Used Fmz 5000 for sale (2,199)

Condition: excellent (used), Year of construction: 2009, Mobile coil trolley FORSTNER AG 5000 b2mf 1500 Maximum roll width 1500 mm Load capacity 5000 kg Inner diameter 360 - 630 mm Outer diameter 1100 mm With 4-arm spindle Double bearing decoiler with handbrake and steel wheels for movement Rcedpfxomv Hv Aj Aireh

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Rcodpfoz Ii A Sox Airoh Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: good (used), Year of construction: 2008, operating hours: 54,682 h, functionality: limited functionality, machine/vehicle number: 211934, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, feed length X-axis: 730 mm, feed length Y-axis: 730 mm, feed length Z-axis: 740 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 57 kVA, controller manufacturer: Mazatrol, controller model: Mazatrol Matrix Nexus, workpiece length (max.): 800 mm, workpiece width (max.): 800 mm, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table height: 1,100 mm, table length: 500 mm, table load: 700 kg, rotary table diameter: 500 mm, rotational speed (min.): 35 rpm, rotational speed (max.): 18,000 rpm, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 25,876 h, coolant supply: 8 bar, distance table to spindle center: 830 mm, distance table center to spindle nose: 810 mm, spindle motor power: 25,000 W, spindle mount: MK 1, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, mount diameter: 100 mm, input voltage: 480 V, Equipment: chip conveyor, documentation/manual, We are selling a used Mazak HCN Nexus 5000 machining center, manufactured in 2008, with a dual-pallet changer. This is a well-maintained machine from its first owner, and it can be inspected while powered on. Rcodpfxj Agnq Hj Airsh Photos and a technical description can be found in the attachment.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Listing Title JMD Superbinder Challenger-5000 Perfect Binding Line with Supertrimmer-100 Three-Knife Trimmer (2013) Key Technical Data Category: Post-press / Bookbinding machinery / Perfect Binding Line Manufacturer: JMD Machinery Corporation Limited (Shenzhen, China) Binder Model: SUPERBINDER CHALLENGER-5000 Serial Number: 0Y25114 Date of Manufacture: March 2013 Three-Knife Trimmer Rjdpfxs Af Hf So Airoch Model: SUPERTRIMMER-100 (In-line) Total Power: 55 kW Power Supply: 3-Phase / 380 V Net Weight: 5,800 kg Machine Dimensions: 10,300 × 1,900 × 1,410 mm Certification: CE compliant Condition: Very good, fully operational, installed in production, and available for running demonstration System Configuration & Features JMD Challenger-5000 Perfect Binder: Automated block feeding and high-precision spine preparation station with milling and notching tools. Hot-melt adhesive system with dual application units for spine gluing and side gluing. Automatic cover feeder equipped with scoring and creasing mechanisms. Integrated waste paper chip extraction and bag filtration system. Cooling & Conveying Section:Extended conveyor belt setup ensuring gradual cooling and adhesive curing prior to trimming. Automatic Three-Knife Trimmer:SUPERTRIMMER-100 synchronized in-line unit for automated three-side final book trimming.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Pitney Bowes Relay 5000” enveloping machine Item for sale: 1 x Pitney Bowes Relay 5000 Rodpfx Aioz Ixf Neroch Meter readings: Total: Approx. 226,280 pages Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Rjdpfx Ao Aaw Uteiroch Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, TRUMPF TruPunch 5000 S10 with Siemens SINUMERIK 840D control delivers 220 kN punching force across a 2.500 x 1.250 mm work area for sheet up to 8 mm thick, backed by a 21-station tool magazine and multi-tool holder for several punches in one station. Up to 1.400 strokes/min, thread forming function, active die with programmable lift, and a complete set of punching tools with trolley included. CNC CONTROL Controller: Siemens SINUMERIK 840D PUNCHING Punching force kN: 220 Max. sheet thickness mm: 8 Hold-down force kN (max. / progr.): 20 / 4,5–20 Max. workpiece weight kg: 200 Stroke rate 1/min (punching / marking): 1.400 / 2.800 C-axis speed (tool rotation) rpm: 330 Active die force kN: 220 Power consumption (base machine) kW: 12,2 TOOL MAGAZINE / CLAMPS Tool stations (turret / linear magazine): 21 Sheet clamps (standard / max.): 3 / 4 Tool change time s (standard / multi tool): < 3 / 0,7 AXES / WORK AREA Work area X x Y mm (without repositioning): 2.500 x 1.250 Rapid traverse X / Y m/min: 100 / 60 Simultaneous rapid traverse (X+Y) m/min: 116 Acceleration X / Y m/s2: 20 / 10 MACHINE RUNNING TIMES Under power hours: 21.316 EQUIPMENT & OPTIONS Multi-tool holder (several punches in one station) Thread forming (tapping) function Active die (programmable die lift) Sheet lubrication from below Sensor zero stop Parts flap for parts up to 500 x 500 mm Siemens SINUMERIK 840D control with TRUMPF user interface TRUMPF SheetMaster automatic loading and unloading unit (2012) Sheet fanning package with sheet separation nozzle on the SheetMaster Rcsds Afz Tqepfx Aireh GripMaster unloading unit for skeletons and large parts

