HORIZONTAL POWDER COATING LINES

VOGAMAKINA VMAUTO

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Pgsdpfxjxlknmj Alwst Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: new, Year of construction: 2025, Oven for the powder paint shop powered by natural gas. The furnace is designed for the polymerization of powder paint. It is equipped with the latest heat exchanger made entirely of stainless steel AISI 1.4301, characterized by very high efficiency. Working dimensions (mm): 1500 (W) x 9000 (D) x 2200 (H) Technical data: • Power supply 400V 50Hz • 2 x Riello 90kW burners • Operating temperature 210C • Maximum temperature 230C •High-class thermal insulation 150mm •Baffle in the middle of the stove allowing 50/50 Equipment: • upper transport, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the heating process of details), • Safe opening and closing locks, • timer module, • Thermoregulator (controls the temperature inside and maintains it at the right level), • The stove is equipped with rails for easy transport. Cbauevig73 pvxg CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. are WE certified. We offer our own transport - prices are set each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Pgodpfx Asfktipolwet Feel free to contact us.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Psdpfjfz U S Ejx Alwjgt Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: Psdpoum Ufljfx Alwegt - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven - Conveyor system - Electrical control system - Services & accessories

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 100 kg, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Semi-automatic powder coating system | Batch system with chemical pre-treatment & curing oven Compact, semi-/partially automatic batch powder coating system for steel components (1,500 x 500 x 500 [mm]). Complete system including 2-chamber spray tunnel (degreasing/phosphating/rinsing), flash-off oven, mobile powder spray booth, curing oven (max. 220°C), cardan chain conveyor, and PLC control. New system / project proposal – special dimensions, heating types, layouts, etc. can be individually adapted to customer requirements. System concept & customer-specific customization: Semi-automatic powder coating system in batch mode for the efficient coating of steel parts. The system combines a compact footprint with high throughput and is ideal for small to medium-sized series components. The pre-treatment process is automated in batch mode, and the coating is applied manually. Note on design: The dimensions, assemblies, and heating types listed below correspond to the indicative offer presented. All components (e.g., useful lengths, booth dimensions, chain path, gas instead of electric heating) can be fully customized to your specific component dimensions, space requirements, and process requirements. - Max. component dimensions (standard indicative offer): 1,500 x 500 x 500 [mm] (variable) - Max. load capacity per carrier: 100 kg per batch (higher load capacities on request) - Space requirement / footprint: approx. 12,000 x 6,500 [mm] (layout can be flexibly adapted) - Total connected load: approx. 88 kW (max.) - Batch cycle time / feed rate: Batch dwell time approx. 8.5 - 12 min at a chain speed of 3.2 m/min Technical data (overview of indicative project) System type: Semi-automatic batch system Max. workpiece size: 1,500 x 500 x 500 [mm] (individually scalable) Load capacity / carrier: 100 kg (higher loads can be designed) Oven temperature: max. 220/250°C; operating temperature 180-200°C Heating for dryer/oven: Gas, oil, or electric (indirect) Max. power consumption: 88 kW (depending on system size) Control: PLC (e.g. Siemens) System components overview: Chemical pre-treatment (3-zone spray cleaning): Compact 2-chamber spray tunnel made of stainless steel for degreasing/phosphating (or alternatively nanoceramic) (40 - 45°C) as well as 2-stage rinsing. Complete with stainless steel pumps, PPR nozzle bars, and extraction (4,000 m³/h). Flash-off oven & powder curing oven: Two thermally insulated chambers (100 - 150 mm rock wool) with indirect electric heating (thermoblock with 16 or 30 kW), stainless steel combustion chambers, and powerful air circulation. Dryer up to 120°C, oven up to max. 220/250°C (automatic lift-up doors optional) Mobile powder spray booth: Pgedpfxsulwg Ne Alwot Mobile, open coating booth (2,000 x 2,100 x 2,200 [mm] with ATEX extraction (6,000 m³/h). Integrated filter unit with 4 pulse valves for cleaning, absolute after-filter, and mobile 60 l powder container. Note: Fully enclosed powder booths are also available! Conveying technology & control: Driven cardan chain conveyor with frequency inverter and automatic lubrication unit. Control via PLC for complete control and adjustment of all system processes (control cabinet equipped with Siemens/Schneider) Scope of supply: Complete system including customer-specific design, assembly, and on-site training.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG60SB-13594, total width: 4,030 mm, total length: 7,000 mm, overall weight: 2,500 kg, input current: 11 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 3,300 mm, feed length Y-axis: 6,100 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Bottero float cutting table (shapes) 2-19mm, max cutting size L6100x3300mm Psdpfxoxrmpme Alwjgt Dimensions: L7000xW4030mm, weight +/-2500Kg

