STAMA MC 526

STAMA MC 526

Condition: ready for operation (used), Year of construction: 2007, operating hours: 82,265 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, table width: 600 mm, table length: 1,400 mm, table load: 1,500 kg, spindle speed (max.): 10,500 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 42, tool weight: 5,000 g, number of axes: 3, This STAMA MC526 was manufactured in 2007. It features a 40-tool magazine, NC swivel table, chip conveyor, belt filter system, and an internal coolant supply via the spindle. Additional amenities include a high-pressure system, Renishaw probe, and an extraction system. Consider the opportunity to buy this STAMA MC526 vertical machining centre. Contact us for more information. Additional information • Feed Force X/Y-Axis: 4,000 N • Feed Force Z-Axis: 8,000 N • Rapid Traverse X/Y/Z: 60 m/min • Feed Rate X/Y/Z: 1 – 10,000 mm/min • Axis Dynamics: X = 5 m/s² • Axis Dynamics: Y = 8 m/s² • Axis Dynamics: Z = 12 m/s² • Distance Table to Spindle Nose: 350 – 710 mm • Tool Clamping Force: 7,000 N • Spindle Diameter: 65 mm Predpfx Ajx S Skxjlwsb • Constant Torque Range: Up to 3,000 rpm • Torque at 100% Duty Cycle: 30 Nm • Torque at 20% Duty Cycle: 59 Nm • Power Above 3,000 rpm at 100% Duty Cycle: 9.5 kW • Power Above 3,000 rpm at 20% Duty Cycle: 18.5 kW • Maximum Tool Diameter (All Positions Occupied): 88 mm • Maximum Tool Diameter (Adjacent Positions Free): 125 mm • Pull Stud Standard: DIN 69872-19 • Tool Change Time (Chip-to-Chip): Approx. 2.4 s • Tool Offset Functions: Length and Radius Compensation • Tool Data Input: Via Input Station or CNC Screen Menu • Positioning Resolution: 0.001 mm • Machine Prepared For: Fixed Table with T-Slots and Location Holes • Machine Prepared For: NC Rotary Table with Tailstock • Tool Holder Type: SK40 DIN 69871 A/B • Siemens 840D SolutionLine • Chip conveyor optional • Belt filter system • Internal coolant supply via spindle • High pressure capability • Renishaw probe • Extraction system • Connection Voltage: 400 V • Phase: 3~ • Frequency: 50 Hz • Nominal Current: 34 A • Additional Fuse: 3 x 50 A • Minimum Connection Cross Section: 25 mm² • CE Marking: Yes Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, diameter: 1.5 - 160 mm stroke: 400 mm Psdowgm Saopfx Alwerb weight: 800 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Pressure: 225 t Bending length: 4050 mm Control: DA 69 TW Pedpfoyz S Ngex Alworb Oil capacity: 400 l Total power requirement: 17 kW Machine weight approx.: 18,100 kg Dimensions: 5700 x 2610 x 3300 mm

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm X-Axis 260 mm Z-Axis 1350 mm FANUC i Series Swarf conveyour Prjdpsxw Ilmefx Alwsb Renishaw Toolsetter

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm Predpfxewwl I Is Alweb min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer Pjdpfxjvtrc Ss Alworb 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump Prodpeycvaqjfx Alwsb - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Prsdpfxjwbgine Alwsb Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light Prsdsxur E Sspfx Alwsb - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, Prsdpfx Alewix Hhewsb *