Condition: like new (used), Year of construction: 2019, functionality: fully functional, HORIZONTAL MACHINING CENTER MAZAK HCN 5000 cnc Smooth G MACHINE COMPLETE WITH A 6-STATION PALLETECH SYSTEM AND A LOADING/UNLOADING UNIT RENISHAW OMP60 Control unit: SMOOTH G X-axis: 730 mm Y-axis: 730 mm Z-axis: 800 mm Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface with threaded holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm Spindle connection: ISO 40 Torque (continuous / 10 min): 168 NM Number of tools: 120 Rsdpfx Aijz Iw Ezorjch Pressure: 15 bar, preparation: 70 bar PALLET size: 500x500

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2D1-1116, type of input current: three-phase, spindle speed (max.): 3,000 rpm, total height: 1,905 mm, total width: 1,626 mm, total length: 1,219 mm, feed length Z-axis: 170 mm, hone diameter: 51 mm, overall weight: 850 kg, input voltage: 400 V, stroke length: 170 mm, rotational speed (min.): 3,000 rpm, grinding spindle motor power: 4,100 W, spindle stroke: 170 mm, operating pressure: 5 bar, input frequency: 50 Hz, For sale: SUNNEN precision bore honing machine - Type: ML-5000 - CGMI - Year: 2006 - Serial No.: 2D1-1116 For sale: a highly precise (± 0.001 mm) automatic bore honing machine – lightly used and in like-new condition – complete with numerous precision instruments, measuring devices, and extensive accessories for honing bores ranging from 6 mm to 25 mm in diameter. Rjdpfxsz Iyf Ds Airoch The machine is connected to the power supply and ready for operation.

Condition: like new (used), Year of construction: 2022, operating hours: 10,000 h, functionality: fully functional, number of slots in tool magazine: 80, MAZAK HCN-5000 Horizontal Machining Center Year 2024 Control Unit: Smooth G Rcodpfxoz Aaukj Airjh X-axis travel: 730 Y-axis travel: 730 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface: Tapped holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm (high torque) Spindle taper: ISO 40 Rapid traverse rate (X-axis): 60,000 Rapid traverse rate (Y-axis): 60,000 Rapid traverse rate (Z-axis): 60,000 Number of tools (ATC): 40-60-80 Maximum tool diameter (ATC): D. 95 D.170 Maximum tool length (from reference line) (ATC): 170 Tool selection method (ATC): FIXED Maximum tool weight (ATC): 12 Tool change time (ATC): 2.8 Coolant pressure: 15 Bar Coolant tank capacity: 500L Height (machine dimensions): 2813 Width (machine dimensions): 2623 Depth (machine dimensions): 5769 Weight (machine dimensions): 11430 Pallet size: 500x500

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix, workpiece height (max.): 100 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, table load: 700 kg, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 15 bar, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 80, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak HCN 5000-II horizontal machining centre. This machine was manufactured in 2007 and is fitted with the tried-and-tested Mazatrol Matrix control system. A robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 2 Table load capacity: 700 kg X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Table indexing: 0.001° Spindle mount: CAT 40 Spindle speed: 35 – 18,000 rpm Spindle motor: 35/26 kW Magazine capacity: 80 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. Rcedpfx Aijz Rmn Esroh About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Year of construction: 2014, functionality: fully functional, Operating hours and spindle hours: 23.323 / 15.894 CNC control: Siemens 840D sl TECHNICAL DATA: X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 880 mm Max. spindle speed: 12.000 rpm Max. torque: 102 Nm Tool taper: SK40 Rsdpfo Aa S T Rsx Airsch Max. workpiece weight per pallet: 500 kg Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm B-axis (table) indexing: 360 x 1 degree Number of tool positions: 40 FEED RATES Max. feed rate: 60.000 mm/min Rapid traverse: 60 m/min Jog feed rate: 0 – 5.000 mm/min Total power requirement: 57 kVA Machine weight: approx. 11.5 tonnes Space requirement: 5.5 x 3.0 x 2.8 m EQUIPMENT AND ACCESSORIES 2-station pallet changer; pallet size: 500 x 500 mm Chip conveyor, high-pressure coolant system (40 bar) Through-spindle coolant supply, tool changer, documentation B-axis in the table with 1-degree indexing Renishaw PP60op touch probe

