Chiller

Used Industrial chiller Uniflair BREC2202A 503 kW

Condition: used, Year of construction: 2018, Overview  The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time.  Technical details  - Number of filling places: 48  - Pitch circle diameter: 1560 mm  - Capacity (last):  - 250- 300 bottles/ min at 500ml fruit syrup. - For used twist-off cap an additional capper would have to be organized  - 160 - 200 bottles/ min at 250ml maple syrup  - Used plastic cap can be applied by installed AROL capper  - Dimensions  - Length: 3.000 mm - Width: 2.500 mm - Height: 2.500 mm - Weight: 6.500 kg   - Electr. characteristics - Voltage: 400 V - 50 Hz  - Auxiliary voltage: 24 V DC  - Installed power: 20 kW  Scope of delivery  - Filler | Zilli& Bellini | GD48/12 | 2018 - Capper | Arol | TSI - EURO VP - W6 | 2018 Fgsdpsnhikiofx Ap Doh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Fgsdpowf I Hiefx Ap Dsh Hersteller: NETSTAL Typ: ELION800-270PM Baujahr: 2008 Schließkraft: 80 Tonnen Holmabstand 410 x 410 mm Einbauhöhe min. /max.: 500 mm Öffnungsweg: 350 mm Schnecken DN: 40 mm Max. Hubvolumen: 160,8 cm³ Spritzteilgewicht in PS: 154,3 g Kernzüge 2 Stück

Condition: excellent (used), Year of construction: 2013, Haitian Mars II 7000/2950 Injection Moulding Machine Year of manufacture: 2013 The machine is equipped with an injection unit offering 7000 kN clamping force and a specific injection pressure of 1580 bar. It features a mixing screw with a diameter of 80 mm, allowing for a maximum stroke volume of 1860 cm³ and a maximum shot weight (for PS) of 1692.6 g. The screw rotation speed reaches up to 200 rpm, and the plasticizing capacity (for PS) is 76.8 g/s. The cylinder heating power is 38.35 kW. The clamping system enables mould installation with a mould height range from 400 to 940 mm and a clearance between tie bars of 940 × 960 mm. The opening stroke is 970 mm. Mould centring on the A.S. and D.S. sides is 200 / 200 mm. The ejector stroke stands at 260 mm (stroke) and 200 mm (passage). Equipment includes core drives: - on the moving platen – 2 units, Fedpfow U Tylex Ap Degh - on the fixed platen – 2 units.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 110-014358, total length: 6,000 mm, total width: 2,240 mm, load capacity: 12,500 kg, working height: 6,000 mm, Abus 12,500 KG single-girder overhead crane in very good condition. - Span: 5740 mm center-to-center. - Lifting capacity: 12,500 KG - Lifting height: 6 m - Year of manufacture: 2011 - Wired control Delivery, customization, installation, inspection, and commissioning are all possible upon consultation. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Traveling cables Keywords: overhead crane, gantry crane, Abus, Demag, Kone, Konecranes, Stahl Fedpfx Ajy Uwubop Dogh

Condition: new, Year of construction: 2026, Powder coating booths, sizes defined by customer, Fgsdeizw Hyspfx Ap Dsh Additional equippment possible.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 137 kW (186.27 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,795 kg, input voltage: 400 V, total width: 2,020 mm, total length: 3,800 mm, total height: 1,970 mm, warranty duration: 12 months, heating capacity: 154 kW (209.38 HP), Aircooled chiller/Heat pump GALLETTI MLE144PS2A 137 kW/154 kW Cooling capacity: 137 kW / 38.96 tons (12/7 — 35°C) Heating capacity: 154 kW / 43.79 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump. Hydraulic module. 4-pipe system. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH161A4ALD (scroll, soft starter) Type of refrigerant: R454B Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump EBARA 3M40-125/2.2-Q7AE-NEDN Dimensions: 3.8x2.02x1.97 m. Weight: 1795 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Fjdpfjy H Dhlox Ap Degh Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 2011, clamping force: 2,250 kN, screw diameter: 60 mm, injection weight: 700 g, This Husky HL225 RS65 was manufactured in 2011. It features a clamping force of 225 tons and a screw diameter of 60 mm, optimized for high-speed PET preform production. The machine includes a platen size of 750 x 750 mm and an opening stroke of 500 – 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky HL225 RS65 electrical injection moulding machine we have for sale. Contact us for further details. • Clamping Unit • System: 2-platen • Tie bar distance: 510 × 510 mm • Platen size: 750 × 750 mm • Opening stroke: 500–550 mm • Mould height: 200–600 mm • Injection Unit (RS65/60) • Injection volume: 565–650 cm³ • Injection pressure: up to ~2000 bar Fgodpfx Aoyxnidsp Dsh • Injection speed: High-speed (optimized for PET) • Electrical & Control • Technology: Full electric • Drive system: Servo motors • Energy consumption: Lower vs. hydraulic machines

Condition: excellent (used), Year of construction: 2014, operating hours: 44,918 h, functionality: fully functional, power: 275 kW (373.90 HP), volume flow: 2,662 m³/h, pressure (max.): 7.5 bar, Equipment: refrigerant dryer, type plate available, Second-hand oil-free Atlas Copco ZT275FF. Year of manufacture: 2014, with around 44,000 operating hours. 275 kW, 7.5 bar, with 44.38 m³/min. Integrated drum dryer. Fodpfsxr U Rxsx Ap Degh