Used cNC lathes 250-299mm turning diameter for sale (95)

Condition: used, Year of construction: 2008, Mazak QTN-100MSY Year: 2008 X/Y/Z/B: 185/100/455/460 mm Max. turning diameter: 280 mm Bar capacity up to 51 mm diameter Main spindle Speed range: 6000 rpm Main drive power: 11 kW Max. torque: 184 Nm Spindle bore diameter: 61 mm C-axis spindle positioning: 0.001° Second spindle Speed range: 6000 rpm Drive power: 11 kW Max. torque: 89 Nm Njdpfx Aajxn Svdo Dewb Indexing: 0.001° Tool turret Number of tool stations: 12 Driven tools Speed range: 4500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel paths X-axis: 185 mm Y-axis: 100 (+/- 50) mm Z-axis: 455 mm W-axis: 460 mm Toolsetter Parts catcher Chip conveyor, right side Coolant pump Barfeeder interface

Condition: used, Mazak QTN100IIMY CNC lathe, year 2007, in very good condition Nedpfx Aaox Hhkkj Dswb Y-axis C-axis Tailstock

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Nwjdovw Uqaopfx Aa Deb Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: excellent (used), Year of construction: 2012, CNC lathe 2 axes DMC Korea DL22 Fanuc OiTD with Manual Guide and USB port year of manufacture 2012 8-inch chuck Njdpjxyaulofx Aa Djwb Spindle bore 65mm Turning length 400mm 12-position tool turret Tailstock Coolant tank with pump

Condition: excellent (used), Year of construction: 2013, Control Siemens Sinumerik 840D Max. turning diameter: 280 mm Max. bar capacity main spindle: 61 mm Turning length: 490 mm Spindle speed main/sub spindle: 4700 / 6000 rpm Nwedpfxsyc Hzrs Aa Dob 12-position turret with driven tools C-axis Y-axis Parts catcher Workpiece ejector Chip conveyor Various tool holders

Condition: good (used), Year of construction: 2005, turning length: 450 mm, travel distance X-axis: 135 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 450 mm, C-Axis rapid traverve 400 Min Turret indecing time 0,2 sec for 1 station Heavy duty cutting (depth cut 6mm) 162.7 mL/Min LNS Bar feeder new 2017 Large package tooling driven / live tools 8 axis controlled with 2 spindles and turrets Max. turning Ø: 250mm X-Axis: 135mm Y-Axis: 40+40 = 80mm Z-Axis: 450mm B Axis: 510° Njdpfx Aaoydcvzj Djwb Spindle bore: 49mm Speedrange: 6000Rpm Spindle power: 30kW Subspindle speeds: 6000Rpm Subspindle bore: 49mm ATC / revolver: 12 Speed live tools: 6000Rpm Positions lower revolver:12 Speed live tools: 6000Rpm Length: 2800mm Width: 2000mm Height: 2000mm Weight: 5000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: SINUMERIK 828D, _____ Description: Year of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mm Turning length : 243 mm Work area max. turning diameter:288mm max. machining length:243mm X-axis:175mm Z-axis:350mm Main spindle Chuck diameter:210mm Max. bar diameter:67mm Spindle bore diameter:76mm Drive power:10.5/20 kW max. torque:213 NM max. speed:4,500 rpm Tailstock Quill diameter:65mm Quill stroke:80mm Axial force:4,312 N Center point adapter:MT4 Nodjyavz Ajpfx Aa Dewb Tool turret Number of tool stations:12 Tool holder:BMT45 Powered tools:Yes Max. speed:5,000 rpm

Condition: used, Year of construction: 2005, turning diameter 290 mm turning length 300 mm Nodpfx Aoyb S Ihea Djwb control Heidenhain greates pass round over bed 380 mm total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Nwodoyamflopfx Aa Djb Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Hyundai lathe 3 axes X, Z, C Type HIT 30M Siemens CNC With driven tools Nwodpeydp E Nofx Aa Djb

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Hyundai lathe, 2 axes Type HIT 18S Siemens CNC Nwodpfsydp Drsx Aa Dob