Condition: used, Year of construction: 2011, x-travel 730 mm y-travel 730 mm z-travel 850 mm control MSX 701 IV MAPPS 4 max. spindle speed 14.000 min/-1 power capacity - milling spindle 22 / 18,5 kW tool taper HSK A-63 distance ground floor - table top edge 1.200 mm distance Spindlenose and center of table 100 - 950 mm numbers of pallets 2 size of pallet 500 x 500 mm max. workpiece weight 500 kg max. workpiecediameter 800 mm max. workpiece height 1.000 mm change time of pallets 7 sec Indexing-time 1,57 sec B-axis (table) 0,001 ° number of toolpositions 120 pos. Rcedpfj Af Naiox Airjh tool taper HSK A-63 max. tool diameter 70 mm max. tool-dia with free toolbox 140 mm max. tool length 500 mm max. tool weight 12 kg rapid traverse 50 m/min feed speeds max. 50.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 51 kW weight of the machine ca. 12 t dimensions of the machine ca. 5,5 x 3,0 x 2,8 m CNC - MachiningCenter Horizontal MORI SEIKI - NH 5000 / 40 DCG - 2 pos. palletchanger - 2x mounting towers - Processing time: approx. 14,200 hours

Condition: used, Year of construction: 2016, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 32 A, The RISCO RS 5000 filling machine has been unused for a year but was fully functional until then. It requires a technical inspection. Rcedpez Hixwjfx Airoh

Condition: used, Year of construction: 2006, functionality: fully functional, total length: 6,150 mm, total width: 2,470 mm, total height: 2,065 mm, overall weight: 13,000 kg, input voltage: 400 V, Equipment: emergency stop, # STADLER STT 5000 Ballistic Separator – Year of Manufacture 2006 – Shafts Replaced in 2025 For sale is a regularly maintained and well-kept ballistic separator from the manufacturer STADLER, type STT 5000, year of manufacture 2006, from our existing commercial waste sorting plant. The machine was used for the mechanical separation of different waste and recyclable material fractions and was permanently integrated into our stationary sorting line. ### Technical Data - Manufacturer: STADLER - Type: STT 5000 - Year of Manufacture: 2006 - Overall Length: approx. 6,150 mm - Overall Width incl. Motor: approx. 2,470 mm - Overall Height: approx. 2,065 mm - Overall Weight: approx. 13,000 kg - Number of Paddles: 6 - Paddle Length: 5,050 mm - Motor Power: 11 kW - Design Capacity: 12 t/h - Design Volume Flow: 80 m³/h ### Maintenance and Repair The ballistic separator was regularly and carefully maintained throughout its service life. Necessary repairs and the replacement of wear parts were carried out continuously. Rjdoz R Sfwepfx Airjch Major maintenance measures: - December 2025: All shafts of the ballistic separator were completely replaced. The investment costs amounted to approximately €80,000. A corresponding invoice is available. - 2024: All paddles were replaced. The machine is equipped with paddle coverings made of sheet metal. - Regular Maintenance: The screen segments with a grain size of 50 mm are replaced regularly. These extensive measures ensured continuous investment in the maintenance and preservation of the machine. Corresponding invoices and maintenance records can be provided upon request. ### Sale Due to Plant Modernization The sale is taking place due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation and records of the maintenance work carried out can be provided upon request. Price on request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: not inspected (used), Year of construction: 2003, Vertical CNC milling machine MORI SEIKI NV500A/50 (2003) at auction. MSG-501 control, X-axis travel 800 mm, table 1,100 x 600 mm, 30-tool magazine, spindle up to 8,000 rpm, machine weight approx. 6,700 kg. Used CNC mill Rcodpfx Aisz I Ebqjrsh

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm Rcjdpsxayl Dofx Airoh + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: good (used), Stainless steel tank 5000 L with mixer, cooling. In good condition Rcodpfxovr E N Ns Airsh They have a built-in pipe around the tank that can cool

