Stäubli TX90 CS8C

Stäubli TX90 CS8C

Condition: excellent (used), Stäubli Type: TX90L Robot / CS8C Controller Six-axis robot with controller The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for a wide range of applications thanks to their compact, slim design. Thanks to three mounting options: floor, wall, and ceiling, the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) enables use in clean rooms or under aggressive environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gear modules Long reach Advantages Perfect component protection. Standard version in clean room class ISO 5. Easy to clean. Hsdpfswbqwcsx Ai Dofg Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance requirements Optimal use of the workspace Technical specifications TYPE TX90L Number of degrees of freedom: 6 Nominal payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options: Floor / Wall / Ceiling Stäubli CS8 CS8C controller Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical specifications: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) RAM 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/Programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm with rear fence Hsdpfx Aioq Rb Irj Djfg

Condition: excellent (used), Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots in the TX90 series for medium payloads offer the highest possible flexibility for many applications thanks to their compact, slim design. Thanks to the three mounting options - floor, wall and ceiling - the six-axis robots are easy to integrate. The completely encapsulated structure (IP 65) enables use in clean rooms or under aggressive environmental conditions. Features Completely encapsulated structure with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gear modules Long range Advantages Perfect protection of the components. Standard version in clean room class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics and speed with reduced maintenance effort Optimal use of the work space Technical data TYPE TX90L Number of degrees of freedom 6 Nominal load capacity 6 kg Maximum load capacity 15 kg Hfsdjvx Tbtopfx Ai Dsg Range 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options floor / wall / ceiling Control Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) RAM 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), language PLC-IEC 61131-3 Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2009, Stäubli t TX90 L with Controller CS8C. (2009) Number of axis: 6 Payload: 5 kg Hodpev Hdk Isfx Ai Dsfg

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: Hjdpfxsw Hrrrj Ai Dofg From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: AAY366, overall weight: 900 kg, Equipment: type plate available, We are selling our EROWA as it is now surplus to requirements. It was previously connected to our DMG65H and functioned perfectly. The robot has been updated to the latest version of the software. Clamping devices can be included by agreement. The machine is currently in storage and has been disconnected by an Erowa technician. All manuals and documentation are available. Interface specification is available. Hfodpjxuh Ddefx Ai Djg

Condition: like new (used), Year of construction: 2017, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: F17/5EWVB1, overall weight: 350 kg, load capacity: 30 kg, arm reach: 1,700 mm, I offer the Stäubli RX160 robot, the option to add a uniVal Drive The robot is in almost new condition, used only 4500 hours motor see. photo. Hfjdpfx Aior Dvd Ij Deg Maximum load 30kg Nominal load 20Kg Reach (between axis 1 and 6) 1710 mm Number of degrees of freedom 6 Repeatability - ISO 9283 ±0.05 mm Stäubli series controller CS8C Weight 248 Kg

Condition: new, Brand new, never used!!! Year of manufacture: 2021 Axes: 6 Max reach: 2701 mm Rated load: 210 kg Max load: ~270 kg Net weight: 1107 kg Hfedpjww Utaefx Ai Dsg Controller: KRC4 Pendant: KUKA SmartPad Model: KUKA KR 210 R2700-2 FLR (QUANTEC-2 Series).

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Hsdpfefzq Stsx Ai Dsfg Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: used, TVM2.1-50-220-300-W1-220-380 TDM1-2-50-300W1-220V TDM1-3-030-300-W1-0 TDM1.2-100-300-W1 TVM2.1--50W1-220V TDM1.2-100-300W1 TDM1.2-100-300-W1-220 TDM1.2-100-300-W1-220 TDM1.2-100-300W1 TDM1.2-100-300-W1 TDM1.2-100-300-W1-220 TDM1.2-100-300W1 TDM1.2-100-300W1 TDM1.2-100-300W1 TDM1.3-100-300-W1 TDM1.2-100-300W1 TDM1.2-100-300W1 TVM2.1-50-220-/300-W1-220/380 TDM1.2-050-300-W1-220/S102 TDM1.2-100-300-W1 TDM1.2-100-300W1S0102 12100-300Wi TDM1.2-30-300W0 TDM1.2-050-300-W1-220 TVM2.1-50-220/300-W1-220/380 TDM1.2-050-W1-SO102 TDM1.2-100-300W1S0102 TDM1.2-100-300-W1-220 TVM-2.1-50W1-220V TDM1.2-050-300-W1 TDM1.2-050-300-W1-000 TVM2.1-1-50W1-220V TDM1.2-100-300W1S0102 TDM1.2-100-300-W1 TDM1.2-100-300-W1-0 TDM1.2-50-300-W1 TDM1.2-100-300W1 TVDI1.3-15.03 TDMI1.2-050-300-WI-000 TDMI1.2-030-300-WO TDMI1.2-050-300-WI TDMI1.2-50-300-WI TDM1.2-30-300-WO-1/93 TDM1.2-30-300-WO TDM1.2-30-300-WO TDM1.2-30-300-WO TDM1.2-030-300-WO TDM1.2-30-300-WO TDM1.2-050-300-WI-000 TDM2.1-030-300-WI-2 Hfsdpsfd Tlmsfx Ai Djg TDM1.2-30-300-WO TDM1.2-30-300-WI TDM1.2-030-300-WI-220 DD503.1-W030-RA02-02-FW KDS1.1-100-300-WI-220 KDS1.1-150-300-WI-220 KDS1.1-050-300-WI-220 KDV3.1-100-220/300-220 KDS1.1-050-300-WI-220 KDS1.1-100-300-WI-220 KDA3.2-150-A00-WI Used Indramat parts Price on request