekx E I Nowod Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: new, range L-W-H 1610 x 460 x 920 mm Ndedpfx Adou Iml Uswod weight 93,5 kg 20 St. Workshop trolley with 20 pcs. Drawers and 40mm solid wood panel Fixed ball bearing guides (double bearings), anti-slip mat in each compartment, Thick rubber top mat, central locking, 6 heavy duty wheels 125 mm. including 4 swivel castors with brakes, central locking for all drawers. Anti-slip mat in each compartment. Solid ball bearing guides for the drawers. (Double stored) All drawers can be opened 100%.

Condition: new, - Panel width 710 mm - Backgauge Nedpfx Ash Ramgsdwedd - Adjustable stroke

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Ndsdpfju Uvalex Adwod Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: used, mileage: 38,442 km, power: 88 kW (119.65 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,799 kg, empty load weight: 1,950 kg, maximum load weight: 849 kg, first registration: 09/2020, fuel consumption (urban): 8.7 l/100km, fuel consumption (extra-urban): 6.4 l/100km, fuel consumption (combined): 7.4 l/100km, emission class: none, color: yellow, driver cabin: other, suspension: other, number of seats: 3, Year of construction: 2020, total length: 5,399 mm, construction height: 1,950 mm, fuel: diesel, Equipment: ABS, airbag, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, Engine failure. Special features: Passenger-side airbag, wide-angle exterior mirror, rear parking aid with rearview camera, rear hatch with glass, Clear View package, cargo partition with window, full wheel covers, left-hand sliding door for cargo/passenger compartment, front side airbag. Ndsdpowhgl Nefx Adwsd Other features: Driver-side airbag, anti-skid control (ASR), electric exterior mirrors. Adjustable and heated, 85 Ah battery, on-board computer, tachometer, automatic headlight activation, no keyless entry, glove compartment with cooling function, interior filter: pollen filter, body/structure: van, fuel tank: 80 liters, steering column (steering wheel) adjustable, model update, 2.0-liter - 88 kW dCi Diesel Energy engine, rear fog light, radio preparation, wheelbase 3498 mm, tire repair kit, low emissions according to Euro 6d-TEMP emissions standard, full-LED headlights with LED signature C, sliding door for cargo/passenger compartment on the right, seat cover/upholstery: fabric, seats in the driver's cab: double passenger seat, seats in the driver's cab: 3-way adjustable comfort driver's seat, engine start/stop system, LED daytime running lights, lashing eyes on the side of the cargo area, preparation for electrical system, heat-insulating glazing CoC available. Equipment was determined using a VIN check; technical errors may occur here! Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, cutting height (max.): 250 mm, working height: 850 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC crosscut saw UKS 1.000 Cross cuts: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Max. cutting height: 260mm Nodpjrfudrsfx Adwodd Saw blade: 700mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request