Drive axle

Still EFG 1.0/5002

Condition: excellent (used), 200m3 stainless steel tanks Number of items: 3 180m3 stainless steel tanks The diameter is 4.70m Gtedjfngl Njpfx Af Nst Height without legs is 14m 4,1mm wall thickness 5,1 bottom thickness We offer transport with our specialized trailer to every region of Europe!

Condition: used, Year of construction: 1995, operating hours: 1,589 h, machine/vehicle number: 558B, Equipment: all wheel drive, - Wunderschoner Liebherr shovel loader is in a really good condition directly from the military (Swiss-Army) Well maintained and cared for, - The 508 is a really solidly built wheel loader, just right quality for the military. - Is also no source of oil, makes NO oil stains, is almost as good as new - The cab is glazed all around for a good all-round view! ! - The Liebherr L508 is equipped with: Quick change device 0,8m? Bucket, Pallet forks with log push, Additional hydraulic connections for additional equipment, All-wheel drive, Articulated steering 40 degrees very maneuverable with a small turning circle - Tire size 12.5 R 20 off-road profile, tires are foamed (you can not drive flat) Snow chains are also included, Hydro drive, Highest speed 25 Km / H, Displacement 2732 cm? 4 cylinder series Deutz BF4L1011 T with Turb,24Volt power supply, - TUV can be made NEW on request for an extra charge !!! - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Call 0049 (0)2248 Greetings, your Philipp from the Hanfbach valley Gtodpfx Ajqx S Alof Njt

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Gsdpfx Asxgdfbjf Njtt Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Gedpogy E Dpefx Af Njtt Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies Gtedpfxemxkdpo Af Net facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Godpfx Afjvryhyj Nett Battenfeld V125

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm Gtsdpjdmbrxjfx Af Net centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm total power requirement:18 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

Year of construction: 2005, condition: used, Item: AV-1832-Vertical-Tank140m3 Vertical Silos Tanks capacity 140.000 L Exterior dimensions: Dia Ø 3500 mm Total H 16750 mm. Vertical stainless steel tanks - 6 pcs. Standing on 4 legs. Klóper bottom with 4" outlet. Gtodeh A H E Eopfx Af Njt Klóper top with ventilation. AISI 304

Year of construction: 2010, condition: reconditioned (used), Technical characteristics SC 1400 CC:  Plate diameter 1250 mm  Maximum turning diameter 1400 mm  The maximum height of the part under the crossbar 1000 mm  Maximum weight of the part on the plate 6000 daN  Stroke of the right vertical slide 800 mm  Side slide stroke 650 mm  Plate rotation speed 5-250 rpm  Range of working advances 0.05-5 mm/rot  Machine weight 15500 daN  Machine dimensions (L x W x H) 4060 x 4450 x 3900 mm The vertical lathe SC 1400 CC - SIEMENS, is built with a monobloc hammer made of special alloyed cast iron, type MECHANITE. The mobile crossbar has rectified horizontal guides. The lathe is equipped with a vertical support with a revolver head for 5 tool holders and a side support. The main drive is provided by a 3-speed gearbox (transmission ratios 1:9, 1:3, 1:1) continuously adjustable, which is driven by a 75 KW electric motor and a SIMOREG electronic variator from SIEMENS. Gtedpfoihczyjx Af Net The work and fast advances of the vertical support on the X and Z axes are realized by transmission with ball screws from STAR REXROTH and electromagnetic couplings TELCOMEC ITALIA. The hydraulic unit is mounted on the drum and provides the following functions: - Automatic gear change (1:1; 1:3; 1:9) - automatic lubrication of the gearbox - dynamic balancing of the vertical support - locking and unlocking of the mobile crossbar on the baton guides The hydraulic components of the power plant are imported from ATOS ITALIA. The centralized lubrication systems from the crossbar and work supports are made with AZETA ITALIA components. The stroke limitation and safety systems are made with microswitch blocks from EUCHNER - GERMANY, which perform the following functions: - stopping at a fixed rate with confirmation in the rate display - protection against collisions and damage limits For turning flat surfaces at constant speed, the electrical equipment is provided with the function V = K of cutting at constant speed. The electrical panel and the mobile control desk are made with SIEMENS, EATON, SCHNEIDER components. The machine is automated with a programmable SIMATIC PLC S 7-300 from SIEMENS. Display of dimensions with measuring rulers for the vertical support and the lateral support for 2 + 2 axes.

Condition: ready for operation (used), A Romi CNC cycle lathe is available. Center height: 215mm, center width: 1000mm, turning diameter over bed/face slide: 430mm/204mm, spindle bore: 53mm, rapid traverse X/Z: 7.5m/min / 10m/min, spindle speed: 4000rpm, main spindle motor power: 7.5kW, tool positions: 8, machine dimensions X/Y/Z: approx. 2800mm/1300mm/2000mm, weight: approx. 3000kg, control: GE Fanuc series 21i-TB. Documentation available. On-site inspection is possible. Gtedpou H H Hvefx Af Net