CNC roll/turbine lathe

WALDRICH SIEGEN DH 1600 x 12000

Condition: good (used), Year of construction: 2000, Daewoo Puma 230, year of manufacture 2000, Fanuc 18 iT control, turning length 548 mm, Gjdpswx I Efofx Ah Dokf turning diameter 350 mm, 10-position turret, tailed tailstock, three-jaw chuck Ø 254 mm, tool measuring arm, swarf conveyor, coolant system, main spindle newly mounted, flat guides, accessories,

Condition: used, Year of construction: 2015, machine/vehicle number: 5319, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,300 mm, BASIC MACHINE PowerSpeed 5 WITH FORK HEAD – KEY TECHNICAL DATA Travels: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive via a centrally bolted rack. Hardened compact roller guides ensure high precision. Machine base (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamic performance and accuracy. Protected by telescopic steel covers. Headstock slide and headstock: Made of GGG 60 cast iron, guided by compact roller guides. Optimal power transmission thanks to long guideways and close arrangement of the Y and Z axes. Dual-spindle drive: Two vertical ball screws with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Individual digital drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring system: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-axis yoke head with motor spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5″ C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3″ Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230V, 50Hz, 80kVA power rating. Control cabinet (IP54) with control and switching devices. Machine-to-cabinet cable length: 5m. Control cabinet cooling: Two-chamber system with automatic internal air cooling and dehumidification. Lubrication: Centralized lubrication for guides, permanent grease lubrication for the main spindle, oil mist lubrication in the milling head. Power supply: Compressed air 4–6 bar, G 1/4 connection, with filter pressure regulator and condensate separator. Control: Siemens 840D sl with swiveling control panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote maintenance: Fault diagnosis via alarm manager, notification via email/SMS (SIM card and network required). TightBlock base frame (X = 8,000 mm): Solid composite construction for damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm of X-travel, structurally tested. Coolant system: Gedpfjwdub Dox Ah Dskf 500 l tank, filter system

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, roller (bottom) diameter: 495 mm, roller (top) diameter: 515 mm, side roll diameter: 355 mm, roller diameter: 495 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 60 mm, overall weight: 29,200 kg, total length: 5,770 mm, total width: 2,390 mm, total height: 2,760 mm, power: 55 kW (74.78 HP), Equipment: documentation/manual, Interchable top roller 410mm Gedpfev Nhkwjx Ah Dokf

Condition: good (used), Year of construction: 2002, machine/vehicle number: 120K587, Hello, Gsdpfspfawhox Ah Dekf For sale is a well-preserved Quaser MV204II universal CNC milling machine with HEIDENHAIN control at an unbeatable price-performance ratio The purchase price includes: tool changer, measuring probe, chip conveyor, coolant system, hydraulic system, documentation/machine documents, etc... Data machine dimensions Height: 2,825mm Width: 2,650mm Length: 2,200mm Weight: 7,500Kg Data travel paths X-axis travel: 1,020mm (feed speed 32,000mm/min) Y-axis travel: 600mm (feed speed 32,000mm/min) Z-axis travel: 560mm (feed speed 32,000mm/min) Milling table data Milling table size: 635 x 1,200mm Milling table loading capacity: 1,000Kg Table configuration: 6 x 18mm H 8 T-slots Milling spindle data Max. spindle speed: 7,500 / 10,300 1/min Max. spindle torque: 252Nm All further data available on request by email!!! Viewing appointment possible. Best regards

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min • Table load: 4,000 kg/m² • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm • Tool holder: HSK63A • Tool changer: 24 positions Gkedpsxlip Asfx Ah Def • C-axis: ±360° • A-axis: +95° / -110°

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. Gedpfswl Ag Dox Ah Dekf It has automatic door and Matris robot R-2000iC/165F. *

Condition: like new (used), Year of construction: 2012, operating hours: 6,589 h, functionality: fully functional, We are selling a beautiful POSMILL E1100 machining center, built in 2012. The machine has few spindle hours (6,589) and was used for single-part production. The machine is ready for demonstration with power at the delivery point. Technical specifications: X-axis 1,100 mm Y-axis 600 mm Z-axis 510 mm Spindle/table distance 120-630 mm Table dimensions 1,300 x 600 mm ITNC 530 control system - ITNC 530 control system - 35.1 tool measurement system - Workpiece measurement system with probe - Linear measuring system in all axes - Internal coolant supply for internal machining - Various tools with holders - Chip conveyor Gkodpswkhy Tofx Ah Djf - Filter system - Workshop trolley with holder - Vice

Condition: new, The Sinus 330/2000 D is a top-tier Conventional Horizontal Lathe within the Engine Lathes category, renowned for its robust design and superior precision. Built on a solid, one-piece cast bed, this machine ensures remarkable rigidity and stability even under heavy workloads. It features a manual multi-disc clutch for smooth operation and can handle large workpieces, with a turning diameter over the bed of 660 mm and a maximum workpiece length of 2,000 mm. Highlighted by its hardened guideways, the Sinus 330/2000 D operates quietly while providing high cutting power, making it ideal for machining large parts and flanges. Additionally, it includes a removable bed bridge for versatility, automatic lubrication for optimal performance, and a tapered turning device for enhanced functionality. With standard equipment that encompasses a three-axis position indicator, efficient coolant system, and rapid feed capabilities on both Z and X axes, this lathe stands out in both functionality and user safety. You can request a quote to explore how the Sinus 330/2000 D can meet your machining needs within the Engine Lathes product group. Gkodpfx Ahju E Nhgo Def

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x330x245 cm Gkedpfx Ahou A I Els Djf weight of the machine ca. 5,5 t Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Motor power: 7.4 kW

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, torque: 1,178 Nm, coolant supply: 36 bar, Equipment: documentation/manual, rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Gjdpfx Ahjhy Au Io Dokf Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) Work Table: Plate table / rotary table / pendulum machining (depending on configuration) Additional Equipment: Tool changer with double gripper, 40 stations Hinged belt chip conveyor (longitudinal) Work table per customer specification: plate table / rotary table / pendulum machining Accuracies: Positioning accuracy: ±0.030 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.