Accumulation roller conveyor

Transnorm 24V 2520-880-800

Condition: new, Year of construction: 2024, The SCHORR RR500DHKAHR track dumper is specially designed for transporting heavy and bulky materials such as wood or pipes. With a payload of 500 kg and a powerful 9.2 hp single-cylinder 4-stroke petrol engine, it handles demanding tasks with ease. The robust transmission with 6 forward and 2 reverse gears ensures precise control. The powerful chain drive ensures that the dumper can also work confidently on difficult terrain, on inclines and over kerbs. The rubber tracks ensure a secure footing and offer stability on a wide variety of surfaces - from muddy fields to gravel paths. The hydraulic tipping drive of the RR500DHKAHR also offers clear advantages in the version with wooden stanchions. Even heavily loaded loads such as logs or long materials can be secured and transported effortlessly. The robust design ensures stability and a secure hold of the load, even on uneven terrain. The large hydraulic oil tank with integrated oil filter contributes to the dumper's long service life and minimizes maintenance requirements. Thanks to the powerful hydraulic system, loading and unloading is efficient and easy to handle, saving both time and physical effort. Ideal for use in the forestry sector and on construction sites, the RR500DHKAHR meets the highest standards of performance and reliability. SCHORR track dumper RR500DHKAHR - Discover the advantages: -- 9.2 HP four-stroke engine Gbedpfx Asvfp Dweh Hsg -- Self-propelled & powerful track drive -- 500kg payload -- Large and stable wooden stanchion with optimum tipping angle for efficient unloading -- Folding passenger platform as standard -- 6+2 gears Technical data: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR500 Model: DHKAHR Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight: 328kg Drive system Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Speed: forward gear Forward gear: max. 8km/h Reverse gear: max. 5 Liquids Fuel tank capacity: 6L (unleaded petrol) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Max. Hydraulic oil flow rate: 9L/min Basic dimensions Overall length of platform (folded): 1720mm Overall length of platform (unfolded): 1920mm Total width of stanchion (unfolded): 1250mm Total width of stanchion (folded in): 865mm Total length stanchion / platform: 965mm Inner width of stanchions, top: 1175mm Stanchion inside width, bottom: 775mm Inner distance, stanchion - stanchion: 370mm Total height (handle - floor): 1050mm Overall height (stanchion - floor): 900mm Total height stanchion: 460mm Stanchion dimensions (outer dimensions) L x W x H: 965mm x 1250mm x 460mm Stake thickness: 40mmDrive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm *Further technical data available on request. The RR500DHKAHR tracked dumper is the perfect solution for transporting materials such as wood, pipes or bulk goods, especially on rough terrain. Its compact design and track drive enable maximum maneuverability, even in areas that are difficult to access.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, water tank capacity: 3,000 l, power: 300 kW (407.89 HP), year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 131 l/min, Woma 325Z P30 diesel-driven high-pressure unit 1000 bar 131 l/min Well-functioning machine, ready for immediate use Machine built into a MAN TGA 26.320 6x2 year 2007 Euro 4 only 64,000 km truck is in top condition EXPORT ONLY Gbjdpjxb Dp Ajfx Ah Hjg

Year of construction: 2026, condition: new, Specifications: - Performance: 2000 L/h - Electric demands: 0,5 kW, 230 V, 6 A, monophase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 550x1075x350 mm - Weight: 50 kg Gedpfx Ahsfhb I Hs Hobg - IP65 certified electronics - Food industrial impeller pump - Juice level sensors - Fully automatic operation, very easy to clean. - With 4pcs wheels. Requires minimal maintenance. - The machine is suitable for any Maurer press.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Gbodpow Uf Ihofx Ah Hjg Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. Gjdexufbtopfx Ah Hjbg General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Condition: excellent (used), Well-maintained Hammelmann HDP 42, 970 bar and 16.5 litres, year of manufacture 2012. Godjxgvhnopfx Ah Hjbg

Condition: new, Year of construction: 2023, operating pressure: 1,000 bar, fuel: diesel, Kärcher HD 9/100 De Skid Advanced High pressure cleaner with up to 1000 bar This is an unused exhibition device! Current manufacturer RRP €80,000! The machine is being sold as a used machine with no return, guarantee or warranty. Net price €24,900 // Gross price €29,631 - Viewings possible! - Shipping can be organized nationwide, costs €300 Gjdpfxjvz Aq As Ah Hebg - We would be happy to have our leasing partner create an attractive leasing/financing offer for you!

Condition: used, Year of construction: 2004, SECOND-HAND GLUE SPREADER OSAMA MOD. S2 R 1300 - CE RULES - Working width 1300 mm - N. 2 rollers Gsdpfx Asmxkxush Hobg - Year 2004

Condition: good (used), Roller conveyor, conveyor belt, roller track Gbsdpfx Ahsb Rr R Io Hjg -with turning station -Pneumatically extendable via foot switch for turning material -Roller width: 800 mm -Conveyor length: 1500 mm -Roller diameter: 80 mm -Axle spacing: 150 mm -Height: 240 mm -driven: via chain -Geared motor: 0.75 kW -Dimensions: 1500/1420/H240 mm -Weight: 240 kg

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 650 mm -Conveying length: 1800 mm Gjdpfsb Rud Sjx Ah Hsbg -Diameter roller: 80 mm -Center distance: 150 mm -Height: 270 mm -driven: via chain -Geared motor: 0.37 kW -Speed: 6.9 m/min -Dimensions: 1800/720/H270 mm -Weight: 134 kg