Inkjet printer

W&W

Condition: excellent (used), For sale: Professional, portable vibration calibrator from the renowned manufacturer PCB Piezotronics. Model: 394C06 Serial number: LW19236 Made in: USA The calibrator is designed for rapid verification and calibration of accelerometers in industrial, laboratory, and automotive (NVH) applications. — Technical and visual condition The device is in very good condition and well-maintained. Manufacturer's seal is intact (VOID IF SEAL DAMAGED). Normal, minimal signs of use. The equipment comes from a professional measurement environment. — Features and characteristics • Portable vibration calibrator • RMS / PEAK mode • CAL adjustment (+ / -) • Stable reference signal for sensor verification • Battery powered – ideal for field work • High repeatability and measurement accuracy — Applications • Accelerometer calibration • NVH systems (Noise, Vibration, Harshness) • Industry, automotive, laboratories • Maintenance, quality control — Included in the set • PCB Piezotronics 394C06 calibrator • Original transport case • Protective cover • Adapters / mounting accessories (as shown in the photos) Nedpjyc Igvsfx Adwscl

Condition: new, Year of construction: 2025, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Product alignment for square bottles Top belt guide for square and oval products Ncodpfx Adeu Ia E Iswel Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc.

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 Nodpfx Adjycktrowjcl MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: used, Year of construction: 2014, Overview The handle applicator was manufactured by the German company B&W Solutions GmbH in 2014 and until now it was part of a PET filling line for water.  Technical data  Total output: 45 cycles/min one lane length 3660 mm | width 1790 mm | height 2500 mm recommend specifications: Adhesive Strips: Width: 25 mm, Thickness: 78 μm, Adhesion to PE: 30 N/cm², Elongation: max. 40% Paper/Cardboard Strips: Thickness: 180–350 g/m², Width: 20–25 mm (±0.4 mm), Length: 150–240 mm (±0.4 mm) Nedpfx Aeyb Sm Dsdwjcl

Condition: like new (used), Year of construction: 2017, 1. Machine: ENGEL VICTORY 500T / 7050 (Year 2017) 2. 3. Year of manufacture: 2017 4. Control unit: CC300 5. Operating hours: 565 h 6. Availability: Immediate 7. 8. Clamping Unit: 9. Clamping force: 500 tons 10. Opening stroke: 1100 mm 11. Distance between tie bars: 1500 × 1285 mm Njdpfsxvingjx Adwjcl 12. Platen size: 1500 × 1285 mm 13. Minimum mould height: 500 mm 14. Maximum daylight (open distance): 1600 mm 15. 16. Injection Unit: 17. Screw diameter: 120 mm 18. Screw length (L/D): 22 D 19. Injection volume: 5430 cm³ 20. Maximum injection pressure: 1600 bar 21. 22. General Data: 23. Motor power: 98 kW 24. Heating power: 30 kW 25. Clamping unit weight: 31 tons 26. Injection unit weight: 15 tons 27. Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m 28. 29. Options: 30. Core pullers: 3 31. Robot interface: No 32. Bi-metallic screw/barrel: Yes 33. Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones 34. 35. Note: 36. The machine has very low operating hours (565 h) and belongs to the modern ENGEL Victory tie-bar-less series, ideal for large moulds and high-precision production.

Condition: used, pressure 45 t Ncjdewgi Rxspfx Adwsl throat 230 mm stroke 8-96 mm total power requirement 4 ps

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Pallet conveyor line with turntable and two pallet outfeeds – 55 m. Conveyor – 6 m. Turntable – 1.5 m. Pallet outfeeds – 2.5 m. The system is designed for pallets measuring 120x80 cm and 120x100 cm. The system is fully operational, without automation or control system. Njdoychacjpfx Adwjcl

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 1750 kg sawing motor: 2,2 kW total power requirement: 5 kW cutting speed: 17 - 90 m/min cutting diameter: 320 mm cutting range max.: 320 x 320 mm saw band length: 4.930 x 34 x 1,1 mm feed length: max 9x 600 mm dimensions of the machine ca.: 2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm Njdovpt Eyjpfx Adwecl operating manual, *

