Industrial robot

Yaskawa YR-MH0005L-C12

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. Gbodpfxsx D I Sms Anzen • Electrical: • Voltage: 354 / 488 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Machine hours (from control): • Power on time: 19,635 h • Cycle start time: 8,564 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 side-mount ATC • Control unit: Haas CNC Control

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm Gsdpfsx Enh Tsx Anzjbn This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. The machine can be inspected under power and test cuts are possible upon request. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle Gbjdpfx Aoyh Hw Ijnzsn • 12-station BMT65 turret • Programmable Tailstock Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 356801, arm reach: 706 mm, We only used the TIG welding robot for 2 months. The machine is in perfect condition. The extraction system was never in operation. The machine enclosure and welding table are included. The “Ready2_pilot” programming and material feed for welding can be retrofitted at any time. Gbsdpfx Aexw R Nnonzsn

Condition: used, Year of construction: 2018, operating hours: 11,685 h, functionality: fully functional, machine/vehicle number: 511125, overall weight: 51 kg, load capacity: 6 kg, arm reach: 700 mm, This is a KUKA KR 6 R700 sixx WP industrial robot Gedpfjufyk Nsx Anzobn Year of manufacture 2018 We are also happy to offer you this robot overhauled! The robot includes the following options: A01_PLC A03_GRP BoardPackage DiagnosticsSafety KrcAutoInstall KUKA.CPC KUKA.NonAdmin LoadDataDetermination NWC Profinet KRC-Nexxt SafeOperation WristMamesOffset

Condition: ready for operation (used), Year of construction: 1980, Power: 300 to Size of bolster: 1.200 x 850 mm Overhang: 400 mm Width of ram: 1.100 mm Opening in bolster: 400 x 250 mm Daylight: 500 mm Frequency: 32 1/min Stroke: 30 - 140 mm Ram adjustment: 105 mm Weight: app. 19.500kg Other - allowed for 2-Hand safe working - euqipped by safety valve Herion Xsz 20 - Motorized grease lubrication - Pneumatic ram balancing cylinders - Motorized ram adjustment - T-slots in ram Gbodpfx Anod A Hbcezsn - Stand alone control panel - bearing of con rod overhault

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm Gbodpfx Anew S Efzezon revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 7232, Welding and cleaning center STUERTZ SE-VSM-B and SE-2AS-CNC Used, year of construction 2000 Database with Gealan, Rehau and Aluplast profiles. There is a function for welding HFL windows. Gjdpfjw Edz Aox Anzsbn Documentation, additional photo and video available. We can carry out installation and commissioning.

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. There are 2 machines available. Price per unit. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Gbsdpjyvvt Sjfx Anzen Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Gjdpfxsytcf Uo Anzsbn Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *