Clinching pliers with servo drive for robots

TOX TZ 05.656377

Condition: new, Year of construction: 2024, New Aurepa ADR Trailer tank nitrogen, oxygen, argon, gas, cryogenics CRYOBASE tanker New trailer: Year of manufacture of trailer: 2024, made in Germany All necessary documents are available Gujdpot R R Uqofx Albec Used tank: Working pressure: 3.85 bar Capacity: 2000 L Delivery is possible. We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen, carbon dioxide, hydrogen, methane We would be happy to provide you with a quote or more information.

Condition: new, Welding rotary tables increase work flexibility, productivity and quality. Rotary tables also support the welder at work and thus guarantee a safe working environment and better working ergonomics. The main advantage of PEMA rotary tables is that the workpieces can always be set in the best possible welding position. This can increase welding productivity by up to 70 %. 50 years of productive and high quality welding - for half a century we have been designing and manufacturing welding rotary tables for demanding and heavy workpieces. Pemamek welding rotary tables are a combination of modern design and reliable, efficient technology and can be easily integrated with any other PEMA solution. Each of our welding rotary tables is designed in-house and manufactured with high quality components. Guedpsg Urz Hsfx Alboc We have the PEMA representation for Southern Germany. We still have some old generation APS rotary tables in stock. The new generation APSI are already in stock.

Condition: new, 40000 kg length 8000 mm width 3000 mm height 900 mm lenkbar lenkbar size of tyres 540 / 300 2-fach mm dimensions 9,9 x 3,0 x 0,9 m Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance Godpfx Aefrzwfolbouc - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,444 h, load capacity: 1,000 kg, lifting height: 2,700 mm, fuel type: electric, mast type: duplex, construction height: 1,850 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Load centre: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Good Front tyre type: Polyurethane Gujdpfx Alovtu A Uobjc Rear tyre type: Polyurethane Battery voltage: 24V Battery type: Lithium-ion Battery year of manufacture: 2019 Description: Integrated charger, foldable operator platform

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Gujdpfxjtu Hy Es Albsc Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: good (used), Year of construction: 2017, conveyor belt length: 7,100 mm, conveyor belt width: 2,500 mm, Double steering Wheel diameter Platform size 7100 x 2500 mm Inspection valid 11.2025 Godpowq N Sdefx Albjuc Length:7100mm Width:2500mm Height:900mm

Condition: used, Year of construction: 2010, functionality: fully functional, Wagner Powder painting equipment for sale! Powder coating device, year 2010 consisting of: Booth: Prima Cube 16000 Powder supply: Powder Center Powder recovery: Cyclon Filter 16000 Movement generator: KHG 350 Production process configurations INCLUDING: I. Presumes Maximum size of parts: LxWxH=2600x400x1850 mm II. Equipment Technological Conveyor automatic speed V=1.2 mtrs/min. Speed regulation between 0.5-2.5 mtrs/min 1. Pretreatment Stand MNA-3-LPG, total size 16,7 mtrs Enter size L=2,5 mtrs a. Washing, degreasing and phosphating; L=3,6 mtrs -number of spray frames – 10 -number of nozzles in frame – 18 -number of nozzles in total – 180 -delivery of the pump – 162 m3/h -power of the pump – 15 kW -vessel 4 m3 for active liquid -inner heat exchanger with LPG burner – 160 kW -temperature 500C -mechanical oil separator - solution filter -the dosing system, membrane pump with regulator -washing time – 3 min b. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec c. First rinsing; L= 1,2 mtrs -number of spray frames – 4 -number of nozzles in frame – 18 -number of nozzles in total – 64 -delivery of pump – 38 m3/h -power of the pump – 3 kW Godpfx Aloww Adtebsuc -vessel 1,5 m3 for water -first rinsing time – 1 min c. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec d. Fine rinsing; L= 1,28 mtrs -number of spray frames – 3 -number of nozzles in frame – 18 -number of nozzles in total – 54 -delivery of pump – 33 m3/h -vessel 1,5 m3 for water -power of the pump – 3 kW -one extra spray frame -number of nozzles in frame – 18 -fine rinsing time – 1 min e. Dripping zone L= 2 mtrs -time of dripping – 1 min 40 sec Three openings to connect to exhaust system with three ventilators Operating space made of stainless steel. Pipes made of PVC or S/S. 1 unit 2. Automatic Dryer after water AST-1-KLPG: - operating space dimensions LxWxH=7000x3000x2800 - air curtains each side to avoid heat losses - one indirect heat exchanger heated with liquid petrol gas to produce 200 kW of rated power - three blowers 6000 m3/h of air delivery - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - drying time 10 min 1 unit 3. Automatic Curing Oven APT-2-KLPG for curing powder paints - operating space dimensions LxWxH=10200x3600x2800 - air curtains on one side to avoid heat losses - two indirect heat exchangers heated with liquid petrol gas to produce 300 kW of rated power, of each - eight circulation blowers, capacity of each 6 000 m3/h - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - curing time 25 min 1 unit 4. An overhead rail conveying system ATR-ADAX, for the paint shop including the following: • straight track with hangers L=400 mm 146 mtrs • drive station 2 pc • tension station 1 pc • chain lubrication station 1 pc • drawing of the track supporting structure 1 set

Year of construction: 2015, condition: refurbished (used), DCB Half gantry crane consisting of: 2 pcs 16 ton hoists. 2 support legs. The following accessories are included: 1 remote control with charger. 2 pcs weight display. Max hoist height: 12,4 meters. Lifting speed: 0.11-5.6. Classification: M5. Range: 21,792. Dimension crane guide rail: 80x60. Functional. In operation until week 12 2021. Dismantled week 12 2021. All annual inspections complied. The following accessories are included: crane folder with original documents, service reports, overview of ongoing maintenance. The following accessories are not included: Running rails + power rails. Master data Model and type 2x16 T MAX 22 T Chassis No. Unknown Year Estimated 2015 Gusdjhk I H Depfx Albsc Max load KG 2x16 T MAX 22 T Weight KG 20,640 excl. legs. Transport can be arranged. Call or write to make an appointment for viewing. Client sale, Location: DK-7600 Struer.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, load capacity: 1,500 kg, The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Positioner with load capacities of up to 1,500 kg. Torque 900 Nm Gujdpfxevlgzao Alboc Handwheel with handle Ø 315 mm U-angle compatibility System 28 Max. length of U-angle 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm D - Width of base plate 600 mm E - Length of base plate 600 mm Price does not include 3D accessories. Prices 3-D accessories, heavy cast parts, wall thickness 28mm, everything processed, special prices New: original angle 28 U-shape 500mm x 200mm x 200mm (surcharge 500.-€) or 2000mm x 200mm x 200mm (surcharge approx. 1000.-€) or 2400mm x 200mm x 200mm (surcharge 1300.-€) or with table top 28 hole, 2000mm x 1000mm x 200mm (surcharge 2000.-€) several positioners are available

Operating hours: 12,000 h, condition: good (used), functionality: fully functional, Raster press punching line which includes: 1) Dimeco Alipresse type 2330DF unwinder with SV tracking and speed change system. Guodpfx Aloryu Taobjc 2) Dimeco Alipresse type 1645 powered straightener with SV tracking and speed change system. 3) Raster eccentric press Type HR 60 SL-4 S with soundproof enclosure . Parameters in the photos. 4) Documentation.