Chiller

Used Chiller AERMEC - 26.3 kW | With warranty

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 11.11.30. Blasting chamber W=1050 D=1050 H=955mm. 1 TÜV-tested pressure vessel 30l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Electrical height adjustment of the cabin for body-friendly posture. Memory position storage for 3 heights. Dust extraction filter 2000m³/h 2,2kW. Nsdpfx Akjga Ehbefjcr

Condition: excellent (used), White Type: WKL 34/60 Weiss air-cooled climate chamber Refrigerant converted to R-452A -60°C to 150°C Room volume: 34 liters Entry port installed in basic equipment: R1 NW 50 mm Ncjdpfxetr Dine Akfjr L1NW 120 mm Internal dimensions: Height 310 mm Width 324 mm Depth 300 mmm External dimensions: Height 1740 mm Width 630 mm Depth 970 mmm Characteristic values for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation in space (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Characteristic values for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 %r.H. Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation in space ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 %RH Data for operation: Test room lighting Halogen bulb 12V, 20W Nominal voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A On-site fuse 16A slow-blow Heat dissipation air-cooled test chambers Max. Heat dissipation to surroundings 1700 W Refrigerant: R-452A / R23 Weight: 140 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Weight: 281 kg. Working hours: 2330 h. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Ncedewp Dq Sspfx Akfjr The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: Nodstpu Szopfx Akfjcr THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Year of construction: 2016, condition: as good as new (ex-display), Axial fan condenser, air ccoler Manufacturer: Güntner Model: GCVC RD 035.1/12-42-0007305P Year of c.: 2016 Ncedpsnbff Aofx Akfsr 2 fans Volume: 4,6 l Comressed air: 32,5 bar

Condition: good (used), Rotary vibrator, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, trowal system, continuous vibrator, vibration conveyor, oscillating conveyor -Manufacturer: circlon, round vibrator Trowal vibrator with soundproof hood Nsdpfx Aeiy Ef Aokfjcr -Total volume: 230 liters -Type: CLS-230 -Working container: elastically mounted -Working basin width: 250 mm -Outlet: approx. 200 x 260 mm -Working basin height: 510 mm -Equipment: manual separating flap, infinitely variable engine speed via variator gear, liquid connection -Machine for: deburring, polishing, rounding edges -Transport dimension: 1700/1600/H2240 mm -Total weight: 1150 kg

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection Ncsdpfjg Ey Ufjx Akfer *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of input current: three-phase, type of cooling: air, overall weight: 375 kg, input voltage: 400 V, total width: 760 mm, total length: 1,870 mm, total height: 1,450 mm, warranty duration: 6 months, Aircooled chiller MTA TAEevo Tech 081 22 kW Cooling capacity: 22 kW / 6.26 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP103KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 2 pcs (centrifugal) Hydraulic module: 1 pcs. water pump Lowara CIE120/5/D Dimensions: 1.87x0.76x1.45 m. Weight: 375 kg. Working hours: 1110 h. Ncsdpfx Akewwtqwefer Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 50.5 kW (68.66 HP), type of input current: three-phase, type of cooling: air, overall weight: 604 kg, input voltage: 400 V, total width: 780 mm, total length: 2,360 mm, total height: 1,680 mm, warranty duration: 6 months, heating capacity: 50.3 kW (68.39 HP), Aircooled chiller/Heat pump DAIKIN EWYQ050CAWP H 50.5 kW / 50.3 kW Cooling capacity: 50.5 kW / 14.36 tons (12/7 — 35°C) Heating capacity: 50.3 kW / 14.3 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Daikin JT1GCVDKYRBA (scroll, inverter) + 2 pcs. Daikin JT170G-KYEBA (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Ncedjw Hzyxjpfx Akfjr Hydraulic module: 1 pcs. water pump GRUNDFOS CM10-2-X-R-A-E-AQQEF-A-A-N, expansion vessel. Dimensions: 2.36x0.78x1.68 m Weight: 604 kg Working hours: 32957/32957/32957/32957 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTC20 - 14720, cooling capacity: 21 kW (28.55 HP), type of input current: three-phase, type of cooling: water, overall weight: 225 kg, input voltage: 400 V, total width: 950 mm, total length: 1,080 mm, total height: 1,400 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Air-cooled chiller / water chiller, Type: NOVATECH NTC 20 NOVATECH NOVATECH NTC 20 are air-cooled compact water chillers suitable for indoor/outdoor installation (IP 54). Includes a shell-and-tube evaporator, 110-liter buffer tank, and built-in circulation pump. Galvanized steel frame, hot-painted with polyester powder. Special features: Ncedpfx Akewcflwefjr - Mounted expansion tank for internal water only - Shut-off valve between water inlet and outlet - Water outlet balancing valve Cooling capacity: 21 kW Cold water temp. Outlet/Inlet (°C): 15 / 20 Flow rate (l/min) max. 100 Available pump pressure (bar) max. 3.3 Ambient temperature (°C) 35 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW) 8.85 Max. current (A) 12.5 Starting current (A) 19 Protection class: IP54 Dimensions: Length (mm) 1080, Width (mm) 950, Height (mm) 1400 Weight (kg) 225 Connection: Rp 1" Serial no.: 14720 Year of manufacture: 2020 Condition: Visually 1-2, Technically OK Used, like new Price: Available upon request in euros (plus VAT from Nettetal) – 3-month warranty Used machines may have cosmetic defects due to use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau