Stainless steel screw conveyor

Waeschle DST 150 2960/300/H600 mm

Condition: used, Year of construction: 2014, Industrial robot Manufacturer: Kuka Model: KR210 R3100 ultra with 4.5 m linear axis Hsdpfxsxuwlwe Akrsl Year of manufacture: 2014 Reach: 3,196 mm Weight: 1,154 kg Payload: 210 kg Kuka Control System KRC4 Year of manufacture: 2014 Weight: 163 kg Software: KSS 8.5.4 Kuka TouchPad KCP4 Kuka connecting cables Kuka linear axis Type: KL1500-3 T Year of manufacture: 2013 Length approx. 4.5 m Travel stroke approx. 3.5 m KRC4 cable drag chain Weight: 2,200 kg ä17426

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Hodpfx Akefu Ivzsrsl Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 3000mm Cutting channel opening: 1200mm Hodpfx Aken I Rgpsrol Motor power: 15kW Cutting force: 50to Order goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition. Hedpfx Akex I Ecmsrsl

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Hodsvf E Avjpfx Akrol Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Width: 1000mm Height: 1900mm Hsdpfx Akjhzgtuerel Weight: about 100kg

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Incl. Sampling unit specicon Hedpfx Aoir E E Eekrsl

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Hedjt S Sxgopfx Akrol Drive via geared motor

Year of construction: 2024, condition: new, Overband plate magnet with cleaning mechanism execution in VA 1.4301 tight welded incl. drawer for cleaning dimensions: 800x500x180mm 4 - pieces M16 eyebolts on the backside These two lifting magnets were used by one of our customers as "police magnet" in the meat processing industry. Both overband magnets are in a perfect condition. The mentioned price refers to 1 piece. Currently still 2 pieces available from stock! All information without guarantee, only while stocks last! conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence is to deliver exactly what the customer needs. Together with our customers, we work out customer-specific, individual solutions and deliver corresponding systems from our own production. Please contact us by phone to find a suitable solution for your application. Hjdpfjhfwmdox Akrel Overband plate magnet Execution in VA 1.4301 tightly welded incl. drawer for cleaning 420 x 420 x 200mm 420 x 420 x 250mm 620 x 420 x 200mm 620 x 520 x 200mm 800 x 500 x 200mm 800 x 520 x 250mm completely welded stainless steel housing to protect the magnetic core ring eyelets for suspension Cleaning drawer for easy removal of accumulated impurities. Mounting via

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty. Hjdjtvat Tspfx Akrel