Trotec Speedmarker 300

Trotec Speedmarker 300

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. Bljdozvm Azepfx Ahdsp - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg

Condition: new, AVAILABLE FOR PURCHASE OR RENT Boderu E Svopfx Ahdelp Please read the technical specifications carefully. If the machine is a worthwhile investment for you, please provide your complete contact details, including a valid phone number and email address, so that we can prepare a quotation. Fiber Laser 30W Marking area: 200 x 200 mm Workpiece size max: WxHxD: 550 x 450 x 350 mm Laser type: Fiber 30 Watt Wavelength: 1064 mm Marking speed max. 7000 mm/sec Motorized Z-axis, height: 700 mm Repeatability/lens: +/- 0.001 mm Line thickness min. approx. 0.01 mm Power supply: 240 V/50 Hz External dimensions: 110 x 80 x 200 cm Front door: manual Includes software and PC Can be inspected on-site while powered Price net, plus VAT

Year of construction: 2023, condition: new, machine/vehicle number: PRJ065955, ALZMETALL bench drill press, drilling capacity in steel: 12 mm Drill chuck mounting: B16 external taper, spindle stroke: 40 mm, overhang: 200 mm, column diameter: 50 mm, usable table surface: 300x240 mm, with T-slots 2 x 12 mm x 80 mm, distance spindle-base plate min./max. 110/250, manual feed, machine height without options: 670 mm, net weight: 64 kg. - Speed infinitely variable 250-5000 rpm Standard equipment: 5" TFT-LCD display with touch function: manual input of target spindle speed, display of actual speed, integrated depth gauge with touch function for zeroing, virtual depth scale on the display, machine status indicators and warning messages on the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU AC motor 230 volts, 50 Hz, connection plug pre-assembled, cable length 2 m, three separate buttons for clockwise rotation - counterclockwise rotation - stop, Spindle stop via braking function, spindle guard with electrical protection, main switch lockable, mushroom push button (self-locking) for EMERGENCY STOP, speed adjustment continuously variable via potentiometer, protection class IP54, spindle guard with electrical protection, paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Bledpfx Ahjlub Rdedop including the following options: LED machine light, item no. 12. Delivery time: from stock, Waiblingen/Beinstein

Condition: ready for operation (used), We have a BECK HV600 shrinktunnel available. This machine is ready and is working like new! Bedpfx Aohcdhljhdolp The measurements are in the pictures.

Condition: new, Year of construction: 2026, machine/vehicle number: JEWELliner XS30-PRO Std, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 50 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Standard" with 30W CW laser power equiped with an electric lift door, an auto-focus function and is builded in a compact machine dimension to fit into most rooms. - Developed and produced in Germany - Bljdoc Rmy Nepfx Ahdjp Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Standard" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software "BNMARK5" ! Made in Germany ! developed by BN Laser - optional - rotary axis with removable jewelry jaw chuck Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L600 x W400 x H500 mm - weight: 55kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Bsdotmqi Djpfx Ahdjlp Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 2007, grinding length 600 mm Blsdsykmqvspfx Ahdop grinding width 400 mm workpiece height 375 mm Gewartet und Längsachse neu eingeschabt Glasmaßstäbe in der Senkrecht- und der Quer-Achse Schleifscheine 300/50/76,2 mm Magnetspannplatte 600x400mm mit Haftkraftregelung Universal-Papaierfilterautomat UPF100 mit 280l Tankinhalt.

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Stock number: 0395 Bljdpfx Aoywd Akshdop Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: used, Year of construction: 2002, turning diameter 280 mm Bledpfozdu T Dex Ahdsp turning length . mm control Mazatrol 640 T x-travel 190 mm y-travel 309 mm z-travel 330 mm turning speeds 4000 U/min feed 30 m/min number of tools 12 bar loader ja total power requirement 24 kvA weight of the machine ca. 3,5 t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), We offer a range of tools for press brakes, almost exclusively from the Trumpf brand: OW / OWZ: Upper tool (punch), Top Tool UW / UWZ: Lower tool (die/matrix), Bottom Tool/Die Details, prices, and specifications: OVERVIEW OF INDIVIDUAL SETS (Radius / Angle / Composition): 1. Upper tool (punch) – OW 210/S (R1 / h-240 / 28°) Set composition: 3 pcs x 500 mm, 8 pcs x 300 mm, 2 pcs x 250 mm, 4 pcs x 200 mm, 1 pc x 170 mm, 1 pc x 140 mm, 1 pc x 110 mm, 3 pcs x 100 mm, 2 pcs x 100R mm, 2 pcs x 100L mm, 1 pc x 75 mm, 2 pcs x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 2 pcs x 35 mm, 2 pcs x 30 mm, 2 pcs x 25 mm. Total length of the set: 6,760 m Price per meter: 1,069 EUR Total price of the set: 7,226 EUR Bljdpfx Ahszrw A Redjp 2. Upper tool (punch) – OW 200/S (R1 / h-220 / 86°) Set composition: 7 pcs x 300 mm, 7 pcs x 200 mm, 1 pc x 100R mm, 1 pc x 100L mm. Total length of the set: 3,700 m Price per meter: 935 EUR Total price of the set: 3,460 EUR 3. Lower tool (die) – EV 004 - W12 (R1 / h-150 / 30°) Set composition: 5 pcs x 500 mm, 1 pc x 200 mm, 1 pc x 180 mm, 3 pcs x 100 mm, 1 pc x 55 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 3,485 m Price per meter: 802 EUR Total price of the set: 2,794 EUR 4. Upper tool (punch) – OW 202 K (R1 / h-120 / 28°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 1 pc x 200 mm, 1 pc x 100 mm, 1 pc x 100R mm, 1 pc x 100L mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4,050 m Price per meter: 735 EUR Total price of the set: 2,976 EUR 5. Lower tool (die) – EV 004 - W12 (R1 / h-100 / 30°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 1 pc x 200 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4,050 m Price per meter: 668 EUR Total price of the set: 2,706 EUR 6. Lower tool (die) – EV/S-W10 (R1 / h-100 / 84°) Set composition: 2 pcs x 500 mm. Total length of the set: 1,000 m Price per meter: 601 EUR Total price of the set: 601 EUR 7. Upper tool (punch) – OW 280/K (R0.5 / h-140 / 80°) Set composition: 1 pc x 500 mm, 1 pc x 300 mm, 1 pc x 100R mm, 1 pc x 100L mm, 1 pc x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 1,350 m Price per meter: 735 EUR Total price of the set: 992 EUR 8. Lower tool (die) – EV 005 W16 (R1.6 / h-150 / 30°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm, 1 pc x 200 mm. Total length of the set: 4,050 m Price per meter: 802 EUR Total price of the set: 3,247 EUR 9. Lower tool (die) – EV 006 W 20 (R2 / h-150 / 30°) Set composition: 6 pcs x 500 mm, 2 pcs x 300 mm, 1 pc x 200 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4,350 m Price per meter: 802 EUR Total price of the set: 3,487 EUR Total length in the package: 36.960 m Please feel free to request a custom price for the entire tool package!