Condition: new, Year of construction: 2026, CORMAK ZS-40B Industrial Pillar Drill The CORMAK ZS-40B is a technologically advanced industrial pillar drilling machine designed for intensive metalworking applications in workshops and production facilities. Equipped with a precision oil-bath gearbox, automatic vertical feed, and tapping functionality, the CORMAK ZS-40B metal drill press delivers reliability, efficiency, and outstanding drilling and threading performance. Key Advantages Automatic vertical feed – three feed rates (0.12, 0.18, and 0.25 mm/rev) allow optimal adjustment of cutting parameters to suit different materials. Tapping function with automatic spindle reversal – enables efficient internal thread cutting up to M32 without operator intervention. Oil-bath gearbox with hardened and ground gears – ensures smooth, quiet operation and long service life of the drive system. Rigid 115 mm diameter column – minimizes deflection and vibration, resulting in higher machining accuracy. Large rotating worktable with height adjustment – allows machining of large and irregularly shaped workpieces. Integrated cooling system as standard – improves drilling quality, extends tool life, and reduces the risk of overheating. Construction and Technology The CORMAK ZS-40B industrial drill press is engineered for continuous operation in demanding production environments. At its core is a mechanically driven gearbox lubricated in an oil bath, providing stable and reliable power transmission. The MT4 spindle taper accommodates a wide range of drilling and tapping tools, while the high rigidity of the spindle head and column assembly ensures precise hole machining. A transparent plexiglass chuck guard enhances operator safety while maintaining full visibility of the machining area. Precision and Productivity The automatic feed system enables repetitive drilling operations without operator fatigue, significantly improving productivity in serial production. The spindle speed range from 95 to 1600 rpm, combined with six gearbox speeds, allows precise adjustment of machining parameters to match the material and tooling requirements. A precision handwheel with depth scale provides accurate control over drilling depth. Applications The CORMAK ZS-40B drill press with tapping function is an ideal solution for: Manufacturing and assembly plants Mechanical and metalworking workshops Maintenance departments Tool rooms and training centers Standard Equipment 16 mm drill chuck MT4 arbor MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Cooling system with pump Plexiglass spindle guard Handwheel with graduated scale Technical Specifications Parameter Value Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Column diameter 115 mm Pgodpfx Aloridv Sjwot Distance from spindle axis to column 260 mm Maximum spindle-to-table distance 754 mm Maximum spindle-to-base distance 1270 mm Spindle speed range 95–1600 rpm Number of speeds 6 Automatic feed rates 0.12 / 0.18 / 0.25 mm/rev Worktable dimensions 354 × 575 mm Overall height 2120 mm Motor power 1.1 kW (S1) / 1.6 kW (S6) Power supply 400 V / 50 Hz Weight 410 kg

Condition: new, Year of construction: 2026, CORMAK ZS-40HS Pillar Drill The CORMAK ZS-40HS is an advanced pillar drilling machine for metalworking, designed for intensive industrial use. Featuring a hardened gear transmission system, large drilling capacity, and tapping capability up to M32, this model is a reliable solution for manufacturing plants, metalworking shops, and maintenance departments. Key Advantages Large drilling capacity – up to 40 mm – suitable for machining a wide range of materials and thicknesses. Tapping function with automatic spindle reversal – enables fast and efficient thread cutting up to M32. Precision oil-bath gearbox – 6 spindle speeds provide optimal speed adjustment (95–1600 rpm) for various machining operations. Rotating head with height adjustment – increases flexibility and allows drilling at different angles. Rigid 115 mm diameter column – ensures excellent stability even under maximum load. Large worktable with height adjustment and vise mounting capability – facilitates machining of large workpieces. Construction and Technology The CORMAK ZS-40HS industrial drill press is built with heavy-duty cast iron components and a reinforced 115 mm diameter column, ensuring maximum rigidity and vibration reduction. The transmission system is based on hardened, precision-ground gears, providing exceptional durability and reliable power transmission. The 120 mm spindle travel and MT4 spindle taper allow the use of a wide range of drill bits and tapping tools. Precision and Performance The CORMAK ZS-40HS metalworking pillar drill offers high drilling accuracy and repeatability thanks to its mechanical gearbox and precision handwheel with depth scale. Flexible adjustment of both the drilling head and worktable height allows the machine setup to be tailored to specific machining requirements. The powerful motor (1.1 kW continuous duty S1, 1.6 kW intermittent duty S6) ensures efficient operation even when drilling large diameters. Applications The CORMAK ZS-40HS column drilling machine is designed for industrial applications, particularly in: Manufacturing and processing plants Metalworking workshops Maintenance departments Tool rooms Technical schools and training centers Standard Equipment 16 mm drill chuck MT4 arbor Podpjriduxofx Alwegt MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Technical Specifications Parameter Value Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Spindle travel 120 mm Column diameter 115 mm Spindle speed range 95–1600 rpm Number of speeds 6 Worktable dimensions 575 × 354 mm Base dimensions 385 × 330 mm Motor power S1: 1.1 kW / S6: 1.6 kW Power supply 400 V / 50 Hz Overall height 2100 mm Weight 350 kg

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Psdpjfz Dubsfx Alwsgt - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Bending machine from the only and reliable manufacturer PROD MASZ® High-precision folding machine for steel, copper, zinc and aluminum sheets. These press brakes and all common spare parts are available from stock. Folding bench RED-2200/0.8 incl. transport rollers Bending machine Folding bench with side cutouts for bending from top to bottom. Thanks to him you will finish your window sill. In the machine construction there is a place for curved processing at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm - Bending performance: up to 0.8 mm (steel sheet) - all non-ferrous metals 30% more bending capacity - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 m - lifting of the upper beam in three positions - Upper beam stroke: 80 mm degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: about 250 kg The roller scissors (max. cutting capacity 0.8 mm / steel) Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee. Price: 2200 euros Delivery date: every week Pgjdpfx Aecv S Dtjlwot We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.