Condition: used, Year of construction: 2006, total height: 1,750 mm, total length: 2,790 mm, total width: 1,570 mm, Empty weight: 4.300 kg Price: On request - Year: 2006 - Documentation available: Yes - CE certificate present: No - Serial number: GN08201038G - Drive system: CNC - Control system brand: Fanuc - Control system type: 0i-Mate TO - Power [kW]: 15.0 - Swing over bed [mm]: 250 - Distance between centres [mm]: 460 - Spindle bore [mm]: 62 - Max. spindle speed [rpm]: 4500 - Options: Removable bed - Swing over removable bed [mm]: 460 - Transport dimensions: 2790mm x 1570mm x 1750mm (l x w x h) - Transport weight [kg]: 4300kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Nwodswfpaqspfx Aa Dob VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2017, operating hours: 10,963 h, functionality: fully functional, machine/vehicle number: ML0335-000100, turning diameter over cross slide: 400 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 12,600 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,693 mm, total length: 2,570 mm, total width: 1,595 mm, workpiece weight (max.): 300 kg, overall weight: 3,400 kg, bar passage: 67 mm, Equipment: documentation/manual, rotational speed infinitely variable, very stable roller-guided 2-axis CNC lathe with tailstock, suitable for both series production and single-part machining; Siemens 828 D control; interface for bar machining, parts catcher and ejector for automated processing; tailstock; chip conveyor; various tool holders; tool measuring arm. Nwsdjydbqqjpfx Aa Dob

Condition: used, Year of construction: 2000, control Fanuc 21i turning length 600 mm swing diameter 280 mm turning diameter over bed 520 mm turning dia. over slide 255 mm centre distance 1.300 mm x-axis 160 mm z-axis 600 mm spindle bore 65 mm number of tool places 10 Pos. spindle tunring speed 3.500 U/min spindle drive 12 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Nwodpfjx Ti Dlsx Aa Dob Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 246, turning length: 900 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 400 mm, total height: 2,700 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 7,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8H, number of slots in tool magazine: 12, TRAUB TNA 400 CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 36 kW - Rated current: 70 A - Includes a tailstock and a HAINBUCH chuck, also equipped with a chip conveyor, TOOL EYE, and an additional chuck by FORKHARDT, diameter: 250 mm Nsdpfx Aajx Tzx Ij Dewb Note: The item must be picked up, bindingly, between 18th and 26th February 2026 on a date to be arranged. FCA D-78087 Mönchweiler - loaded onto truck

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Nwodpjw Ebngefx Aa Dob Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: good (used), Year of construction: 2013, functionality: fully functional, spindle speed (min.): 4,000 rpm, travel distance Z-axis: 500 mm, Year of manufacture: 2012 Chuck diameter: 10" Number of axes: 2 Turning length: 500 mm Swing diameter: 400 mm Nwjdpfx Ajx Nmm Aja Dob Spindle speed (RPM): 4,000 Processable materials: Steel, Aluminium, Titanium, graphite, Copper, Invar, Composite, Delrin, Peek

Year of construction: 2012, condition: excellent (used), Type of CNC HURCO ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Max workpiece weight kg Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Nwjdpfxjpiay Sj Aa Djb Tailstock

Condition: used, Year of construction: 1995, turning diameter 800 mm Nwjdpjwizm Rjfx Aa Djb turning length 2700 mm control Monforts MTC K

Condition: used, Year of construction: 2014, Technical details: turning diameter: 256 mm turning length: 455 mm swing diameter over slide rest: 260 mm travel -x axis: 198 mm travel -z axis: 508 mm turning speed range - main spindle: 4800 1/min power capacity - main spindel: 18 / 11 kW C-Axis: 0,01 ° turret (x-stations): 12 x VDI 30 Pos rapid power traverse in X-and Z direction: 19 / 24 m/min Number of driven tools: 12 Pos tool taper: VDI 30 Spindle speed driven tools: 5000 min -1 spindle hollow: 52 mm power capacity - driven tools: 4,4 kW total power requirement: 28 kVA weight of the machine ca.: 4.500 kg dimensions of the machine ca.: 2,9 x 2,3 x 2,2 m CNC lathe with tailstock, Nsdpfx Asx Th Amja Dewb chipconveyor, hollow clamping cylinder, 3-jaw-chuck AUTO STRONG N 208, dia. 200mm, DXF, tooleye, Ultipockets, Synchronous threading, 3D Graphic, barloader ILS-BREUNING MUK 7012-III, Bj. 2017, accessories: incl. 2 pcs. live tools, incl. 34 pcs standard toolholders, hour meter: approx. 9.500h "machine on", approx. 2.000h "spindle on", approx. 300h "live tools on" *

