Round industrial tent

SUIHE

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Ndedpfx Aajh Ellzs Aed Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: used, Year of construction: 1986, operating hours: 3,710 h, Equipment: all wheel drive, SCHAEFF MINI EXCAVATOR ZRH 16 QUICK CHANGER READY FOR USE ----VEHICLE EQUIPMENT * TYPE: ZRH 16 * 3.3 T PERMISSIBLE TOTAL WEIGHT * 1986 YEAR OF CONSTRUCTION * QUICK CHANGER * READY FOR USE IMMEDIATELY * NO SHOVEL AVAILABLE Njdpfx Asv Hvuxea Asdd * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ ---EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATE AND 17 - 21 DAYS AUSTRIAN LICENSE PLATE EURO 1 VEHICLE RESERVATIONS PLEASE ONLY USE THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries a deposit of at least ¤ 500.00 / ¤ 1,000.00 will be charged (For sales to the EU and third countries will be levied deposit/guarentee of at least ¤ 500.00 / ¤ 1000.00) Subject to changes, errors and advance sales! You can find more vehicles on our homepage: Sales are made exclusively in accordance with our terms and conditions - see homepage Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: good (used), Year of construction: 1975, Martin Miniline 616 - Vacuum feeders - hhs-Gluesystem with Gluecontrollsystem - Max.Speed: 24,000 Sh/h - Max.Size: 600x1600 mm - Year 1975/1991 - 2 Color Flexo - Slotter - Rotary die cutting - Folding gluing Nedjq Nf D Hopfx Aa Asdd - Counter Ejector, Year 1991

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Nsdpfx Aasg S Ui Ao Aodd

Condition: used, machine/vehicle number: 8170126, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781Kartonagenhefter / Carton Stitcher Typ / Model 781/1L75FR Serial-No. 8170126 Armlänge / Arm length 75cm Fußpedal / Foot pedal Njdpfjiiilqex Aa Aodd Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. Nodpfx Ask Hz Nqsa Aodd With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Nodpfxjdf Ufps Aa Aedd Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Ndodpfxjftdv Uj Aa Aed Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 10,000 mm, total length: 9,000 mm, total height: 4,500 mm, Equipment: roof tent, NEW EQUIPMENT Our various sizes – please let us know which one you require: 6m Widths → 6.1m x 6.1m x 3.66m → from €2,599 → 6.1m x 9.15m x 3.66m → from €2,999 → 6.1m x 12m x 3.66m → from €4,499 → 6.1m x 18m x 3.66m → from €4,520 9m Widths (Arch Spacing 1m or 2m) → 9.15m x 10m x 4.5m → from €3,600 → 9.15m x 12m x 4.5m → from €4,149 → 9.15m x 16m x 4.5m → from €4,999 → 9.15m x 20m x 4.5m → from €6,799 → 9.15m x 26m x 4.5m → from €8,399 12m Widths (Arch Spacing 1.5m or 3m) → 12.2m x 12m x 6.1m → from €12,399 → 12.2m x 21m x 6.1m → from €17,999 15m Widths (Arch Spacing 1.5m or 3m) → 15.25m x 12m x 6.1m → from €14,899 → 15.25m x 21m x 6.1m → from €22,199 ☆ FINANCING OR LEASING AVAILABLE from €69.89 per month ☆ CERTIFIED PRODUCTS ☆ TRANSPARENT OFFERS ☆ INCLUDES GERMAN STRUCTURAL ANALYSIS ☆ INSTALLATION AVAILABLE ☆ OPTIONAL FIRE OR STORM INSURANCE ☑️ Genuine 750 g/m² PVC tarpaulin → more durable than standard products on the market ☑️ Extra sturdy and tear-resistant thanks to fabric reinforcement ☑️ High UV resistance ☑️ 100% waterproof ☑️ Extra strong, galvanized tubing for maximum stability ☑️ Suitable for year-round use ☑️ German customer service and support during purchase and assembly ☑️ Snow load: up to 130kg/m² (arch spacing 1m) and 70kg/m² (2m) ☑️ Wind load: up to wind zone 4 (1m) and up to wind zone 2 (2m) ☑️ Includes ground anchors, concrete anchors and all other small parts ☑️ Spare parts guaranteed ☑️ 5-year warranty on properly installed PVC tarpaulin Nsdpfxoudwfnj Aa Asdd ☑️ 10-year warranty against corrosion of steel frame ► Most models available for immediate delivery ► Colours: green or white ► Includes German structural analysis ► Gates at both gable ends ☏ Call us! We are happy to provide you with a non-binding offer with best price guarantee. THE IDEAL ALTERNATIVE TO TRADITIONAL CONSTRUCTIONS Optimal protection against wind, sun, rain, hail, and snow! ☑️ Mostly permit-free (unlike wooden, steel or sheet metal buildings) ☑️ No foundations required ☑️ High stability and safety (certified by German engineering office) ☑️ Decades of use: high quality, warranty, and spare part availability ☑️ Robust, corrosion-free framework ☑️ Various shapes, colours, and sizes VERSATILE APPLICATIONS ☑️ For agriculture, forestry, industry, commercial, and private use ☑️ Storage space for goods, materials, or machinery ☑️ Garage / carport for trucks, motorhomes, boats or yachts ☑️ Workshop within the lightweight hall ☑️ Construction site roofing ☑️ Shelter or stable for livestock ☑️ Barn for straw, hay, and wood ☑️ Greenhouse for plants ! Prices include structural analysis ! Delivery and installation available *Images similar • Prices & colours may vary • All prices subject to change • Please request a non-binding quote for an exact price • Available while stocks last • Non-binding offer

Condition: excellent (used), SIMPLACUTTER (CAUHE) - 1080x770 Machine little used, in very good condition Equipment: - pneumatic clutch and brake - one frame for quick die mounting + two additional frames - 3 modes of operation: single, continuous, with time delay on opening - central lubrication - additional safety guards - working tools Njdpfx Ast Twqwoa Asdd - hard plate for table + additional