Condition: used, Year of construction: 2018, operating hours: 18,682 h, machine/vehicle number: PST43, Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature alarm limits, differential control, probe calibration, relay restart delay, alarm relay timing and keypad locking. Digital input functions include door-open monitoring and selectable automatic or manual alarm reset logic.Controller functions also include probe-failure relay logic and password-protected programming parameters. A timed restart caution label is fitted, indicating that the unit may switch on after a time delay.Production Line Integration CapabilitiesThis juice pasteurizer can be integrated into a hot-fill beverage production line as a thermal processing stage upstream of filling equipment. In a typical industrial packaging configuration, product is thermally treated before transfer to a suitable hot-fill system, with downstream handling, labeling and secondary packaging arranged according to the final container format.The 5000 LPH capacity makes the equipment relevant for beverage production environments requiring continuous juice pasteurization. Final integration should consider product piping, hygienic connections, buffer capacity, filling-line throughput and thermal process coordination.Machine Condition & Maintenance HistoryThe machine records 18,682 running working hours. It is a 2018 unit with identified HRS Process Systems Ltd. process assemblies and an ADVANCE temperature controller. Inspection of heat-transfer surfaces, seals, pumps, instrumentation, temperature probes, electrical circuits and control parameters is recommended as part of commissioning planning for second hand bottling equipment.Operational Performance & VersatilityDesigned specifically for juice processing, this hot fill pasteurizer supports the controlled heating stage needed in hot-fill beverage production. Thermal treatment equipment of this type is used to help maintain a stable pasteurization process before product transfer to the filling area.The listed construction materials include 316L / 316L SMLS and 304 / 316L ERW configurations, supporting use in hygienic product-processing environments. Temperature control, alarm limits and probe-related functions provide operational tools for monitoring the pasteurization process.Installation Requirements & Site Preparation... Rodpo Adtqlofx Airech

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale is a WMF 5000-S-Plus fully automatic coffee machine. The machine is sold with all accessories, as shown in the pictures. Viewings are possible at any time and with short notice, subject to prior appointment. VAT is shown separately! Redpfxjw S T Hte Airech

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Rcjdpfx Aoxqh I Ioireh Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: used, Year of construction: 2017, operating hours: 900 h, functionality: fully functional, machine/vehicle number: 2575, Model/Type: RUF 18.5/5000/80 Machine No.: 2575 Year of Construction: 2017 Drive Motor: 18.5 kW Throughput Capacity up to max.: 550 kg/h (depending on material) Pressing Pressure: approx. 5000 kg/cm² Briquette Format: 80 mm Running Hours: approx. 900 h Warranty: 12 months after delivery Availability: approx. 8 weeks after receipt of down payment Rcedpfx Ast Sfxmsireh Details: + Siemens TP 700, Siemens S7-1200 + 600 x 1,000 mm hopper + Electrical emulsion pump + Spraying device + Extractable screw + Speed-controlled pump

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V Rcodpfx Aoyt Hwzoireh • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2023, A labeling system with two rotary tables and a scissor roller conveyor is offered. 1) Fully automatic Küppersbusch wrap-around pressure-sensitive labeling machine, type: ETT 5000-V, version for cylindrical containers with 3-roller system for front and back labeling, rated output: approx. 1200containers/h, bottle travel direction: right/left, bottle diameter range: 40mm-80mm, conveyor length: approx. 2500mm, conveyor width: approx. 82mm, conveyor height: 800mm +/-100mm, Küppersbusch ETT 4301/200 label dispenser, backing paper width: 30mm-200mm, label roll core: 76mm, max. label roll outside diameter: 280mm. 2) Küppersbusch infeed rotary table: diameter: 1000mm, version with V2A stainless-steel tubular frame and plastic plate. 3) Küppersbusch accumulation rotary table, diameter: 1000mm, version with V2A stainless-steel tubular frame and wear-resistant, noise-damping plastic plate. In addition, a total of four rollers for different bottle formats are available. The support rods of the opposed rollers were shortened for processing bottles with spray heads. The system was used only in single-shift operation. The system is available from January 2027. Documentation available. An on-site inspection is possible. Rcsdpfx Aszv T Nbeirsh

Year of construction: 2011, condition: like new (used), functionality: fully functional, FGL Glass Storage System + Lightweight Platform Model: FGL-V-5000-CKE-190/BL4 Year: 2011 Load Capacity – per compartment: max. 2,200 kg per compartment Frame: 600 kg/m² Total weight: 6,850 kg / 145 kg per compartment Positions: 8 x 5 = 40 positions Model: Lightweight platform for FGL-V-5000-CKE-190/BL4 Year: 2011 Rcedpezxc Hbefx Airoh Load capacity of lightweight platform: 600 kg/m² Total load capacity of lightweight platform: 25 tons Weight of lightweight platform: 1182 kg Dimensions: L = 9660 mm / W = 4220 mm / H = 2980 mm