Condition: new, maximum load weight: 30,020 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 11,560 mm, loading space width: 2,480 mm, loading space height: 2,566 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, H&W Walkingfloor semi-trailer 70m³ agricultural Availability: approx. 5 months from receipt of order Moving floor system: # 15-board system # Radio remote control # 10mm grooved floor boards # Hydraulic connections on the bulkhead & at the support winches Superstructure: # 30mm aluminum hollow profile body # Side walls continuously welded (grain version) Nodpfsgimytsx Adwocl # 2 crossbars # Integrated grain outlet # Rear plate of the floor system folds downwards # Door beam can be swiveled and operated from below # Cleaning door in the front wall on the left # Rear viewing window Chassis & axles: # SAF axles with 22.5 inch disc brakes # Wabco EBS 4S/2M brake system with RSS # Wabco ECAS air suspension system # 6 x brand tires 385/65 R 22.5 on steel rims in silver # 1st & 3rd axle as forced steering axle Tridec # Galvanized steel chassis # Chassis color: Hot-dip galvanized Further equipment & accessories # Aspöck 24V lighting # 4 x LED work lights switched via reverse gear # Aluminum single ladder 3.00m

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Ncedpfx Ajwzvzyjdwel Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 019, IDE single screw PVC extruder Ncodpfx Adsxgh H Ajwsl

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 411 mm, Tested forklift battery for your forklift - 48V 3PZS 375Ah - DIN A + 1-year warranty + Includes Aquamatik watering system + Includes end connectors & REMA 320 plug (other plug types can be installed on request) + Capacity: min. 90-100% (C5 capacity test protocol included with delivery) + Year of manufacture: 2024 Dimensions: Length: 827 mm Width: 411 mm Height: 625 mm Weight: approx. 560 kg Suitable for the following models and others: Linde E 16 - 386-00 Linde E 18 - 386-02 - side battery change Linde P 50 Z LONG - 368-00 Linde P 60 - Linde P 60 - side battery change Linde P 60 Z - 126-00 Linde P 80 - Linde P 80 - side battery change LInde T 30 R - 143-00 Linde W - side battery change Still LTX 70 Still R 06-06 Jungheinrich EZS 570 Crown RT 3000 Crown SC 1013 Crown SC 1016 Crown SC 3013 Crown SC 3210 Crown SC 3210-1.3 Crown SC 5310-1.3 Ncedpfx Adswzvtijwjl Crown SCT 6010 Nissan AS2N1L13Q OM-Pimespo-Fiat XE 12 Simai TE80IXB Common battery sizes available – please enquire. Transport available.

Condition: used, maximum load weight: 15,100 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 07/2018, loading space length: 13,630 mm, loading space width: 2,500 mm, loading space height: 3,140 mm, Equipment: ABS, * Edscha sliding roof * Air suspension * 2-axle * Twin tires * 15,000 kg payload Njdpfx Adoxvkvrewocl Internal vehicle number: 9328----Errors and interim sale excepted. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp.

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 Ncodpfx Adswivdkjwol extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Condition: excellent (used), Year of construction: 2021, turning diameter over cross slide: 840 mm, turning length: 6,000 mm, spindle bore: 105 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 7,000 m/min, 3 chuck SCHUNK ROTA-S Plus 500-102 3 x Steady rest fixed Revolver VDI Duplomatic Siemens 840 DSL This type of lathe is commonly used in industries like: Oil & gas (pipe threading, tool joints) Steel industry (roll turning)  Power generation (turbine shaft turning)  Heavy machinery manufacturing DBC Turning Length: 6000mm Swing over bed Ø: 840mm Swing over cross slide Ø:570mm Ncodpfx Adjx Sqaxewol Spindle bore: 105mm Spindle power: 33kW Bed width: 450mm Tailstock spindle Ø: 220Ø Spindle taper: 5Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 7000mm/min. Workpiece load: 2500 Length: 9500mm Width: 2300mm Height: 2300mm Weight: 8600kg