Heavy Duty CNC lathe

Victor Vturn-46

Year of construction: 2014, operating hours: 8,674 h, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min TURRET HEAD: 10 POS CONTROL UNIT: FANUC 0i-TD Kjdpoq H Tr Tjfx Abceww WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; SWARF CONVEYOR ; ETHERNET PORT ; RS 232 SERIAL PORT ; PCMCIA SERIAL PORT ; USB PORT

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) Kwjdpsd Amgkofx Abcow DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: used, Year of construction: 1993, Victor V Turn 46 Year of manufacture: 1993 Kwodpoxyvkisfx Abcow

Condition: good (used), Year of construction: 2015, operating hours: 35,800 h, functionality: fully functional, Doosan Lynx 220LSY – Sub-spindle CNC lathe SPECIFICATION Control: Fanuc 0iTD Main spindle max. speed: 6,000 rpm Main motor power: 15 / 11 kW Driven tool power: 3.7 kW Number of tool stations: 12 (24 positions) 3-jaw hydraulic chuck: 170 / 135 mm Swing diameter (bed/turret): 600 / 400 mm Max workpiece: Ø 300 x 510 mm Max bar diameter: 51 mm Rapid traverse (X/Y/Z): 36 m/min Kwedpfx Absya Hqbscjw Y-axis travel: ±52.5 mm Turret indexing time: 0.11 sec Travel ranges: - X: 205 mm - Z: 560 mm Equipment: High-pressure coolant, 0.7 MPa Transformer Chip conveyor Tool setter Collet chuck (with 3 collets) Bar feeder for rods up to 1.5 m Workpiece ejector Workpiece catcher and outfeed system Tool load monitoring

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 Ksdpfx Aevzhf Ssbceww cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. Kodpfx Aohzbipsbcoww - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 2003, Turning length 1000 mm Spindle bore 65 mm Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Turret w/12 stations Control: Kwjdpfex N A I Nsx Abcjw Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Various tool holders

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° Kedpfxeinh Rqe Abceww rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: ready for operation (used), Year of construction: 1989, This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. Kwsdpfex D R Rrex Abcsw • Tailstock Additional equipment • Three-jaw chuck and dead-collet head 185e • Chip conveyor • Clamping wedges for tools

Condition: excellent (used), Year of construction: 1991, max. wheel diameter 10 - 330 mm gear width 180 mm max. module 7 min. module 0,5 clamping length 420 mm number of teeth 10 - 600 ical angle +/- 45 ° turning speeds 1100 - 1900 U/min grinding wheel diameter 280 - 350 mm Kedpfxjw I Hq Ds Abcsww grinding wheel width 84 - 104 weight of the machine ca. 5,1 t dimensions of the machine ca. 4,5 x 6,0 x 2,3 m