Robot

STÄUBLI RX60CR

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min Dcsdpfx Adjrt Ip Nsdjr 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Dcsdjia Rtdjpfx Adder Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1996, grinding length 600 mm Dcedpfx Adst Tqrnoder grinding width 250 mm workpiece height ca. 385 mm table surface area 600 x 200 mm table speed -stepless- 2 - 35 m/min table load capacity max. 250 kg grinding wheel size ø 225 x 25 mm grinding wheel hole diameter 50,8 mm vertical feed autom. 0,001 - 0,099 mm rapid traverse vertical 600 mm/min cross feed of table continual 10 - 1000 mm/min rapid traverse cross 1000 mm/min total power requirement 6 kVA dimensions of machine L x W x H 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables Dsdpfx Ajrz Nflsddocr - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: MA0139_1335, Exhibit immediately available: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and 315 liters compressed air tank Control Sigma Control 2 Year: 2024 Operating hours: 1 hr Pressure: 8 bars Rated power: 11KW Delivery quantity: 2.00 m³/min Sound level: 66 dB(A) Dcodpfjhwwyrsx Addjr Compressed air outlet: 1" Compressed air tank: 350 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 750 x 1335 x 1880 mm Weight: 579 kg Visit our store. We always have a wide range of new and used compressors in stock!

Condition: good (used), power: 30 kW (40.79 HP), Year of construction: 2010, operating hours: 51,548 h, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, pressure (max.): 8 bar, rotational speed (max.): 2,945 rpm, machine/vehicle number: 100609.1, Equipment: type plate available, The Kaeser ASD 57 is an energy-efficient screw compressor designed for reliable compressed air supply in industrial applications and is characterized by its compact design and quiet operation. With advanced Sigma profile technology and intelligent control, it offers optimum performance and durability. Technical details: Item number: 100609.1 Serial number 1941 Year of manufacture: 2010 Nominal output: approx. 30 kW Maximum operating pressure: 8 bar Engine speed: 2,945 1/min Condition: used (see pictures and type plate) Dodpfet Iwyujx Addocr

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: F21/0023666, Equipment: documentation/manual, Technical Specifications: Maximum load: 20 kg Nominal load: 7 kg Reach: 1000 mm Number of degrees of freedom: 6 Repeatability according to ISO 9283: ± 0.03 mm Pneumatic connection: 2 direct lines between base and forearm 2x solenoid valve 5/2 way bistable (compressed air) Electrical connection on the arm: 17 electrical I/O lines Multibus cable inside the arm: 13 electrical lines, 4 multibus cat5e lines, DIN M12 Standards and degrees of protection: Standard for clean rooms - ISO 14644-1: Level 5 Dsdpfx Adjpd In Dsdscr Protection class (wrist): IP65 (*IP67) Safety: Absolute encoders up to SIL3-PLe class ensuring the highest level of safety. Management and License: CS9 management with VAL3 license Controller power supply: 3x400-480V-50/60Hz Other equipment: Control panel (with 5m cable). This robot not only offers impressive technical parameters, but also the highest safety standards thanks to SIL3-PLe class encoders. With a wide range of applications and precise repeatability, it is ideal for various industrial purposes. For more information or a tour, contact us by email or phone (in English). We are here for your questions and look forward to your interest.

Condition: as good as new (ex-display), Year of construction: 2022, Two-axis positioner for Kuka industrial robots maximum payload 500Kg position repeatability accuracy= 0,1mm overall height: 982mm inclination range: +/- 93 Dedpfxolhr H Hj Addecr rotation range: unlimited installation position: floor Rated welding current (100% duty cycle) = 500A ( 60% duty cycle) = 600A

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10014487, load capacity: 240 kg, arm reach: 2,896 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet and the associated cables. The robots come from a functioning system and have been professionally dismantled. We carry out a functional test and check the robots. If you are interested, we offer the opportunity to demonstrate the functions to ensure that they meet your requirements. We grant a 14-day right of return. Further warranty services are excluded. - Supplement at additional cost - We are pleased to be able to offer you a new function for our robots: The Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop function, a safety gate and a start-stop connection via the Profisafebus. The controller is fully configured and programmed so that you can implement a simple stand-alone solution with a robot and a safety fence. If required, we can also offer you additional support during commissioning. We have an extensive stock of these robots and the prices quoted are package prices. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Dcedpfx Asrlmunjddjr Sale exclusively to traders.

Condition: excellent (used), Year of construction: 2007, load capacity: 5 kg, arm reach: 704 mm, Fanuc LR Mate 200 iC robot (E-29388) with Cell Vision System Country of origin: Japan Year: 2007 Control system: R-30iA MATE Number of axes: 6 Load capacity: 5 kg Reach: 704 mm Repeat accuracy: ±0.02 mm Dcedpfx Asqgck Dsdder Robot weight: 27 kg Camera: Sony XC-56