4/3 way valve

Vickers DG4V-3-6C

Condition: good (used), Year of construction: 2010, operating hours: 1,00,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Gsdpfju Rptyjx Anzjbn Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: excellent (used), Year of construction: 2005, CNC Lathe GILDEMEISTER NEF 400 Year of manufacture: 2005 Control: Siemens 840 D Technical specifications: Turning length: 650 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 270 mm Spindle bore: 65 mm Travel X-axis: 220 mm Travel Z-axis: 700 mm Max. main spindle speed: 4,000 rpm 8-position tool turret Machine weight: approx. 3,175 kg Gedpfeyin Imsx Anzsbn

Condition: ready for operation (used), Length: 8225mm, width: 3200mm, with documentation. Gbodpfxsi Ew Dpj Anzsn

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm max. swing diameter 175 mm max. bar length 3.000 mm control System TX 8F travel -x axis 140 mm Gbedpexbtq Nefx Anzon travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Condition: good (used), Multi-spindle lathe (6 spindles) max. bar diameter 16 mm guide tubes 4,000 mm Gedpfxsp Dux Tj Anzsbn chip conveyor

Year of construction: 1989, condition: ready for operation (used), Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible. Gsdpoxwn Ihjfx Anzjbn

Year of construction: 1986, condition: ready for operation (used), Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible. Gbodpfswmqx Djx Anzen

Condition: used, Year of construction: 1997, stations 10 / 22 tool taper SK 40 control SIEMENS SIMATIC OP 3 Godpfotqqlrsx Anzebn total power requirement ca. 130 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 10 units, drilling and thread cutting 5 units; drilling and sinking 3 units; drilling, sinking and thread- cutting 1 unit, thread cutting 3 units), spindle taper SK 40 each, engine power of the individual units between 4.5 and 5.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device

Condition: used, Year of construction: 1994, functionality: limited functionality, spindle bore: 42 mm, spindle speed (max.): 4,000 rpm, spindle motor power: 7,500 W, The machine is in continuous operation, producing hydraulic fittings from hexagonal 22 (automatic steel). It is a very rigid and efficient machine for simple components. The machine is equipped with a FETTE tangential thread cutting attachment. Two such machines are available; one is additionally fitted with a side drilling unit and a thread milling attachment with a large set of milling cutters. Both machines come with a large set of tool holders and collets. Price for both machines is negotiable. Gsdexq Rz Dopfx Anzobn

Condition: used, TECHNICAL DETAILS - Posts number : 16 - Indexing time : 0,7 [s] - Max. bar diameter : 32 [mm] - Clamping type : collet VB 32 - Max. part length : 150 [mm] - Max. number of horizontal units : 16 - Max. number of vertical units : 24 - Max. number of all units : 24 - Electrical supply : 400 [V] - Installed power : 40 [kW] - Dimensions : 9,8 x 4 x 2,9 [m] - Weight : 6 500 [kg] Gsdpsuhbwijfx Anzebn EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT - 2 turning units CNC 2 axes - Band part conveyor - Chip conveyor - Lubricating tank - Filtration