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Nakamura Tome WT 250 CNC Lathe (2008) Manufacturer: Nakamura Tome Model: WT 250 CNC Lathe Year of manufacture: 2008 Condition: used, good, and currently under power in production Control: Fanuc 18i 4 axes: X, Y, C, Y 2x spindle 2x turret (equipped) Turning diameter: 250 mm Turning length: 555 mm Main spindle speeds: 50–4,500 rpm Sub spindle speeds: 5,000 rpm Nwjdsx Tir Njpfx Aa Deb Turrets 1+2: 24 stations, each with 12 driven positions Gantry loader GR 203 Band filter system Chip conveyor Documentation Tools Accessories

Condition: good (used), Year of construction: 2002, turning length: 200 mm, turning diameter: 300 mm, spindle bore: 40 mm, spindle speed (max.): 4,000 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The Okuma LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! Driven tool, C-axis machine. It can be viewed in operation. Main parameters: Nodpfxex Uzyuo Aa Dowb -Control: OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300 mm -Maximum length: 200 mm -Spindle diameter: 40 mm -Turret: 12 positions

Condition: used, Year of construction: 1999, turning diameter 270 mm turning length 630 mm control SIN840D swing over bed 400 mm swing diameter over slide rest 220 mm Nsdpfox Avp Rex Aa Dowb longitudinal slide -travel 745 mm cross slide - travel 200 mm turning speeds 10 - 4.000 U/min power capacity at 100 % load 15,00 kW spindle head DIN 55026 - Size 6 spindle bore 62 mm chucking diameter max. 315 mm feed x-axis 1 - 12.000 mm/min rapid traverse X-axis 12,00 m/min Feed z- axis 1 - 20.000 mm / min. rapid traverse Z-axis 20,00 m/min tailstock quill taper MT 3 quill stroke 112 mm quill pressure 10,00 kN tool taper DIN 69880 Ø 30 mm Tool drive speed max. 4.000 1/min total power requirement 37,00 kW weight of the machine ca. 4,00 t dimensions of the machine ca. 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool holders.

Condition: new, Year of construction: 2024, functionality: fully functional, For sale is a new machine for cutting hoses made of plastic or textile (Cutex TW-69TUB). - Cutex TW-69TUB base unit - Hardened upper and lower blades - Cutting length adjustable in 0.1 mm increments - Transport via conveyor belt - Conveyor belt height and contact pressure adjustable - Mounted on a frame Optional (for an additional charge): A pre-feed device is available, which pulls the hose off the reel and feeds it to the cutting machine without tension. Also available as an option is a second set of blades (upper and lower blades). Nwodpfx Aasyay Duj Deb The machine is new and has never been used in production. It can be inspected and tested on site.

Condition: used, Year of construction: 1986, functionality: limited functionality, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, type of input current: three-phase, overall weight: 2,300 kg, swing diameter over bed slide: 340 mm, bar passage: 40 mm, swing diameter over top slide: 158 mm, bar diameter (max.): 43 mm, Equipment: documentation/manual, For sale is a CNC lathe EMCOturn 340 TC equipped with a Siemens Sinumerik 810 T control system. On-site inspection is expressly encouraged. We would be happy to demonstrate the machine in operation for you. The machine comes from ongoing production and is fully functional except for the tailstock (which is jammed). We have three main types of tool holders for the EMCO, all following the VDI 30 system: Nodpfsybb Ecex Aa Djwb - Boring bar holders in the following sizes: 2x10mm, 1x16mm, 1x20mm, 3x25mm, 1x32mm - Turning tool holders 20mm x 20mm: 5 pcs - Collet holders: 8 pcs with various collets supplied Electrical specifications: Voltage: 3×380/220 V Frequency: 50 Hz Current: 35 A Serial number: R3086 06 014 S If you have any questions or require further information, please feel free to send us a message or call us.