Dissolution tester

VanKel VK7000

Condition: refurbished (used), Available rubber testing equipment Dusdpswmnlhofx Aa Nst 1 x Alpha Production MDR Rheometer (optionally in container with pneumatic sample punch) The device has been inspected, calibrated, and equipped with new software on a new tower PC!

Condition: used, Year of construction: 1996, diameter / mm workpiece length / mm length / mm MITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plate Size: 600 x 600 x 80mm Target µm: 16 Actual µm: 10,00 Duodpfx Astvm Smsa Nst Own weight: 85kg Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery.

Condition: used, SPECTRO SPECTRO MAXx / LMM04 Description: For sale is an optical emission spectrometer SPECTRO MAXx, designed for professional metal and alloy analysis. The instrument is suitable for rapid and precise determination of the chemical composition of metals such as steel, cast iron, and various non-ferrous alloys. This is a proven industrial device, commonly used in foundries, laboratories, and for quality assurance. Device and Maintenance Information: - The device has been covered by a maintenance contract and maintained professionally on a regular basis. - Several programs have been calibrated annually. - Last maintenance: 22.12.2023 - Operates without a vacuum pump – flushing is performed exclusively with argon. Regularly calibrated programs: - Fe-10, Fe-15, Fe-30 - Al-10, Al-20 - Cu-20 Overview of installed programs: - Fe-01-M / Fe-10 – low alloy steel - Fe-01-M / Fe-30 – Cr / CrNi steel - Fe-15-M / Fe-15 – free-cutting steel - Al-01-M / Al-10 – pure aluminum - Al-01-M / Al-20 – AlSi alloy - Cu-01-M / Cu-20 – CuZn alloy Technical Data: Device Details: - Device type: Optical Emission Spectrometer (OES) - Manufacturer: SPECTRO / AMETEK - Model: SPECTRO MAXx - Construction: Benchtop unit Electrical Data: - Power supply: 115 / 230 V AC - Frequency: 50 / 60 Hz - Power consumption (operation): approx. 400 VA - Power consumption (standby): approx. 180 VA - Fuse: 16 A (slow-blow) Gas Supply: - Operating gas: Argon (Ar) - Argon purity: min. 4.8 (99.998%) - Inlet pressure: approx. 7 bar Argon Consumption: - Stand-by: approx. 6 l/h Dujdpfx Aaeybcfks Not - Continuous operation: approx. 23 l/h - Analysis operation: approx. 200 l/h Environmental Conditions: - Operating temperature: +10 °C to +30 °C - Relative humidity: 20–80%, non-condensing Dimensions & Weight: - Size (W × D × H): approx. 600 × 740 × 460 mm - Weight: approx. 60 kg Important Note: The table shown in the photos is not included in the sale. Condition: Used Scope of delivery (see images): - SPECTRO MAXx spectrometer - PC with monitor, keyboard, and mouse - Argon unit - Original manuals and software media Subject to change and errors in technical data. For further questions, we are happy to assist you by phone.

Condition: used, Hardness tester, hardness measuring machine, hardness tester, impact hardness tester Dsdpfshck U Sex Aa Njut -Handover: in its current condition as inspected -Tool set: incomplete -Hahn & Kolb: mobile hardness testing device -Individual components: see photos -Box dimensions: 355/190/H95 mm -Weight: 5.4 kg

Condition: used, Year of construction: 1957, brinell hardness 250 kg rockwell hardness 150 kg throat 130 mm checking height 300 mm weight of the machine ca. 0,150 t dimensions of the machine ca. 650 x 530 x 1550 m Tests possible by system Rockwell, Vickers, Brinell. This device is a used one. Therefore we sell it without warranty. Dujdju T R Tkjpfx Aa Nst

Year of construction: 2000, condition: good (used), Residual Oxygen Meter for checking the gas content in insulating glass. Dimension: Width: 245mm, depth: 185mm, height: 95mm, Duodpsht Evpofx Aa Njt Weight: about 3kg

Condition: used, Technical details: diameter: 20 mm workpiece length: - mm total power requirement: 2,3 - 3,0 kW open-circuit voltage: 2,8 V frequency: 50/60 Hz power consumption: 3 kVA connection voltage: 230 V control voltage: 15 (Gleichstrom) V dimensions of the machine ca.: 1,0 m weight of the machine ca.: 30 Kg dimensions L x W x H: 395 x 275 x 255 mm Dsdpfxew Rkybo Aa Nout The crack tester consists of a portable housing with control and display elements, as well as connection cables for magnetization and a power plug. Area of application The crack tester is designed for surface crack testing of weld seams, large forged and cast parts, machine components, but also as a power unit for stationary crack testing benches. Only ferromagnetic workpieces can be tested! During magnetization, the workpiece must be sprayed with a test fluid (test medium). Defects can then be detected under UV light (UV lamp). *

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Dsdpfx Aajuuarye Njut Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos Djdpfx Aog Sxyvsa Njut -Price: per box -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power Djdpfxox A Imzj Aa Nsut BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.